Think the little Pico's are growing on me. I was so sure I wouldn't like them....LOL. I don't do TC either but might just try it sometime.....maybe......for puf.
eGo ONE tank series – CLR coil
- Thread starter pufZeppelin
- Start date
- th_trl_thread_readers 0
- Status
This^^ I agree it's why there are a lot not liking the tank (and putting top cap on upside down by mistake). I have just fitted a 16mm (ID) 1mm (CS) 18mm (OD) to the airflow and it is now working perfectly. No leaks and no annoying, spinning airflow ring!
Can't beat a pico on a pico for cuteness
View attachment 650507
That is great news and once again Many Thanks , tried a spare o-ring had laying around it fit in groove nice
when installing the ring over it would move out of place upwards as it was probably 1.5 cs.
Ok that is great now can get both from same person on the bay .
They do look very nice on the pico .
Thank You so much .
Order placed on the bay for 2 different o-rig sizes for pico-s from same seller who combined shipping when order was placed in cart.
Thanks again Kates.
Thanks again Kates.
This^^ I agree it's why there are a lot not liking the tank (and putting top cap on upside down by mistake). I have just fitted a 16mm (ID) 1mm (CS) 18mm (OD) to the airflow and it is now working perfectly. No leaks and no annoying, spinning airflow ring!
Can't beat a pico on a pico for cuteness
View attachment 650507
I've not really spent much time researching the Pico-s. kates, is yours (in this pic) the older style? I notice that the tank is clear, not yellow. And if so, is yours the one that does NOT take CLRs?
TIA, hon!
Oh! I didn't know there were ones that don't take the CLR coils. I'm not interested in that at all. So the yellow doesn't take CLRs?
Sent from my iPhone using Tapatalk
As I said, I'm no Pico-s expert, but I believe it's the other way around, VL. I believe the yellow one DOES take the CLRs.
@Dieseler ?
No, it''s the pico-s with clr adapter but I changed the tank. Think it came with a clear tank too - but I also bought a set of spares from FT. The tank has the itty bitty 4 fill holes (the yellow tank has much bigger ones) but I nearly always use a needle tipped bottle so am OK with it.
The pico and pico-s accept clr but it must come with the clr adapter kit which some do not.
Example - No clr adapter included , but if you have the clr adapter from a stash it will work with this pico.
$8.67 Pico Styled RTA Rebuildable Tank Atomizer - 3ml / 316 stainless steel + acrylic / 22mm diameter at FastTech - Worldwide Free Shipping
This one comes with clr adapter
$17.51 Authentic Rcomen Pico-s RTA Rebuildable Tank Atomizer - 3ml / 316 stainles steel + PEI at FastTech - Worldwide Free Shipping
Last edited:
This is the one you want comes with yellow and clear tank and clr adapter kit.
$17.51 Authentic Rcomen Pico-s RTA Rebuildable Tank Atomizer - 3ml / 316 stainles steel + PEI at FastTech - Worldwide Free Shipping
Yes, the Rcomen is the one I have.
These are the spares I got
$7.48 Replacement Acrylic + PEI Bell Cap for Pico RTA Atomizer (6 Pieces) 6-pack - ships one of each color at FastTech - Worldwide Free Shipping
These are the spares I got
$7.48 Replacement Acrylic + PEI Bell Cap for Pico RTA Atomizer (6 Pieces) 6-pack - ships one of each color at FastTech - Worldwide Free Shipping
Meant to order the spare tanks when placed order for clr's but forgot but thats ok will order more pico-s next week
I also notice with pico-s they made mistake and show old style plastic type tank with small fill holes but they actually come with the larger fill holes in those tanks.Here is mine from last order not used yet notice
the larger fill holes on top of tank and link ordered from
$17.51 Authentic Rcomen Pico-s RTA Rebuildable Tank Atomizer - 3ml / 316 stainles steel + PEI at FastTech - Worldwide Free Shipping
the larger fill holes on top of tank and link ordered from
$17.51 Authentic Rcomen Pico-s RTA Rebuildable Tank Atomizer - 3ml / 316 stainles steel + PEI at FastTech - Worldwide Free Shipping
Hope not confusing anyone i know it can be a lot to take in at least it was for me at first in getting it up and running properly without any included instructions but in hindsight its actually pretty easy once i had help .
So if anyone orders one and needs help im sure some of us will be of assistance.
No question is dumb question so ask away please.
So if anyone orders one and needs help im sure some of us will be of assistance.
No question is dumb question so ask away please.
Yours appears to be clear, kates. The ones in the link for replacement caps shows colors and what appears to be a sort of frosted "clear".
So, I'm guessing that the bit on the far left is the CLR adapter?
kates and Dieseler, thank you both so much for all the heads up, advice, and time. Appreciated, yes it is.
So, I'm guessing that the bit on the far left is the CLR adapter?
Now...I'm really cornfused!!!
That "far left CLR adapter" is not shown in the other picture (of parts) on FT... (and the site's description does not mention a "CLR adapter")...
[Only kicking a dead horse because I'd have NO interest in the pico-s if I couldn't use CLR's with it.]
..
Now...I'm really cornfused!!!
That "far left CLR adapter" is not shown in the other picture (of parts) on FT... (and the site's description does not mention a "CLR adapter")...
[Only kicking a dead horse because I'd have NO interest in the pico-s if I couldn't use CLR's with it.]
..
I'm confused too. But I'm going to get one. So we're not beating that poor horse![emoji4]
Sent from my iPhone using Tapatalk
I'm terribly sorry, and certainly had no intention of confusing anyone. I've never seen the tank (in person), and paid just a dab of attention to it over the last several conversations about it.
The only question I had was about the CLR adapter and what it looked like, as yes, it is definitely not listed in the FT description of the yellow tank (the newer tank, the more expensive tank -- you know what I mean).
I'll leave the answers to @Dieseler and @kates.
The only question I had was about the CLR adapter and what it looked like, as yes, it is definitely not listed in the FT description of the yellow tank (the newer tank, the more expensive tank -- you know what I mean).
I'll leave the answers to @Dieseler and @kates.
I think this post answers it perfectly.
And so it would seem to me that I did in fact correctly ID the CLR adapter, as it's only shown in the pic of the Authentic Rcomen Pico-s, not the Pico Styled one.
And so it would seem to me that I did in fact correctly ID the CLR adapter, as it's only shown in the pic of the Authentic Rcomen Pico-s, not the Pico Styled one.
Now...I'm really cornfused!!!
That "far left CLR adapter" is not shown in the other picture (of parts) on FT... (and the site's description does not mention a "CLR adapter")...
[Only kicking a dead horse because I'd have NO interest in the pico-s if I couldn't use CLR's with it.]
..
The pico-s IS the one that takes CLR coils.
Only focus on this one IF you want to use the CLR coils.
This is the same one that @Dieseler and @Katdarling have linked with the pics.
$17.51 Authentic Rcomen Pico-s RTA Rebuildable Tank Atomizer - 3ml / 316 stainles steel + PEI at FastTech - Worldwide Free Shipping
Totally agree Kat.....I understood what you meant and typed.......I think this post answers it perfectly.
And so it would seem to me that I did in fact correctly ID the CLR adapter, as it's only shown in the pic of the Authentic Rcomen Pico-s, not the Pico Styled one.
- Status
Similar threads
- Locked
