eGo ONE tank series – CLR coil

[Dieseler]

So there is no gasket in the Mega VT chimney tube ?
Looking at joyetech and fastech site its not clear enough to tell.

 

[pufZeppelin]

I love the name Princess Penelope! Here's mine with her satin prince!

looking groovy...

so how do you like it ? have ya rolled a SS coil for it yet and kick-in TEMP CONTROL - it does it very well IMO
(looks like your battery cap ain't right)

 

[ChelsB]

looking groovy...

so how do you like it ? have ya rolled a SS coil for it yet and kick-in TEMP CONTROL - it does it very well IMO
(looks like your battery cap ain't right)

That's what I love about you guys, you catch EVERYTHING! Yes, there's a button top in there so it's not closing all the way. I have some flat tops on order

 

[pufZeppelin]

So there is no gasket in the Mega VT chimney tube ?
Looking at joyetech and fastech site its not clear enough to tell.

there is a silicone washer in the v2 tank chimney tube that wasn't there in the v1

you mean here, right ?

 

[Dieseler]

there is a silicone washer in the v2 tank chimney tube that wasn't there in the v1

you mean here, right ?

View attachment 635529

Yes but is that gasket in the Mega VT tank?

 

[pufZeppelin]

That's what I love about you guys, you catch EVERYTHING! Yes, there's a button top in there so it's not closing all the way. I have some flat tops on order

OK gotcha...

be careful , not only does it not close - but it looks crooked to me (don't cross-thread it)

 

[ChelsB]

OK gotcha...

be careful , not only does it not close - but it looks crooked to me (don't cross-thread it)

Should I just take it out and wait for the flat top? Is it a safety issue?

 

[pufZeppelin]

Yes but is that gasket in the Mega VT tank?

it is IN the Ego ONE Version 2 tank , regardless of designation...

the V1 tank did not have one...

 

[pufZeppelin]

I'd just be sure I 'caught' the threads STRAIGHT and NOT over-tighten

remove tank and concentrate on battery cap - then put tank back on...

 

[pufZeppelin]

do you agree this is crooked, or am I just seeing things ?? (might be optical illusion)

as long as you get battery in square, a button top should be no issue at all...

​

 

[Dieseler]

Thanks i have the V1 version no gasket so this 1 has a gasket then - thanks.

 

[ChelsB]

Here's a closer up. You must have good eyes cause it look straight to me![emoji4]

 

[pufZeppelin]

Thanks i have the V1 version no gasket so this 1 has a gasket then - thanks.

yepper, for whatever reason Joyetech decided to include the silicone washer in the v2
funny to me because I had no issues with v1 and that would just mean more unnessasary cost to them... their research must of shown SOMETHING... ?

 

[pufZeppelin]

this is what shows on my screen, makes my mind go waaaaahat !

 

[ChelsB]

this is what shows on my screen, make my mind go waaaaahat

View attachment 635539

When you put it that way, I can see it. Still, you have excellent vision!

 

[pufZeppelin]

that stuff sticks out to me and then OCD bothers me

 

[Dieseler]

Since its Valentines day here is redddish nano vt and pico , come black friday i show the black version ; ) nano is my favorite as i can set it to have the first second or 2 ramped up in wattage to preheat coil but pico not far behind.
Despite the - about screwing the battery cap with all of mine i cleaned out threads and they work just fine , there was a lot of very fine metal savings in the threads .

 

[pufZeppelin]

Since its Valentines day here is redddish nano vt and pico , come black friday i show the black version ; ) nano is my favorite as i can set it to have the first second or 2 ramped up in wattage to preheat coil but pico not far behind.
Despite the - about screwing the battery cap with all of mine i cleaned out threads and they work just fine , there was a lot of very fine metal savings in the threads .

I can dig it...

you have to be careful (very careful) with the metal on these cheap devices

don't take MUCH to ruin a device bad...

I clean ALL MY THREADS and apply dielectric grease - it makes a diff... (battery charger too)

 

[Katya]

I clean ALL MY THREADS and apply dielectric grease - it makes a diff... (battery charger too)

You do what?!?!

I used to apply Noalox on the threads of my ProVari, because they recommended it, but I hated how it turned black and gunky after a while... I just clean all my connections with Iso. Should I really use dielectric grease? And if so, what kind? Conductive? Non-conductive?

Would a dab of Vaseline do?

Happy V-Day, y'all! ♥

 

[Shawn Hoefer]

You do what?!?!

I used to apply Noalox on the threads of my ProVari, because they recommended it, but I hated how it turned black and gunky after a while... I just clean all my connections with Iso. Should I really use dielectric grease? And if so, what kind? Conductive? Non-conductive?

Would a dab of Vaseline do?

Happy V-Day, y'all! [emoji813]

Nah... dielectric grease on electrical contacts works wonders.

Sent from my SAMSUNG-SM-N910A using Tapatalk