eGo ONE tank series – CLR coil

[David Wolf]

Heads-up Ego One/CLR fans

Health Cabin Sale 10% off
Use code - thanks8

eVic VTC Mini + eGo ONE Mega VT + 20 CLR's

1 x $19.90 joyetech evic vtc mini 60w full kit with temperature control (Black, White, Cyan)

4 x $2.50 5pc joyetech ego one clr-ti vt atomizer head

$29.90 -$2.99(thanks8) = $26.91 + Free Shipping

hth

Does anyone know if the CLR-TI coils have the same pin and head construction as regular CLR coils, or are they more open thus not as tight a draw?

 

[fgarvin]

Does anyone know if the CLR-TI coils have the same pin and head construction as regular CLR coils, or are they more open thus not as tight a draw?

• the CLR Ti .5 has a gold plated larger 3.5mm air hole
• the CLR Kanthal .5 has a silver plated 3.5mm air hole
• the CLR Kanthal 1.0 has a silver plated 1.8mm air hole

View attachment 644239

so you can strip all three down TOTALLY, throw all parts in a box
then reach in and pull out ANY PARTS to build a CLR coil (all parts inner-change)

​

CLR-TI are the open "airy" version.

 

[backitdown]

I'm not sure but I would think all .5 ohm coils, no matter the wire used, have the larger hole in the pin

 

[pufZeppelin]

another sad day from the TV world:

a cool quote from Adam -

R.I.P.
Caped Crusader​

 

[David Wolf]

CLR-TI are the open "airy" version.

I'm not sure but I would think all .5 ohm coils, no matter the wire used, have the larger hole in the pin

Ok thanks. Still not a bad buy for MTL CLR parts (body and silicone sleeve) I guess if you use your existing CLR coil pins.

 

[ChelsB]

Was it just the ones I got, or are all the Ti CLR coils have the coil welded on?

 

[Shawn Hoefer]

Was it just the ones I got, or are all the Ti CLR coils have the coil welded on?

None of the CLRs are welded.

Sent from my SAMSUNG-SM-N910A using Tapatalk

 

[ChelsB]

None of the CLRs are welded.

Sent from my SAMSUNG-SM-N910A using Tapatalk

When I removed the stock coil a piece of the leg was suck to the side which is why I assumed it was welded....

 

[Shawn Hoefer]

When I removed the stock coil a piece of the leg was suck to the side which is why I assumed it was welded....

I'm quite sure that was just sticky, not welded... did the wire break? Had the coil been used?

Sent from my SAMSUNG-SM-N910A using Tapatalk

 

[ChelsB]

I'm quite sure that was just sticky, not welded... did the wire break? Had the coil been used?

Sent from my SAMSUNG-SM-N910A using Tapatalk

Yes, the wire broke. No, coil wasn't used as it wouldn't register on the mod or ohm meter, which is why I tore it out and was surprised at how much I had to tug to get it out. I'll do some surgery on another one from the same box to see if it happens again

 

[Sugar_and_Spice]

None of the CLRs are welded.

Sent from my SAMSUNG-SM-N910A using Tapatalk

I got some of these coils also so its my first time using tc. I do know you can't dry burn these coils, but I noticed the pins at the bottom are gold(ish) in color. Should I assume that the pins have another sort of metal,(other than the reg ones) in order to be able to fire these?

 

[Shawn Hoefer]

I got some of these coils also so its my first time using tc. I do know you can't dry burn these coils, but I noticed the pins at the bottom are gold(ish) in color. Should I assume that the pins have another sort of metal,(other than the reg ones) in order to be able to fire these?

No. The pins are gold plated to improve conductivity, but other pins will work.

Sent from my SAMSUNG-SM-N910A using Tapatalk

 

[Sugar_and_Spice]

No. The pins are gold plated to improve conductivity, but other pins will work.

Sent from my SAMSUNG-SM-N910A using Tapatalk

Thanks Shawn.

 

[David Wolf]

simply YES
but going a bit deeper:

• the CLR Ti .5 has a gold plated larger 3.5mm air hole
• the CLR Kanthal .5 has a silver plated 3.5mm air hole
• the CLR Kanthal 1.0 has a silver plated 1.8mm air hole

View attachment 644239

so you can strip all three down TOTALLY, throw all parts in a box
then reach in and pull out ANY PARTS to build a CLR coil (all parts inner-change)

​

Great graphic, thanks. The larger air holes wouldn't work for me, I prefer a tighter draw for my MTL.

 

[David Wolf]

Well look at YOU, getting all techy-talk and what-not.

ahaha "the little grommety things" did make me smile. I figured out of course KatieD meant Silicone Pin Sleeve p/n 4986653. jk about the part number.

 

[gerrymi]

This is WAY OVER the number of Watts I'd ever use...(for a person that has never gone over 20Watts)...

(I know...just because it has 120Watts doesn't mean I have to use 120Watts.)

But...we're only talkin' $19...

Kangertech KBOX 120 TC Box Mod (US Vendor) $19.00

They currently have 2 colorways in stock: black and red. Shipping is FREE on US orders over $49.

Kangertech KBOX 120w TC Box Mod


..

 

[DPLongo22]

Silicone Pin Sleeve p/n 4986653. jk about the part number.

You know dayum well that I was about to begin a search.

 

[Shawn Hoefer]

This is WAY OVER the number of Watts I'd ever use...(for a person that has never gone over 20Watts)...

(I know...just because it has 120Watts doesn't mean I have to use 120Watts.)

But...we're only talkin' $19...

Kangertech KBOX 120 TC Box Mod (US Vendor) $19.00

They currently have 2 colorways in stock: black and red. Shipping is FREE on US orders over $49.

Kangertech KBOX 120w TC Box Mod


..

It's a decent enough box. Gots me one. The finish is questionable, though...

Sent from my SAMSUNG-SM-N910A using Tapatalk

 

[gerrymi]

It's a decent enough box. Gots me one. The finish is questionable, though...

Well Shawn...I've never been able to upset myself over my Mods' chipped/scratched/dinged/worn finishes...

When they're sitting there...next to my laptop/couch...I don't really look at them...

And...when I'm actually vaping with them...I don't really look at them...

[But...as "they" say...YMMV...]

..

 

[Shawn Hoefer]

Well Shawn...I've never been able to upset myself over my Mods' chipped/scratched/dinged/worn finishes...

When they're sitting there...next to my laptop/couch...I don't really look at them...

And...when I'm actually vaping with them...I don't really look at them...

[But...as "they" say...YMMV...]

..

I'm afraid I get a bit wound when I see dings and nicks. This one, however, ince a chip started, I was able to remove all the paint with my thumbnail...

Sent from my SAMSUNG-SM-N910A using Tapatalk