Eleaf GS Air Fan

[Cheechako]

Honestly, I did what Kivrin did, just found something that fit the slot comfortably and went from there...
(I am sitting here laughing my a** off at the past posts and this one. I am such a pervert)

 

[Cheechako]

You can also try taking a needle file to the notches on the head and open them up to 2.4mm or so and wrap around a 3/32" bit. That's what I do for my Kanger heads.

Are you not afraid of exposing the killer chinese brass! Birth defects! Cancer! Low tire pressure!

 

[Kivrin]

 

[Bikenstein]

I use 1/16 (approx. 1.5mm) or .0625" and 5/64 (approx. 2mm) .0781. buy the cheapest drill bits you can get, unless you plan to drill with them.

 

[Cheechako]

I should use that for my avatar...

 

[Cheechako]

I use 1/16 (approx. 1.5mm) or .0625" and 5/64 (approx. 2mm) .0781. buy the cheapest drill bits you can get, unless you plan to drill with them.

Must be why I had such good luck with accidentally using 16 gauge needle=1.65 mm

 

[aldenf]

Are you not afraid of exposing the killer chinese brass! Birth defects! Cancer! Low tire pressure!

It wouldn't be my first flat tire...

 

[Bikenstein]

Must be why I had such good luck with accidentally using 16 gauge needle=1.65 mm

I like the 2mm (5/64") better. You get to use a bigger wick and it's easier for me to work with. I get more flavor with it. 16ga. is 1.59mm (.0625") 1/16... 14ga. is 1.98mm(.078") 5/64

 

[rocketman29]

I'm thinking of getting one of these.

$2.74 Vaping Coil Winding Jig Tool for Rebuildable Atomizers - stainless steel / 1.5mm + 2.0mm + 2.5mm + 3.0mm + 3.5mm sections at FastTech - Worldwide Free Shipping

 

[IMRs]

I like the 2mm (5/64") better. You get to use a bigger wick and it's easier for me to work with. I get more flavor with it.

And this is on the 'Airs coils Bike?

 

[Cheechako]

I like the 2mm (5/64") better. You get to use a bigger wick and it's easier for me to work with. I get more flavor with it.

Must be my bony little rat hands, 16 gauge works great for me.
Of course, after a couple of years doing recoils on Mini Protanks and evods, the Air coils seems like an aircraft hanger!

 

[Bikenstein]

And this is on the 'Airs coils Bike?

Yeah on the airs. I do 3mm coils on my drippers most of the time

 

[Cheechako]

I almost forgot! The little blue screwdriver everyone gets with the RTA's works great also!
Someone would have to put calipers on it to see the size...

 

[TrollDragon]

Needle Size Chart:
Needle gauge comparison chart - Wikipedia, the free encyclopedia

Decimal to MM Chart:
inch/mm CONVERSION CHART

 

[Bikenstein]

Must be my bony little rat hands, 16 gauge works great for me.
Of course, after a couple of years doing recoils on Mini Protanks and evods, the Air coils seems like an aircraft hanger!

Are you sure you're not using 14ga.?

 

[IMRs]

Are you sure you're not using 14ga.?

The 16 filler tube is Purple.

 

[aldenf]

Are you sure you're not using 14ga.?

Green is 14G. Purple is 16G.

 

[TrollDragon]

Hopefully in this case the catch is better than the chase.

By Rick?

Or Lemmy?

 

[Cheechako]

Are you sure you're not using 14ga.?

Medical color code (pink) for gauge size in needles indicates I'm using an 18 gauge needle.
So I have been in error all this time!
I think the blue screwdriver would be very close to a 14 gauge needle...

 

[IMRs]

Medical color code (pink) for gauge size in needles indicates I'm using an 18 gauge needle.
So I have been in error all this time!
I think the blue screwdriver would be very close to a 14 gauge needle...

In the video, it truly looks purple to me. Is this another Chinese trick with the fuchsia that was suppose to be pink?