Eleaf GS Air Fan

[Bikenstein]

They are the same. I have several old ones if you want to rebuild.

They worked in the Protank II and even in the Protank III if you used an extra sillycone cup upside down on the stem.

Thanks, I have some to rebuild. Just wanted to get her goin for sure with some new ones cause I may be called on a Plant outage any day. (First job since last November)

 

[Bikenstein]

I just remembered that there was a longer chimney pin in my MT3's. They may have been a mismatch to the evods because the evods were too short.

The T3S fits the Evod but the Evod coil won't fit the T3S without leaks. I don't remember if I doubled the grommet seal to fix that or if I did fix it......

 

[Canno]

I used the T3s for a long time. I drilled the air holes in the base bigger. Made em mo betta.

EDIT: That was Tootle Puffin

 

[LynnNC]

I used the T3s for a long time. I drilled the air holes in the base bigger. Made em mo betta.

I did that too! And you're right, it did make them better!

 

[GranFumador]

Don't know the T3s, but IF Protank II coils will work, I'll put some new ones in the mail to you tomorrow. Since you folks introduced me to the GS-Air, the Kangers get no love or use here.

 

[IMRs]

The T3S fits the Evod but the Evod coil won't fit the T3S without leaks. I don't remember if I doubled the grommet seal to fix that or if I did fix it......

That's it! My Memory banks are going.

 

[Bikenstein]

I did that too! And you're right, it did make them better!

Cloud Chaser!.....

 

[tiburonfirst]

I was using MT3's a couple of years ago. Would they help at all Bike? (Large evods)
I never bought any T3S's.

they would fit if they are mt3s not just mtr3

 

[Bikenstein]

Don't know the T3s, but IF Protank II coils will work, I'll put some new ones in the mail to you tomorrow. Since you folks introduced me to the GS-Air, the Kangers get no love or use here.

Thanks Gran, but they won't work.

 

[IMRs]

they would fit if they are mt3s not just mtr3

I love how Kanger was confusing everything back then.

 

[Canno]

Thanks Gran, but they won't work.

I'm almost certain they do Bike. The protank II was a single coil.

 

[Bikenstein]

I used the T3s for a long time. I drilled the air holes in the base bigger. Made em mo betta.

EDIT: That was Tootle Puffin

I drilled an Evod (my first atty) and sub ohmed with it.. Still smaller clouds...maybe a MiniWomper

 

[Bikenstein]

I'm almost certain they do Bike. The protank II was a single coil.

Well I'm not so certain now, since you are almost certain. I never personally checked it out. I know the 2 was a single coil. I had a PT3 and from what I recall t2 coil would fit it. But I just put a T3S coil in a PT3 so you are probably right.

 

[GranFumador]

For whatever it's worth, from s-v...usually reliable...

Kanger Single coils 1.8 2.2 2.5 2.8 3.2 Ω
Genuine Kangertech, Verify we are an Authorized Distributor

Fits:

Protank 1, Mini Protank 1

Protank 2, Mini Protank 2, Mini Protank 2V2

Unitank, Unitank Mini

EVOD (version 1)

 

[IMRs]

Well I'm not so certain now, since you are almost certain. I never personally checked it out. I know the 2 was a single coil. I had a PT3 and from what I recall t2 coil would fit it. But I just put a T3S coil in a PT3 so you are probably right.

Imagine someone seeing this for the first time.

 

[Canno]

I think you are right Bike. The stems in the Protank II may be fatter. You can use the T3S coils in the Protank II but not the other way around. Gibb's will get me. Sorry.

I do think you can switch the stems though.

I've slept since then.

 

[gerrymi]

The stock one was lost and 2 of my acrylic aluminum hybrid tips have fallen out too. Right now I'm using a disposable silicone tip (I usually just use these to let non vapers try it out) as my drip tip.

Dental Floss...over or under the O-ring...

OK, it's been 20 or 21 months and my wife's Kanger T3S is losin flavor and apparently the coil is gunking up. It still works but is performing poorly. Anybody have a lead on where to buy at a good price?

TOCC Organic Cotton T3S MT3S Coils

TOCC's have 100% Organic Cotton wicking material inside, instead of the older fiber wick. Our samples of these coils went over HUGE, the flavor from these rivals the Subtank OCC Coils

Compatible With:


T3S Clearomizers


MT3S Clearomizers

Kanger T3S Coils TOCC Organic Cotton - Kanger Coils - Kangertech - Clearomizers Tanks

 

[IMRs]

 

[GranFumador]

This site says they don't work.

Kanger ProTank & Evod Coils - 5 Pack - 1.8ohms (New SOCC)

 

[IMRs]

This site says they don't work.

Kanger ProTank & Evod Coils - 5 Pack - 1.8ohms (New SOCC)

discountvapers is where I used to buy all of that stuff. He's pretty thorough.