Eleaf GS Air Fan

Status
Not open for further replies.

Cheechako

Vaping Master
ECF Veteran
Verified Member
Feb 11, 2012
5,192
39,314
Arizona
Top of the morning to all my Tootle Puffing AirHead friends!! And welcome to the new folks!! Nice to meet you!
Hope everyone has a wonderful Thursday.
Grampy and I will be watching the twins today - give us strength to tag team two four year olds and Tootle Puff our way to 5:00!!!

Good Morning and you have my sympathies!
 

GranFumador

Ultra Member
ECF Veteran
Sep 12, 2013
1,607
17,647
Peoples' Bucolic Republic of Maine
Mornin' guys, and matinal salutations to Cheech's lexicographical tome. Now that I am merrily tootle puffing on three istick 30s, each with an Air or M on top it's time to fine tune the gear. The M tip is going to the dump. The Air tip is nearly as bad. I've never bought a tip before... just used what came on a collection on Protanks, Protank Minis, Unitanks, etc.

Please be my teachers. Not aesthetics...that's personal. Tell me about wood tips, acrylic tips, glass tips (that don't break when a chipmunk squints at them), other tips...
and teach me where to get them. I promise not to make any many bad puns before 9 am in consideration of your fine help.
Thanks.
 
Last edited:

Cheechako

Vaping Master
ECF Veteran
Verified Member
Feb 11, 2012
5,192
39,314
Arizona
The M tip is going to the dump. The Air tip is nearly as bad. I've never bought a tip before... just used what came on a collection on Protanks, Protank Minis, Unitanks, etc.

Please be my teachers. Not aesthetics...that's personal. Tell me about wood tips, acrylic tips, glass tips (that don't break when a chipmunk squints at them), other tips...
and teach me where to get them.

Good morning! Drip tips are so subjective...same as you , never bought one and probably never will. Switched the drip tips off the Air to the M,
did not like M tips at all! So I suppose I have no advice to give on this subject, but that doesn't stop me from being a post trollop! :D
 

rhammer186

Ultra Member
ECF Veteran
Verified Member
Jan 9, 2015
1,409
3,414
NY
Received my GS Air-M this afternoon and so far I'm loving this tank. I've not had any leaking or gurgling problems and I have been running it at 14.5w on the Istick. It is a tight fit to fill but I used a dropper and it really wasn't that big of a deal. Loaded up some Crème Brulee from Nicoticket and the flavor taste much better in the GS Air but that stands to reason. I'm probably not the best person for comparisons because I have been using a Protank 2 and this is my first "big girl tank".

Trying to decide what flavor to put in the 2nd one for more testing, but can't stop vaping this CB!

I will definitely be interested in buying more at a later date and need to find some coils for when this one does give out. Which may be tonight unless I get to bed! :p

I had the same issue with the flavor being slightly behind the GS Air....but as I expected, once the coils broke in the flavor in the M improved greatly. I think it exceeds the GS....either that or my taste buds just used to it. For me now, its extremely flavorful. I'm loving it :)



Please be my teachers. Not aesthetics...that's personal. Tell me about wood tips, acrylic tips, glass tips (that don't break when a chipmunk squints at them), other tips...
and teach me where to get them. I promise not to make any many bad puns before 9 am in consideration of your fine help.
Thanks.

I always wondered the same thing. I see on the Classifieds tips that sell before you can blink twice for $25+ and never understood it.

Teach me too!!!!!!!!!!!! :lol::lol::nun::nun:
 

LynnNC

Resting In Peace
ECF Veteran
Verified Member
Sep 1, 2014
10,347
88,071
NC
I've had something weird to happen this morning. I have a GS 16S with an airbase using an air coil. When I put it in last evening the ohms were 1.6. Same thing this morning. Hit it at break time and the harsh burnt liquid almost shredded my throat. Istick was sitting at 10W where it had been, but the coil is reading 3.1 ohms. Anybody??
 

GranFumador

Ultra Member
ECF Veteran
Sep 12, 2013
1,607
17,647
Peoples' Bucolic Republic of Maine
I have no advice to give on this subject, but that doesn't stop me from being a post trollop! :D
Good Morning, Cheech. Have you fixed Mud's monkey yet?

Do you think Lynn used her magical powers to divert my stuff?


]Your item departed our USPS facility in NORTH HOUSTON, TX 77315 on April 14, 2015 at 3:03 am. The item is currently in transit to the destination. And hasn't been seen, scanned or heard from ever again.
 

