eVic Toppings

[MoonLit_Water]

Hello All
I have had My eVic about one week now, I'm using Tabac BCC's 1.8Ω on it, was just wondering what others are using and any input as to why You're using what You use.
Also when adjusting do You generally use VV or VW. I use VW only because of the smaller increments.
Thanks

 

[PersonaNonSmoka]

I'm using everything I've got on it! Vivi Nova mini (so far 2.4 and 2.8 ohm heads). iClear 1.5 ohm 16's. 2.0 ohm dual carto tanks. Single coil 1.7 ohm mega cartos and just picked up a 2.0 ohm bridgeless for some dripping. I've been using the VW because I've been switching around so much.

I can't really pick a favorite as they all perform great. I've yet to put a Kanger T3 on it, so that will probably be next.

 

[r3Yr3y]

yea im also using everything i have on it aswell. iclear30 2.0ohms,vivi nova 3.0 ohms,octopus 2.7 ohms,ce3 clearos 2-3ohms and i have a aga-t waiting for the mesh to arrive in the mail as i cant get the darn thing to wick with silica but thats another story..

favorite as of right now would have to be the iclear30 for flavor mostly that darn vivi mutes the flavor even with my own built coils.

vv or vw? well vv just because im used to it noting really special regarding that

 

[legaldisaster]

An assortment of vivi nova tanks, a bullet and a few vape only bcc tanks, all work great !

 

[cricque]

vivi nova, aga-t2, phoenix rba, mini vivi nova. Haven't put any carto's on yet, but i rarely use those these days anyway

But for me it works extremely well with a vivi nova

I set it to mvr vv, i put a profile for 4v (0.5), 4.4v (0.8), 4v(1.2), 3.9 (2.5), 3.8 (3,5), 3.7 (10), this has been working out quite well for me with 2.4 vivi heads. I get this smooth vape, clouds of vapor and I just like it that way

If I use an aga-t i set it to vw/vv, but the mvr vv is for my vivi nova. Alreadey ordered a 2nd one

 

[speedjason86]

I have mini nova and ce4's so far.
I am thinking of getting a bcc but idk if I can vape 3ml before I get bored with the flavor.

 

[crxess]

Geez, I think I've used about everything on mine.
T3, MT3, mini T3, Mini-Did, Smok Vivi, Vivi Nova, cartomizers

I think the Black Vivi STV looks best on mine in mini mode with the carbon fiber 18350 tube, but I don't stick with any choice for long.

 

[MoonLit_Water]

Thanks for all the input. Looks like I am going to go shopping again, if for nothing else just to have some options for mood changes. I do want to get the black bat case etc. And also have the ability to go mini too.

 

[RXDI]

IGO-L

 

[Sinkhole]

Thanks for all the input. Looks like I am going to go shopping again, if for nothing else just to have some options for mood changes. I do want to get the black bat case etc. And also have the ability to go mini too.

I typically run a DCT with a 1.7Ω single coil carto. I have also used Kanger T2's, a Vivi Nova Mini, and have a Kanger T3, that just refuses to fire on my eVic, but works on my eGo-C Twist. I bought the black tube kit from myvaporstore.com for $12.50 plus shipping and used the 5% off code (5ecf). I'm currently looking for a quality pyrex black carto tank to match it.

 

[crxess]

Pull the Kangers center pin down a tiny bit(very tiny) It Will fire.
Kanger got kind of dumb on the T3/MT3's and Flat cut the pin. It sits to shallow for most fixed pin mods.

 

[Gimpy1261]

I got mine about a month ago.
Put a mini Viva Nova on it. Haven't seen the need to change anything yet.

 

[TK-4261]

IGO-L various ohms and 1.5ohm 2 hole smoktech carto tanks

 

[bapeman]

I'm using everything I've got on it! Vivi Nova mini (so far 2.4 and 2.8 ohm heads). iClear 1.5 ohm 16's. 2.0 ohm dual carto tanks. Single coil 1.7 ohm mega cartos and just picked up a 2.0 ohm bridgeless for some dripping. I've been using the VW because I've been switching around so much.

I can't really pick a favorite as they all perform great. I've yet to put a Kanger T3 on it, so that will probably be next.

Be careful using T3's on your eVic, if you screw it on too tight then you'll need to remove the top ring to get the clearo off or else you'll just unscrew the tank portion and end up with a bunch of spilled, precious ejuice! Also, I find that some T3's don't make a good connection (no Atomizer found); using a paperclip or something to pry up the connection post a little bit seems to help.

 

[StereoDreamer]

Vivi Novas (1.8 and 2.4), iClear-30, SmokTek RDAs, Aqua Vapor Cigs 901 attys (with adapters), Terminator-C, IBTanked carto tank with a SmokTek single coil, 2-hole 2 ohm XL carto.

And EVERY device I put on my eVic is just AWESOME.

The real winners so far though are the RDAs and the iClear-30. Smooth, clean and clear flavors with TONS of vapor production.

I'm running it mostly VW, and varying between 4.9 and 7.1 watts, depending on device and juice. Some juices (like HHV's Serendipity) vape best at 7.1w, while others really bloom at lower power (4.9w) like AiV's "Zombie Apocalypse".

So far, I am VERY impressed. I wish I could store more than one VW program, and chose varying power curves at different power levels--the limit of only ONE VW program is sort of disappointment. But other than that, I LOVE it so far...

 

[crxess]

Never have a problem with my T3's on the eVic.
Just don't over tighten.

 

[StereoDreamer]

Never have a problem with my T3's on the eVic.
Just don't over tighten.

The first MT3 I ever bought leaked 3/4 of it's content ll over my mod the first time I put it on.

That bastich leaked like Bradley Manning...

 

[ngeepro15]

What I use

 

[legaldisaster]

My latest has been a plethora of Kanger Protanks, but I still use my Vivi Novas and my VapeOnly BCCs, and I also got a bullet and double barrel recently that get some action as well.