eGo ONE tank series – CLR coil

[gandymarsh]

Mike, I only use one. It's one I bought from the Classies. It was used when I bought it.

I have read that some other people have had this happen. I have rewicked the CLR coil with rayon a few times but never built a coil for it. It was new when I put it in.

It only happens when the juice level drops to about 1/4. I don't have a clue why. It's not being used now since I bought the Trons.

 

[pufZeppelin]

for the most part, I think all the eGo ONE tanks perform very similar - IMO
the Tron being the most restricted air flow, the v2 having SLIGHTLY more air-flow than the rest (slightly) -IMO


the saturation/condensation build up UNDER the coil (inside the base) I believe is due to the fine design of the tank...
(the reason the Tron doesn't show leak/seepage is they have ALMOST a closed air flow opening)
the seepage is also DUE TO a loss of vacuum inside tank because of air/fluid ratio (more air, less fluid promotes high PRESSURE to PUSH out the eJuice thru the wick)

the reason I complain about the Tron, is the closed/hidden air flow blows the VAPE right into your face !

 

[Foggy Road]

I too occasionally get a little leak at the V1 airflow. I also get a LOT OF condensation. I'm convinced that condensation is more the culprit than wick seepage. Once enuf builds up in the chimney ain't no place for it to go but back down thru the coil to the base. Just decided last night to start cleaning the chimney/drip tip halfway thru a tankfull,no big deal. Certainly not enuf to disenchant me with these near perfect tanks.
Of coarse if I REALLY needed ABSOLUTELY leakfree I could always use my Cubis that heats the excess juice to scalding then spits it straight down my throat instead of draining out the bottom.

 

[Foggy Road]

Oh NOOO! Just found out we've lost Mary Tyler Moore!

 

[pufZeppelin]

when I detect some seepage out the airhole, I just turn it to the side
blow thru it and what little 'dampness' is in there, blows out the other side - presto, 3 seconds done...

 

[Katdarling]

@Katdarling, not the V2. I guess you could say V1.These came first. I have the ones that Look like this.

I have 2 black Trons and 2 red ones.

Thanks, gandy. I'm mentally recalling PufferZ pics again now. I sort of passed over the V1 because of the window design.

Mike, I only use one. It's one I bought from the Classies. It was used when I bought it.

I have read that some other people have had this happen. I have rewicked the CLR coil with rayon a few times but never built a coil for it. It was new when I put it in.

It only happens when the juice level drops to about 1/4. I don't have a clue why. It's not being used now since I bought the Trons.

PufZ is perfectly accurate on the vacuum loss, and the air to fluid ratio. I was always taught to keep tanks rather full. (Do I always do that? Umm, no. )

(Thanks for the balloons!)

​

I too occasionally get a little leak at the V1 airflow. I also get a LOT OF condensation. I'm convinced that condensation is more the culprit than wick seepage. Once enuf builds up in the chimney ain't no place for it to go but back down thru the coil to the base. Just decided last night to start cleaning the chimney/drip tip halfway thru a tankfull,no big deal. Certainly not enuf to disenchant me with these near perfect tanks.
Of coarse if I REALLY needed ABSOLUTELY leakfree I could always use my Cubis that heats the excess juice to scalding then spits it straight down my throat instead of draining out the bottom.

Great idea, FR! Also something I do (occasionally..... damm I'm lazy!).

Your description of the Cubis adventures has me ROFL!!!

 

[IMRs]

Thanks, gandy. I'm mentally recalling PufferZ pics again now. I sort of passed over the V1 because of the window design.



PufZ is perfectly accurate on the vacuum loss, and the air to fluid ratio. I was always taught to keep tanks rather full. (Do I always do that? Umm, no. )

(Thanks for the balloons!)

​

Great idea, FR! Also something I do (occasionally..... damm I'm lazy!).

Your description of the Cubis adventures has me ROFL!!!

You might want to pick up some v1's just to use the bases. It makes life so much easier.

 

[Katdarling]

Hmmm...... maybe so, IMRs. The air flow control isn't TOO bad, but I do have to take the tank off to change it. Luckily, the lazy vaper doesn't really need to change it tho.

 

[oplholik]

Where is a good place to get the v1's. My only niggle on these ego one tanks, is that the air flow is hidden.

