eGo-T Charger and Battery issues

[Kargin]

Had a quick question for you regarding the eGo-T batteries.
I ran one completely dry last night, button flashed letting me know its dead, but nothing is happening when I plug it into the charger, whether its plugged into the wall or a powered USB port. The light on the charger is staying green. The charger is the standard USB charger that comes with the kit, 4.2v 420 mA output.

My other battery is charged thankfully, but I don't have any idea if it is the battery or the charger that is the problem, so I have not plugged my good battery into the charger to see.

Any suggestions or assistance would be awesome.

 

[scalewiz]

Try your other battery on the charger. When screwed on, the battery light should flash several times, and then the charger light should go red until the battery is charged. If it does not work, it could be the charger. Take a cotton swab and clean the terminals down inside the battery, and also on the charger. Sometimes liquid and corrosion may prevent good contact between the battery and charger.

If neither battery charges, then the charger is probably defective.

 

[Kargin]

I tried the other battery and it seems fine. When i screw in the problem battery to the charger, it screws in tight but it seems to "wiggle" within the charger.

 

[scalewiz]

Probably your battery. Look to see where it's wiggling. If it is loose on the battery itself, you should contact the seller and arrange a replacement battery. Since it's just one battery that seems to be the culprit, this is most likely the situation.