ego xl cone atomizer

[wood]

any one have any experience with these?
i cant seem to get it to work , i put 30 drops in , i get 2 - 3 puffs then nothing just dry burntness , now i heard these are really decent and will last along time and stay moist but two puffs and dry unless i leave it upright for 15 min i get another puff

 

[DemonCleaner]

having the same kind of problem with my cylinder ego atty...i stopped using it for that reason. So I'll keep an eye on this thread if anybody has a solution.

 

[wood]

thanks try cutting the stock filler into thirds fill the cart then stick one third in , thats kinda working so far , its only been 15 minutes but thats the longest its gone no leaks yet

 

[Switched]

What type of liquid are you folks using in them. I was apprehensive about these when they were introduced but got a couple from Jack and they rock, with the original batting etc... They do not vape like an eGo but more like an 801, but vape fine. My 801s on the other hand have the same problem mentioned here.

 

[Hendo123]

Hi

I cut the poly fill, lengthwise, about 1/4. Then I put the 3/4 into the cartridge.

I am able to take 50 or so puffs before refilling.

 

[Happy Jack]

Hey wood!

I would recommend leaving the stock filler in them, and filling them with about 40 drops of standard PG-based e-liquid but, when vaping, take more forceful draws than what you are accustomed to on a standard atty (more like a cigar pull). The additional force helps the liquid wick from deep in the cart onto the atomizer bridge and provides me an incredible amount of vapour and throat hit and it lasts for quite some time!

Hope that helps!

Happy Thanksgiving and Happy Vaping!
Jack

 

[wood]

its working better but still not quite there , how are you filling yours

 

[Happy Jack]

its working better but still not quite there , how are you filling yours

I'm not sure if I'm understanding the question correctly, but I drip the liquid straight from the bottle into the filler, a drop at a time, allowing some time between drops for the liquid to settle into the filler a bit each time (and not create an air pocket underneath). I don't do anything special, really.

Not sure if that will help but hope it will!

Vape Happy!
Jack

 

[Switched]

Hi

I cut the poly fill, lengthwise, about 1/4. Then I put the 3/4 into the cartridge.

I am able to take 50 or so puffs before refilling.

Wow! Not sure how depleted it is after 50 hits but you should easily get at least twice that with a refill. 40 drops (44 fresh cart = too wet) at an average of 5-6 hits per drop = 200+ hits on a single charge. My carts are accepting between30-35 drops during top off and as low as 25-30 when it gets too greasy and requires a wash.

 

[wood]

so u just drop on the filer , iv been taking it right out , then putting 30 drops the sticking it back in , maybe thats the wrong way to fill it ?

 

[Happy Jack]

so u just drop on the filer , iv been taking it right out , then putting 30 drops the sticking it back in , maybe thats the wrong way to fill it ?

Yup. Just take a brand new, blank cartridge, drip your 40 drops into it and push it into the opening of the atty. Then vape with forceful drags. You should be golden!

Vape Happy!
Jack

 

[wood]

ill try it now , thanks jack ,

 

[wood]

wow i was skeptical but that really worked as far as filling , i didnt think it would take all the drops that way but it did with no problem now to test the vaping

 

[DemonCleaner]

so what you're saying is that if you suck it harder...It will work better....

wait for it....

.....

....

Thats what she said

 

[pcijohn]

I don't like these at all for the amount of fluid they hold they taste very flat and don't seem to last like they should I have tried with stock batting and fluval I am very unhappy with them put my 510 atty back on and strong hit and taste. I wonder why but have tried everything

 

[wood]

I don't like these at all for the amount of fluid they hold they taste very flat and don't seem to last like they should I have tried with stock batting and fluval I am very unhappy with them put my 510 atty back on and strong hit and taste. I wonder why but have tried everything

ya im not getting a very good experience either

 

[Switched]

There is a learning curve to these attys. For someone who has experience with1 801s the transition is pretty smooth, for those who are accustomed to the 510, the learning curve can be steep. Regardless, I believe in the beginning folks draw on an e-cig like they would a cigarette. Vaping is much more satisfying as well as vapour production with nice slow easy drags.

Notwithstanding, the eGo mega attys do not render the eGo Vape perse (as the cone is not in play), but they do deliver an 801 vape marvellously well.

http://www.e-cigarette-forum.com/fo.../113972-ego-mega-attys-carts.html#post1731392

 

[kushka]

I don't understand the problems people are having.

I have never used carts - only cartomizers for months and months.

Then last week I tried dripping - and liked it - only I only had 3 cheap 510 automatizes that I destroyed on my 5V. So, I ordered an ego atomizer and an ego drip tip from Good Prophets which came Saturday - and they sent me a free cart!

That atomizer is huge! makes my ego look like a giant cigar - but dripping was easy and great - did so all weekend.

This morning right before I headed off to work I tore open the cart package - did nothing special - just removed the condo on the end - quickly squirted e-juice directly onto the filler that was there until it overflowed, then dabbed it with a paper towel to soaked up the overflow - stuck it on the atomizer and been vapping on it ever since - which includes chain vapping during my 40 min commute.

No problems - no hassles - a lot of vapor - but not as much as dripping - but I attribute that to the small hole in the mouthpiece of the cart. Do all carts have such small holes? It seems cartomizers holes are about twice as big.

Anyway then I saw this thread and saw that people were having problems with these. To me it has been a hassle free introduction to carts, and I plan on ordering more carts and a couple of more ego atomizers today. I just wish they weren't so expensive almost twice the price of 510's - but they do look great! -and I hope they last - I will not try them on my 5v though - 5V are atty killers, I don't mind so much it killing the cheapo cartomizers I use, but a $13 atomizer I can not afford to risk.

 

[wood]

xl drip tip really?

 

[Switched]

Heaven Gifts has the proper drip tip for the tapered type A mega eGo atty. I haven't seen them elsewhere.