eleaf lemo drop juice flow

[Shafeeq Hafidz]

hello im new here, just got my lemo drop days ago.
so far im really satisfied with it. but the thing is, i notice, since i vape on this, my juice drains really fast.
its like 3x faster than my taifun gt.
is there any way to reduce the juice drain?

here is my setting
28g kanthal, 3mm drill bit, 1.3ohm fires at 14w.

thanks in advance.

 

[Unforeseen]

Welcome to the forum. Perhaps you can try to use less wicking material. However, there may not be a way to decrease the rate of e-liquid consumption of your lemo. This might be attributed to the enlarged e-liquid channels on the deck of the tank.

 

[Wolfenstark]

They do go through juice fast.

Maybe lessening the airflow and/or a smaller diameter coil would lower the juice usage.
Though your vapor production may suffer.

 

[Shafeeq Hafidz]

oww, thats sad. ive tried to reduce the air flow, but its still the same. well, ill try a smaller coil, maybe 2mm. and less wicking material. i love this tank so much, but with 30ml juice for 3days, its just too painful. i cant afford it tho

 

[Mike718]

I don't think there's a way to reduce juice usage. Mostly every atomizer you use to lung hit will use more juice.

 

[LuNar]

Ya got a lemo as well. 28g 2.4mm diameter, about 11 watts and it runs through juice lol. I guess you could try to take shorter puffs or even try to use it less often but this thing is just built to be a juice hog.

30mls of juice in 3 days?? Ouch.

Also if your using like 2 or 4mg nic I guess you could bump it up to like 6 or maybe even 8 mg(8 being the highest I would ever go on a rta.) so that you can get your nic rush sooner and faster so that you might use it less often and conserve some of your juice...?

 

[Neukom720]

Hey bud, same problem with my regular lemo but I have 4-5 different devices I pick everyday so it feels like I don't full it up as much but I know it's a hog lol. Do not use less cotton that will use more juice or worse it will flood. I would try using more cotton or when your wicking the coil, try using a thicker preice so when you feed it through the coil it has a little more resistance than it normally does. Don't go crazy so it's like impossinle to feed it through but you get what I'm saying. Also like said above, try a micro coil 2mm something like that, and make sure it's a micro coil and no spaces between the coils because that will give more surface area and use more. Good like lmk how it works out. Btw love the lemo I thinks it's better than my Kayfun V4

 

[Shafeeq Hafidz]

Thanks guys. Ive tried everything, and the only way it work is by reducing the air flow. How ever i still got another problem, it leak. If its standing straight up, its okay, but when lying down, it leaks tru the air hole. Any tips on that?

 

[sprki]

Thanks guys. Ive tried everything, and the only way it work is by reducing the air flow. How ever i still got another problem, it leak. If its standing straight up, its okay, but when lying down, it leaks tru the air hole. Any tips on that?

Welcome buddy! The Lemo is great, but building it is tricky. Usual suspects for your leaking issues:

1) Incorrectly possitioned or faulty o-rings. Check all your componenents before filling your next tank. Something might be breaking the vacum.
2) Dents in the body. Have you dropped it? A dent might affect the vacum.
3) Too little wick. The Lemo is not a Kayfun. Less is not necesarilly more.

I also found myself using less juice by opening it up all the way, increasing the wattage, and taking shorter pulls. Experiment!

 

[Despraci]

I just got a Lemo and it is a juice hog when comparing the same build I use in a Kayfun... but I actually like the vape a lot better then a Kayfun for certain liquids. The sweeter liquids seem to not gunk the coils in the Lemo as much as they would in a Kayfun. It uses a little more juice... but I find it an acceptable trade off.

 

[Mala]

The Lemo is my favorite topper, great vapor and flavor!

I do go through more ejuice using it but IMO it's worth it tenfold.