Eleaf iStick information??

[adribear]

I am very new to this and am looking for some answers for I am still very ignorant towards this vaping thing.

I have an Eleaf iStick 20w with a nautilus mini tank on it.
I was curious as to what voltage and wattage was best for the recommended tank (nautilus mini), and is there any other tanks I may put on my iStick that will give off more production?
Thank you

 

[dcfluegel]

howdy - and welcome!

i believe, typically, with the nautilus mini tank (does it have a 1.8 ohm coil head in it?) you should find the 'sweet spot' around 9-14 watts, depending somewhat on the liquid you have in it (pg/vg ratio, nic level)... best course is to start low - around 7 watts - and work your way up in 1 watt increments...

 

[SomeTexan]

You adjust the power to suit the way you vape. Some people may like it around 7watts, others may prefer if at 20. My girlfriend vaped her Nautilus around 7. For more vapor, a Kanger SubTank mini is common, although it will work best at more than 20 watts. It would still outperform the Nautilus at 20.

 

[Ou2mame]

If you are a mouth to lung vapor, the Nautilus is probably one of the best options. If you inhale straight into your lungs then you would probably want something less restrictive like subtank or delta 2. Wattage is preference. Too little power with a juice too thin (high in pg) might lead to flooding because it will bring juice into the coil but not vape off.

 

[Katya]

I have an Eleaf iStick 20w with a nautilus mini tank on it.

Hi Adri and welcome!

The most important thing you need to know about your iStick 20 is that it fires a full volt higher (long story ) than what your display shows--IOW, when you set your iStick 20 at 3.2v, you're actually getting 4.2 volts.

So, with that in mind, start at the very lowest (3v) setting and see what happens. Adjust up, slowly, only if you absolutely have to.

Good luck!

 

[Canadian_Vaper]

I am very new to this and am looking for some answers for I am still very ignorant towards this vaping thing.

I have an Eleaf iStick 20w with a nautilus mini tank on it.
I was curious as to what voltage and wattage was best for the recommended tank (nautilus mini), and is there any other tanks I may put on my iStick that will give off more production?
Thank you

Set it to 6 watts and slowly increase it 1 watt at a time till you find the flavor you're looking for.

Welcome to ECF!

 

[GlacierBabe]

Hi Adri and welcome!

The most important thing you need to know about your iStick 20 is that it fires a full volt higher (long story ) than what your display shows--IOW, when you set your iStick 20 at 3.2v, you're actually getting 4.2 volts.

So, with that in mind, start at the very lowest (3v) setting and see what happens. Adjust up, slowly, only if you absolutely have to.

Hi Adri and welcome!

The most important thing you need to know about your iStick 20 is that it fires a full volt higher (long story ) than what your display shows--IOW, when you set your iStick 20 at 3.2v, you're actually getting 4.2 volts.

So, with that in mind, start at the very lowest (3v) setting and see what happens. Adjust up, slowly, only if you absolutely have to.

Good luck!

Good luck!

Does Eleaf iStick 40W do the same thing?

 

[Sir2fyablyNutz]

Does Eleaf iStick 40W do the same thing?

No. The 20 watt was a first run of it's kind.

 

[GlacierBabe]

No. The 20 watt was a first run of it's kind.

Ok thanks. Just bought my first one. Waiting for it to arrive and doing some research so I will feel more comfortable when it get here LOL