Ego T help needed

[Pamdane]

I have 2 eGo's now. I thought one was fried and ordered a new battery. Found an eGo T 1000mA cheap. Its on its way now.

So, I know I can use all existing eGo stuff I have on it, and that my eGo charger will work, but what do I need to use it as a tank system? I know the old atty/carts and carto are not in the picture.
I cant figure the filler from the cover needs. Are there choices? How much of what should I get, so as to be prepared when I am ready?

Can it still do dual coils? They are my best find so far....
I hate the carts, and pretty much either drip or use DCC now....

I need a reply that is equivalent to "The eGo T for dummies" kind of reply, sorry.

 

[juicejunky]

The egoT battery is just like a regular ego battery except it has the 5 button press shut off. You need ego-T atomizers to use the tanks.

There are I think 4 types now, Type A (old ones) LR and normal, Type B (newer ones) LR and normal. Check our GoodProphets they have good prices, lots of colors, and sometimes good sales. You also need the appropriate tanks, either A or B to go with the attys. Cignot also carries the latest.

I gave up on them because of the leaks, clogging, etc., but I used the egoT batteries with 306LR attys for dripping all the time. The 1000 mah is long enough to last most of the day with LR attys. ALl day with regular attys. They should work just like a regular ego battery with duals.

 

[Iffy]

If you have eGo batts, then do yourself a huge favor and order THESE!

For more info, go HERE and HERE.

 

[Winkos]

If you have eGo batts, then do yourself a huge favor and order THESE!

For more info, go HERE and HERE.

I haven't used cartos (except the horrible mall ones with a cheapo kit I bought when I first vaped) and decided to try these. I bought 4, and hope they are great. Glad you liked them. I was happy the shipping was reasonable.

 

[Pamdane]

Ok, but how do they assemble? I have almost 30 DCC(dual coil cartos) already. I LOVE them!

But I understood that to use the eGo T as it is meant to be used required 2 attachments to the battery. Some sort of reservoir and some type of cover to go over it?

I saw a number of different types of reservoirs. All were plastic, and I love to vape cinnamon(erodes plastic), so what to use? What is type A vs type B?
thanks!

 

[RIMP]

Type A is cone shaped and holds approx 1ml, type B is cylinder shaped and holds approx 2ml liquid
RIMP

 

[ancient puffer]

The two pieces you need are the atomizer and the tank. The atomizer is cone shaped (type A) or cylinder shaped (type B) and attaches directly to the battery end. The tank is then filled and inserted into the atomizer. Easier to understand when you're holding them in your hand

 

[Pamdane]

Got it! Thanks....

 

[washvap]

If you want to try tanks than I suggest that you start out with ego-t type B atties and tanks. Since it's a big improvement over the older model obviously and holds more juice too.

 

[Haadkoe]

If you want to try tanks than I suggest that you start out with ego-t type B atties and tanks. Since it's a big improvement over the older model obviously and holds more juice too.

I have both the eGo-T type B (SR and LR) and the 501-T (SR and LR) and have grown to hate the ego tanks and atties. I find that the eGo tanks either leak and empty themselves into the atty, or repeatedly draw e-liquid into the air chambers and thus into your mouth. That, and the tips on the mouthpieces seem to fall out randomly, rendering the tank useless.

I have none of these problems with my 510-T tanks and atties, so I use them pretty much exclusively on my eGo batteries. Only downside is that they are significantly smaller than the eGo tanks, so I've got to carry a bunch of spare tanks with me. On the bright side, I get to switch up flavors much more frequently.