eGo ONE tank series – CLR coil

Status
Not open for further replies.

Dieseler

ECF Guru
ECF Veteran
Verified Member
Sep 24, 2011
17,341
14,062
Illinois

Dieseler

ECF Guru
ECF Veteran
Verified Member
Sep 24, 2011
17,341
14,062
Illinois
Puf - no i always tighten the coils down tight , i tried the pliers trick and heard faint snap i'm a 1/3 of the way through tank so far so good .Will see when it gets down low while watching the C. Blackhawks game later on.
Thanks again as i never gave that any thought.
 

Dieseler

ECF Guru
ECF Veteran
Verified Member
Sep 24, 2011
17,341
14,062
Illinois
Someone asked how often does one change there wick, kinda depends on how many one has in rotation how much they vape etc etc were all different. I rotate 4 of the mega tanks and when i refill i look at the wick if its narly looking i just pull out and replace it just so easy to do so..........
 

ChelsB

Vaping Master
ECF Veteran
Verified Member
Dec 12, 2016
7,848
40,893
California
Someone asked how often does one change there wick, kinda depends on how many one has in rotation how much they vape etc etc were all different. I rotate 4 of the mega tanks and when i refill i look at the wick if its narly looking i just pull out and replace it just so easy to do so..........

That was me [emoji4]. I know there are many variables but I just was curious. Yes re-wicking is easy peasy!
 

Dieseler

ECF Guru
ECF Veteran
Verified Member
Sep 24, 2011
17,341
14,062
Illinois
Wanted to pick up some more of the older joyetech 4ml mega tanks the ones with the large slotted windows.
I did place an order a good while back out of country and did get them at the time for 4 of them @ 9.99 and recently site said out of stock now so i put in ticket and reply was they are the old ones (i know) and no longer being available.Oh well, did call another in country vendor and was told they were getting some by end of
week nothing yet though.

Probably have more than i need already but .........
 

pufZeppelin

Vaping Master
ECF Veteran
Jul 6, 2013
7,610
24,603
Florida, SW
what concerns me is; on Joyetechs www site, they NO LONGER even show the eGo ONE as an option... :shock::shock: (cubis has replaced)

upload_2017-2-11_18-32-24.png
 

MikeADore

Ultra Member
ECF Veteran
Feb 26, 2016
1,829
12,132
72
Tennessee
Cubis is a poor replacement..............
For just about anything as far as I'm concerned unless you can find something that actually gurgles and leaks more than they do...and don't get me started on that tiny little screw in the rebuildable head.

ETA: In fairness, I haven't tried the Cubis Pro that Joyetech is pushing so much these days.
 
Last edited:

MikeADore

Ultra Member
ECF Veteran
Feb 26, 2016
1,829
12,132
72
Tennessee
for WHAT-EVER they are thinking, I have NO NEED for the cubis tank :facepalm:

guess what I'm really sayin' , if one wants to try or maintain the eGo ONE life style - better make the decision to stock up for the long run sooner than later... :unsure::(:unsure:
Puf, I think we discussed this one other time, but it seems Joyetech was very ambivalent about promoting or even stocking the eGo One tanks. Even when the V2 came out, they didn't seem to be nearly as widely available as some other tank releases. And, almost as soon as the V2 hit the market, they decided to put the Cubis Pro on the Evic Mini kit. Odd in my book, but I'm sure it made economical sense to them.

I have nine eGo One tanks. I'm now down to color coordinating...:-x Hey, a dude needs white and red in his atty ensemble.
 

Foggy Road

Vaping Master
ECF Veteran
Verified Member
Jun 22, 2015
4,048
15,790
71
Garland,TX
for WHAT-EVER they are thinking, I have NO NEED for the cubis tank :facepalm:

guess what I'm really sayin' , if one wants to try or maintain the eGo ONE life style - better make the decision to stock up for the long run sooner than later... :unsure::(:unsure:

I've got a Cubis. And have no need for it. Never had a coil or a drop of juice in it.
 

pufZeppelin

Vaping Master
ECF Veteran
Jul 6, 2013
7,610
24,603
Florida, SW
Puf, I think we discussed this one other time, but it seems Joyetech was very ambivalent about promoting or even stocking the eGo One tanks. Even when the V2 came out, they didn't seem to be nearly as widely available as some other tank releases. And, almost as soon as the V2 hit the market, they decided to put the Cubis Pro on the Evic Mini kit. Odd in my book, but I'm sure it made economical sense to them.
I have nine eGo One tanks. I'm now down to color coordinating...:-x Hey, a dude needs white and red in his atty ensemble.


haha
, I just ordered 9 M-O-R-E two weeks ago (then 4 Trons last week)

and I can't even say how many of the old school 19mm 1.8ml/2.5ml & 22mm megas are on hand that I have had for a year or more...
have them stuck all over the place, someday will have to get them all in ONE location

I'll just say I'm good to go
:w00t:
 

pufZeppelin

Vaping Master
ECF Veteran
Jul 6, 2013
7,610
24,603
Florida, SW
upload_2017-2-11_22-46-11.png
so I have been messin' with this new INNOKIN Smart Box (auto power output)
and it turns out .75Ω coil does work just as I like it (very nice)

what I was trying to do was use up my LARGE stash of 29g Kanthal to make the .75Ω coils since the Smart Box is not TEMP CONTROL
but that is not gonna work because it means the ID of the coil has to be 2.0mm or less :grr: (no way for me)
I bought o-plenty of 29g kanthal BEFORE I realized how cool SS 316 wire is :wub: - so I need to use it up (29g) :unsure:

:smokie:
 

pufZeppelin

Vaping Master
ECF Veteran
Jul 6, 2013
7,610
24,603
Florida, SW
Just had my first successful TC experience. (First time I tried coil blew out like an old time flash bulb:shock:).

Not impressed. Maybe it's the Mod, but the way TC pulses don't do nuthin fer me.

very nice

what device are you using ??
tell me your settings, maybe we can help 'dial-it-in' for that way cool TC experience...

:w00t::)
 

NotSoMini

Resting In Peace
ECF Veteran
Jul 13, 2014
3,367
13,654
I have a question. I don’t know if anyone has experienced this or not with the Ego One Mega. No matter what mod I put the tank on, it is not seeing the atomizer. The mods are capable of handling 1.0 ohms so I know this is not the issue. I have even tried tightening down the coil but still no luck. Is it possible I have a bad coil?
 

Foggy Road

Vaping Master
ECF Veteran
Verified Member
Jun 22, 2015
4,048
15,790
71
Garland,TX
very nice

what device are you using ??
tell me your settings, maybe we can help 'dial-it-in' for that way cool TC experience...

:w00t::)
Smok R-Steam Mini. set to 'steel'. Hit setting 'Norm' had it up to 330F Just the pulsing was so noticeable that it was annoying. 25mm atty won't fit the Pico to find out if there's a diffwerence.
 
Last edited:
Status
Not open for further replies.

Users who are viewing this thread