Sale at MFS
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
eGo ONE tank series – CLR coil
- Thread starter pufZeppelin
- Start date
- th_trl_thread_readers 0
- Status
It does!
VL...you may need a different bank account...
When I ordered the $40-$50 TC60W KIT...for $22...my bank account gave me a BIG...
So...ECR coil...1.0Ω...VapeShop $2.95 for one...FT $7.42 for 5-pack...
Has anyone run across a USA site selling 5-packs???
[ Vapecrawler is of NO help.]
..
Sweet-Vapes.com
Not sure why I'm not able to edit my post about Sweet-Vapes. I made a mistake. I thought the poster was asking about where to find the CLR coils, not the ECR coils. Sweet-Vapes has the CLRs, but I have no idea where ECR coils can be found.
All I can say is....... take a number and stand in line when this lil cutie comes out in a nano.
No shoves, and no buts. Back behind DPL and I, k?
No shoves, and no buts. Back behind DPL and I, k?
Another question.....when you place the order do you have to pick the airmail option in the shipping part? Or do they just take care of it for you?Order placed yesterday and shipped today paypal refunded as well as promised.
Its nice to only use 1 type of coil head for our vaping needs .
Chanting clr clr clr !
tia
Are they panning a nano? I checked their website but didn't find any info about that.All I can say is....... take a number and stand in line when this lil cutie comes out in a nano.
No shoves, and no buts. Back behind DPL and I, k?
If they come out with one I will be so tempted even though it will be so expensive and I don't need one.
It would probably be in the $70(ish) range, I expect? I guess we'll find out.
(I brought plenty for everyone, and can make more).
Just a little Egg Roll plug here.
This is a coil that I overfilled with cotton, about three wicks ago. In attempting to remove the cotton I disfigured to an absurd degree, literally almost lifting it completely out of its little nest.
For S&Gs, I decided to see if I could jam it back down, squeeze it some, and straighten it with a mandrel. I fully expected that it would my first one that I had to throw into my "re-coil" bag. So far (knock-knock), I was wrong.
I took these pics last night, as I was re-wicking it again (either the 3rd or 4th time since ripping it to shreds). You can see that it looks like it's on the back-end of a bender (all hungover and can't see straight), but it keeps ringing up at 1.00. Therefore I'm going to keep using it until it shows some signs, and will likely miss it when it finally "blinks out".
It's also vaping perfectly well. So well, in fact, that I had no idea which tank it was in. It is completely indistinguishable from my other CLR coils, vape-wise.
When I finally came across it last night, I recognized it immediately (tough to miss). I don't know how much longer it can possibly last, but it's simply another notch in the, "These coils are absolutely amazing!" lipstick case.
For your visual entertainment I now give you, The Little Coil That Could (no-way, no-how!). Who knew!
CLRs FTW. Best coil ever? They just might be prezactly that.
This is a coil that I overfilled with cotton, about three wicks ago. In attempting to remove the cotton I disfigured to an absurd degree, literally almost lifting it completely out of its little nest.
For S&Gs, I decided to see if I could jam it back down, squeeze it some, and straighten it with a mandrel. I fully expected that it would my first one that I had to throw into my "re-coil" bag. So far (knock-knock), I was wrong.
I took these pics last night, as I was re-wicking it again (either the 3rd or 4th time since ripping it to shreds). You can see that it looks like it's on the back-end of a bender (all hungover and can't see straight), but it keeps ringing up at 1.00. Therefore I'm going to keep using it until it shows some signs, and will likely miss it when it finally "blinks out".
It's also vaping perfectly well. So well, in fact, that I had no idea which tank it was in. It is completely indistinguishable from my other CLR coils, vape-wise.
When I finally came across it last night, I recognized it immediately (tough to miss). I don't know how much longer it can possibly last, but it's simply another notch in the, "These coils are absolutely amazing!" lipstick case.
For your visual entertainment I now give you, The Little Coil That Could (no-way, no-how!). Who knew!
CLRs FTW. Best coil ever? They just might be prezactly that.
Last edited:
Amazing!Just a little Egg Roll plug here.
This is a coil that I overfilled with cotton, about three wicks ago. In attempting to remove the cotton I disfigured to an absurd degree, literally almost lifting it completely out of its little nest.
For S&Gs, I decided to see if I could jam it back down, squeeze it some, and straighten it with a mandrel. I fully expected that it would my first one that I had to throw into my "re-coil" bag. So far (knock-knock), I was wrong.
