Trying... thanks.Hang in there, LVM.
Wow, that's pretty! Since when Calli?? I didn't hear anything about those.So anyone try out the Pure Cotton Head or TC head?!?
View attachment 461634
View attachment 461635
GS Air Pure Cotton Head & TC Head
I agree with everything but the last sentence because some 1.5 ohm dual coils are not made with two 3 ohms.[Copy and paste from a previous discussion on the subject:]
As coils age, they have a tendency to change resistance--it can go up or down, depending on what's happening with that thin, fragile wire.
If your atty reads a very high resistance (K Ohms, M Ohms.. or infinite Ohms) then it is "open," which means that the coil is broken, which means it's dead.
If it isn't quite "open", or broken, yet, but reads substantially higher resistance than the stock numbers.... it is fixin' to go open--just as bad.
If you are getting very low resistance, less than .5Ω, a short is about to happen or has happened.
0Ω reading indicates a short.
With dual coils, if one coil pops, the resistance of your atty will double. So, with 1.5Ω dual coil atty, 3Ω (or thereabouts) reading indicates that one coil is dead and the other one is still alive and well.
Must have happened in the last few days. No CLR though... yet... I keep meaning to email them about that.Wow, that's pretty! Since when Calli?? I didn't hear anything about those.
I gotta try those TC heads. I see they have a gold plated pin for conductivity so the TC will work. I guess they will introduce a new TC mod.So anyone try out the Pure Cotton Head or TC Head?!?
GS Air Pure Cotton Head
Heating wire: Kanthal
Resistance: 1.2Ω
Wattage: 8-30W
Wick material: pure cotton
View attachment 461634
GS Air TC Head
Heating wire: Nickel 200
Resistance: 0.15Ω
Wattage: 30-40W
Wick material: pure cotton
View attachment 461635
GS Air Pure Cotton Head & TC Head
That's on the high side for nickel. I run .087 to .10GS Air TC Head
Heating wire: Nickel 200
Resistance: 0.15Ω
Wattage: 30-40W
Is that poor copy-editing, or are these for cloud chasers? 0.15!
Sorry, what's CLR? Obviously not good with the acronyms and too lazy to look them up.Must have happened in the last few days. No CLR though... yet... I keep meaning to email them about that.
I agree, something seems to be off with the specs or new iSticks are coming out?!?!GS Air TC Head
Heating wire: Nickel 200
Resistance: 0.15Ω
Wattage: 30-40W
Is that poor copy-editing, or are these for cloud chasers? 0.15!
Wow, I had not seen those.So anyone try out the Pure Cotton Head or TC Head?!?
GS Air Pure Cotton Head
Heating wire: Kanthal
Resistance: 1.2Ω
Wattage: 8-30W
Wick material: pure cotton
View attachment 461634
GS Air TC Head
Heating wire: Nickel 200
Resistance: 0.15Ω
Wattage: 30-40W
Wick material: pure cotton
View attachment 461635
GS Air Pure Cotton Head & TC Head
I agree with everything but the last sentence because some 1.5 ohm dual coils are not made with two 3 ohms.
If (big IF) eleafus is consistent in their schematics, they are single coil. The GS Air coil diagram shows this for the current/original coils:These appear to be single coil.
So anyone try out the Pure Cotton Head or TC Head?!?
GS Air Pure Cotton Head
Heating wire: Kanthal
Resistance: 1.2Ω
Wattage: 8-30W
Wick material: pure cotton
View attachment 461634
GS Air TC Head
Heating wire: Nickel 200
Resistance: 0.15Ω
Wattage: 30-40W
Wick material: pure cotton
View attachment 461635
GS Air Pure Cotton Head & TC Head
That they do. 1.2Ω down from 1.5Ω... could be typos?!?!?These appear to be single coil.
Joyetech is the parent company (I believe to Eleaf) and they make CLR heads (rebuildable). Doesn't fit the GS Air series though.Sorry, what's CLR? Obviously not good with the acronyms and too lazy to look them up.![]()