My guess is that that's "wow wow wow wow wow wow"...... times 2.
^^^^^^
eGo ONE tank series – CLR coil
- Thread starter pufZeppelin
- Start date
- th_trl_thread_readers 0
- Status
^^^^^^
For the Tron-S fans... 2.00 each... plus HG's shipping...
Stick to the item and with enough Quantity as DPLongo22 says it can work out...
https://www.heavengifts.com/product/Joyetech-TRON-S-Atomizer-kit-4ml.html
Stick to the item and with enough Quantity as DPLongo22 says it can work out...
https://www.heavengifts.com/product/Joyetech-TRON-S-Atomizer-kit-4ml.html
For the Tron-S fans... 2.00 each... plus HG's shipping...
Stick to the item and with enough Quantity as DPLongo22 says it can work out...
https://www.heavengifts.com/product/Joyetech-TRON-S-Atomizer-kit-4ml.html
(x2) 
I like the looks of them Tron S tanks. How's the airflow on them?
They're good - almost the same as the Eggies. The only difference is that the range is slightly different, with not quite as high on the high end, and maybe a tad lower on the low end.
How do you set your AFC now, E? If it's not all the way open, you won't notice any difference at all.
wide open on the mini and the 4ml, slightly prefer the 4ml version.
after a few days/almost a week with these eggrolls, they seem to vape pretty much the same as my kayfun/Russian 91 atties do, except they are a lot easier and less messy to maintain.
They're magnificient -- a high-quality, no-hassle vape for a very reasonable cost.
IMO, the air flow control on the Tron-S is one of, if not the, smoothest controls I've ever experienced (not that I've tried zillions, though). Perfect tension. Always easy to move/adjust - whether on or off the mod - and it stays there.
Only small downside is that I end up blowing water back in my own face when I'm washing it out.
So if you're the type to blow into the mouthpiece before taking a draw...
Thanks for that tip !IMO, the air flow control on the Tron-S is one of, if not the, smoothest controls I've ever experienced (not that I've tried zillions, though). Perfect tension. Always easy to move/adjust - whether on or off the mod - and it stays there.
Only small downside is that I end up blowing water back in my own face when I'm washing it out.
They're very close but the Tron MAY be a bit light for you. I can't be sure though (I like them both, with a slight preference to the Eggrolls).
I like the 4s too, but I admit to not having tried the 2ml yet (I still have two in the pile).
Agreed (all points).
Agreed! All points.
You guys KNOW I agree.....
Beloverdz~
Beloverdz~
And my buying binge continues! With my iStick 60 almost delivered I decided to order some battery covers for it so I can be matchy matchy with my Cyan and white V1s
.
I think the 60 will be my Sunday go ta meetin rig.
I think the 60 will be my Sunday go ta meetin rig.
Last edited:
I was perfectly happy vaping my PT2's for about 2 years, until "the deeming" raised it's ugly head. Figured I'd better find something else to put into my vape stash and discovered the STM. WOW! Much better flavor but still with a convenient replaceable, rebuildable coil.
I tried a couple of KF clones (way too much fiddling), and the Wine (very good flavor but there's that fiddling thing again). I really liked my STM's and thought I'd be vaping them til I died. I think I have 2 dozen tanks (counting bell caps), SEVERAL o-ring kits, at least 15 glass replacements and 50+ RBA's.
I received my eggrolls last week and initially thought they were on par with the STM. The more I vaped them, the more I realized (didn't take long) I was wrong. These are MUCH better!
With the Tron-S's that I just ordered, I'm just under that 2 dozen mark. If they would have had black or grey in stock, I'd be well over it.
Thanks to all of you for convincing me to try them.
Now I need to find (make?) some converts to give some of my STM tanks to. They're NOT getting ANY of my eggrolls. (VERY special cases excepted.)
I tried a couple of KF clones (way too much fiddling), and the Wine (very good flavor but there's that fiddling thing again). I really liked my STM's and thought I'd be vaping them til I died. I think I have 2 dozen tanks (counting bell caps), SEVERAL o-ring kits, at least 15 glass replacements and 50+ RBA's.
I received my eggrolls last week and initially thought they were on par with the STM. The more I vaped them, the more I realized (didn't take long) I was wrong. These are MUCH better!
With the Tron-S's that I just ordered, I'm just under that 2 dozen mark. If they would have had black or grey in stock, I'd be well over it.
Thanks to all of you for convincing me to try them.
Now I need to find (make?) some converts to give some of my STM tanks to. They're NOT getting ANY of my eggrolls. (VERY special cases excepted.
)
I hear Ya. I've 2 STM and they're fine tanks but my V1s have sent them into retirement. To me the STM is too fiddly. I can deal with screws if necessary but I much prefer the simplicity of the CLR.I was perfectly happy vaping my PT2's for about 2 years, until "the deeming" raised it's ugly head. Figured I'd better find something else to put into my vape stash and discovered the STM. WOW! Much better flavor but still with a convenient replaceable, rebuildable coil.
I tried a couple of KF clones (way too much fiddling), and the Wine (very good flavor but there's that fiddling thing again). I really liked my STM's and thought I'd be vaping them til I died. I think I have 2 dozen tanks (counting bell caps), SEVERAL o-ring kits, at least 15 glass replacements and 50+ RBA's.
I received my eggrolls last week and initially thought they were on par with the STM. The more I vaped them, the more I realized (didn't take long) I was wrong. These are MUCH better!
With the Tron-S's that I just ordered, I'm just under that 2 dozen mark. If they would have had black or grey in stock, I'd be well over it.
Thanks to all of you for convincing me to try them.
Now I need to find (make?) some converts to give some of my STM tanks to. They're NOT getting ANY of my eggrolls. (VERY special cases excepted.
I was perfectly happy vaping my PT2's for about 2 years, until "the deeming" raised it's ugly head. Figured I'd better find something else to put into my vape stash and discovered the STM. WOW! Much better flavor but still with a convenient replaceable, rebuildable coil.
I tried a couple of KF clones (way too much fiddling), and the Wine (very good flavor but there's that fiddling thing again). I really liked my STM's and thought I'd be vaping them til I died. I think I have 2 dozen tanks (counting bell caps), SEVERAL o-ring kits, at least 15 glass replacements and 50+ RBA's.
I received my eggrolls last week and initially thought they were on par with the STM. The more I vaped them, the more I realized (didn't take long) I was wrong. These are MUCH better!
With the Tron-S's that I just ordered, I'm just under that 2 dozen mark. If they would have had black or grey in stock, I'd be well over it.
Thanks to all of you for convincing me to try them.
Now I need to find (make?) some converts to give some of my STM tanks to. They're NOT getting ANY of my eggrolls. (VERY special cases excepted.
I bought several STMs, and thought they'd be my vapocalypse atty. I learned how to build with them, but I hate the short screws in the RBA. The STM works best with lower pg liquids, however, and I prefer high pg. The Egg Roll works like a dream with my 70% PG juices, and the STMs are no longer in the rotation. If I ever decide I want to vape high VG, I'll have the STMs, but I don't think I'll ever like them as much as the Egg Roll!
A freaking $10 blister atty, no less.. Amazing...
I wish we knew someone with influence at JT, because if we could get grommets for these things, well, the possibilities are staggering.
...or I'd be happy if they would just keep manufacturing and selling the tanks and coils.
I guess I could rent a storage locker...
- Status
Similar threads
- Locked