I took these pics last night, as I was re-wicking it again (either the 3rd or 4th time since ripping it to shreds). You can see that it looks like it's on the back-end of a bender (all hungover and can't see straight), but it keeps ringing up at 1.00. Therefore I'm going to keep using it until it shows some signs, and will likely miss it when it finally "blinks out".
It's also vaping perfectly well. So well, in fact, that I had no idea which tank it was in. It is completely indistinguishable from my other CLR coils, vape-wise.
When I finally came across it last night, I recognized it immediately (tough to miss). I don't know how much longer it can possibly last, but it's simply another notch in the, "These coils are absolutely amazing!" lipstick case.
For your visual entertainment I now give you The Coil That Shouldn't Be Working (no-way, no-how!). Who knew!
CLRs FTW. Best coil ever? They just might be prezactly that.
View attachment 651839
View attachment 651841
I mangled my very first coil.....and I mean mangled it trying to replace a wick. Tried desperately to straighten it, cater to it, talk to it, until I cursed at it!
see. it doesn't have to be purdy to work. I could have told you that. My first ones looked a lot worse than that(well, kinda) and for grins I plugged them in anyway, wicked them up and vaped for a while. Did not really notice if they did or did not last as long as the purdier ones... Once the cover is on..........nobody sees it anyway.....Just a little Egg Roll plug here.
This is a coil that I overfilled with cotton, about three wicks ago. In attempting to remove the cotton I disfigured to an absurd degree, literally almost lifting it completely out of its little nest.
For S&Gs, I decided to see if I could jam it back down, squeeze it some, and straighten it with a mandrel. I fully expected that it would my first one that I had to throw into my "re-coil" bag. So far (knock-knock), I was wrong.
I took these pics last night, as I was re-wicking it again (either the 3rd or 4th time since ripping it to shreds). You can see that it looks like it's on the back-end of a bender (all hungover and can't see straight), but it keeps ringing up at 1.00. Therefore I'm going to keep using it until it shows some signs, and will likely miss it when it finally "blinks out".
It's also vaping perfectly well. So well, in fact, that I had no idea which tank it was in. It is completely indistinguishable from my other CLR coils, vape-wise.
When I finally came across it last night, I recognized it immediately (tough to miss). I don't know how much longer it can possibly last, but it's simply another notch in the, "These coils are absolutely amazing!" lipstick case.
For your visual entertainment I now give you The Coil That Shouldn't Be Working (no-way, no-how!). Who knew!
CLRs FTW. Best coil ever? They just might be prezactly that.
View attachment 651839
View attachment 651841
OMG, I was cursing my head off. I didn't realize THAT's what had worked!!!
GOOD to know.
see. it doesn't have to be purdy to work. I could have told you that. My first ones looked a lot worse than that(well, kinda) and for grins I plugged them in anyway, wicked them up and vaped for a while. Did not really notice if they did or did not last as long as the purdier ones... Once the cover is on..........nobody sees it anyway.....
"Eggslicely!" (< more Katspeak, since she deserves the credit for talking me into using these things)
Ladies first !All I can say is....... take a number and stand in line when this lil cutie comes out in a nano.
No shoves, and no buts. Back behind DPL and I, k?
Thinking they may eventually come out with a nano like they did with the hcigarvt75.
Use my black nano all the time the battery cover screws in with no problem but heard others have had problems with threaded battery cap, it always comes to the casino and the finish has held up very nice plus a reliable evolv Dna board.
Had mine apart out of curiosity as its basically screwed together.
Bought more nano's at the time to stash with extra frame ,battery cover and the larger vt battery cover .
Yep. It's JUST the red ones that have issues with the battery caps. All other colors APPEAR to be fine. I have no idea why that would be the case, but it is.
My red one has worked itself out now. I always change the batteries (USB charging bites wad), so time healed all wounds, so to speak.
Oh! One last note before I get my fat 
to work. The CLR's I've been re-wicking have been in play now for exactly 223 days. All coils are still going strong, and I re-wick weekly.
Again, amazing coils. I've never seen anything like them.
to work. The CLR's I've been re-wicking have been in play now for exactly 223 days. All coils are still going strong, and I re-wick weekly. Again, amazing coils. I've never seen anything like them.
- Status
Similar threads
- Locked