 

[motordude]

Thanks peeps!
I'm gonna order the v2 with some clrs tomorrow!
I will try it out first, then maybe a Tron later on. They do look nice!

 

[Nanny22]

Where is a good place to get the v1's. My only niggle on these ego one tanks, is that the air flow is hidden.

You can get the Ego One version 1 at Litecig. Here's a link, the site is less than ideal, as it does not show a photo sometimes until you click on the individual item.
Electronic Cigarette Supplies & Electronic Cigarette Refills for Name-Brand Electronic Cigarettes! E-Cigs from LiteCigUSA

They come in 1.8, 2.5 and 4 ML sizes. Some are sold out.

Here are the REBUILDABLE "CLR" coils. Remember to get 1.0 Ohms unless you like a very airy draw. Joyetech eGo ONE CLR Replacement Atomizer heads

AND ... rewick with rayon when you do the first wick change!

 

[gandymarsh]

Where is a good place to get the v1's. My only niggle on these ego one tanks, is that the air flow is hidden.

They're getting hard to find. Maybe not made anymore?

I just looked on Vapecrawler. They seem to be sold out everywhere.

Vapeshop.com has the Mega V2 for $11 and the smaller 2ml V2 for $10.

Joyetech eGo ONE Mega V2 Tank

Joyetech eGo ONE V2 Tank

 

[Nanny22]

Another pro-tip on these tanks (and any other purchase, for that matter) GO SMALL at first and see if it is everything you hoped. You can order more later, if you love them. They work well for ME with the pg/vg percentage I use and with the flavors I personally like. As with anything YMMV!

 

[IMRs]

Where is a good place to get the v1's. My only niggle on these ego one tanks, is that the air flow is hidden.

Seems like it's getting harder to find the v1's.

 

[gandymarsh]

You can get the Ego One version 1 at Litecig. Here's a link, the site is less than ideal, as it does not show a photo sometimes until you click on the individual item.
Electronic Cigarette Supplies & Electronic Cigarette Refills for Name-Brand Electronic Cigarettes! E-Cigs from LiteCigUSA

They come in 1.8, 2.5 and 4 ML sizes. Some are sold out.

Here are the REBUILDABLE "CLR" coils. Remember to get 1.0 Ohms unless you like a very airy draw. Joyetech eGo ONE CLR Replacement Atomizer heads

AND ... rewick with rayon when you do the first wick change!

Thanks for that Nanny.

That's the place I bought 2 of my Trons from. I was trying to remember but couldn't.

 

[oplholik]

You can get the Ego One version 1 at Litecig. Here's a link, the site is less than ideal, as it does not show a photo sometimes until you click on the individual item.
Electronic Cigarette Supplies & Electronic Cigarette Refills for Name-Brand Electronic Cigarettes! E-Cigs from LiteCigUSA

They come in 1.8, 2.5 and 4 ML sizes. Some are sold out.

Here are the REBUILDABLE "CLR" coils. Remember to get 1.0 Ohms unless you like a very airy draw. Joyetech eGo ONE CLR Replacement Atomizer heads

AND ... rewick with rayon when you do the first wick change!

Thanks Nanny. I checked em out and they are out of the megas(4ml), but might pick up a couple of the 2.5ml tho. Oops, those are o/s also.

 

[Nanny22]

No problem @gandymarsh - there are a few other places, but I CAN"T REMEMBER THEM, EITHER! I figure between all of us, we will get one good solid answer here in a little bit! GO TEAM!

 

[IMRs]

Where is a good place to get the v1's. My only niggle on these ego one tanks, is that the air flow is hidden.

I found some, but they're double the price that we were originally paying.
Joye eGo ONE Mega VT Atomizer
Joye eGo ONE Mega VT Atomizer

 

[Nanny22]

Thanks Nanny. I checked em out and they are out of the megas(4ml), but might pick up a couple of the 2.5ml tho. Oops, those are o/s also.

AW HECK. Give us a little bit. Somebody's got them here and there. Vapecrawler check up coming ......

 

[gandymarsh]

I found some, but they're double the price that we were originally paying.
Joye eGo ONE Mega VT Atomizer
Joye eGo ONE Mega VT Atomizer

I've got 2 of those. They are the same as the V1 but they come with TC coils. Not a problem though because the CLRs work with them.

Edit; They seem to be sold out there too.