GranFumador

Ultra Member
ECF Veteran
Sep 12, 2013
1,607
17,647
Peoples' Bucolic Republic of Maine
I've had something weird to happen this morning. I have a GS 16S with an airbase using an air coil. When I put it in last evening the ohms were 1.6. Same thing this morning. Hit it at break time and the harsh burnt liquid almost shredded my throat. Istick was sitting at 10W where it had been, but the coil is reading 3.1 ohms. Anybody??

Hi Lynn,
Happened to me a while ago. One of the dual coils snapped or died of natural causes.
 

Cheechako

Vaping Master
ECF Veteran
Verified Member
Feb 11, 2012
5,192
39,314
Arizona
Hit it at break time and the harsh burnt liquid almost shredded my throat. Istick was sitting at 10W where it had been, but the coil is reading 3.1 ohms. Anybody??

Bikerstein stated that when this happens one of the coils isn't firing. Kivrin had this and fixed it by turning the coil in the base a tad bit, Hence "Kivrin's Kure!"
Good Morning, Cheech. Have you fixed Mud's monkey yet?

Do you think Lynn used her magical powers to divert my stuff?


]Your item departed our USPS facility in NORTH HOUSTON, TX 77315 on April 14, 2015 at 3:03 am. The item is currently in transit to the destination. And hasn't been seen, scanned or heard from ever again.

There is no fixing Mud's monkey! :D
You're package has entered the Twilight Zone...but it will be a pleasant surprise when it finally gets there!
 
Last edited:

GranFumador

Ultra Member
ECF Veteran
Sep 12, 2013
1,607
17,647
Peoples' Bucolic Republic of Maine
Wow! :blink:
Teach me how to make $25 drip tips!

1) Grab a tip from any old tank
2) Dip in acid bath until well pitted and discolored
3) Rinse well and dry
4 Buff off any burrs with your handy Bridgeport lathe or a Dreml
5) List on eBay or Etsy: "Rare early vaporiseur tip. Possibly used by Tibs or Elvie-Emm"
 

Cheechako

Vaping Master
ECF Veteran
Verified Member
Feb 11, 2012
5,192
39,314
Arizona
1) Grab a tip from any old tank
2) Dip in acid bath until well pitted and discolored
3) Rinse well and dry
4 Buff off any burrs with your handy Bridgeport lathe or a Dreml
5) List on eBay or Etsy: "Rare early vaporiseur tip. Possibly used by Tibs or Elvie-Emm"

:laugh::lol::lol::lol::lol:
 

tiburonfirst

They call me 'Tibs"
ECF Veteran
Verified Member
Feb 23, 2010
26,883
260,345
1) Grab a tip from any old tank
2) Dip in acid bath until well pitted and discolored
3) Rinse well and dry
4 Buff off any burrs with your handy Bridgeport lathe or a Dreml
5) List on eBay or Etsy: "Rare early vaporiseur tip. Possibly used by Tibs or Elvie-Emm"

hmpf! :D

but there are some beautiful tips out there ;)

my preference lies with ss or glass and i came across those on hg - i've been taking a liking lately to those short, stubby ones :D
5pcs PMMA Glass Mouthpiece for Joyetech eGo One




very, very reasonable especially if you could get them across the hall ;)
 

mudram99

Ultra Member
ECF Veteran
Verified Member
Jul 6, 2014
1,537
7,809
South Jawja, United States
I've had something weird to happen this morning. I have a GS 16S with an airbase using an air coil. When I put it in last evening the ohms were 1.6. Same thing this morning. Hit it at break time and the harsh burnt liquid almost shredded my throat. Istick was sitting at 10W where it had been, but the coil is reading 3.1 ohms. Anybody??

You lost one of the two coils. And the are running a single coil (2) 3.2 ohm coils in parrallel equal 1.6 lose one and you jump to 3.1/3.2
 

mudram99

Ultra Member
ECF Veteran
Verified Member
Jul 6, 2014
1,537
7,809
South Jawja, United States
1) Grab a tip from any old tank
2) Dip in acid bath until well pitted and discolored
3) Rinse well and dry
4 Buff off any burrs with your handy Bridgeport lathe or a Dreml
5) List on eBay or Etsy: "Rare early vaporiseur tip. Possibly used by Tibs or Elvie-Emm"

Heck and dang skippy! I'm getting in a bidding war on those! :)
 
Status
Not open for further replies.

Users who are viewing this thread