eVic-VT mini?

[Mercster]

2 several screwinga nd unscrewing
...
4 freezing the whoile darm set up on the firdge before locking

These two I didn't try, because even if they worked, who wants to deal with that ....? I mean...use NI200 mode? Sure. Keep my resistance unlocked? No problem. But I'm not gonna play whack-a-510, unscrewing and screwing all day long just to have my device work.

5 using ss wires on ti or vw mode on kanthal for a few days,weeks
then redo the update (some of use were doing this then the update showed up and when we updated it was fixed,not sure if the update had anyrhing to do with it hahahahha)

Haha...just for giggles, I just re-downloaded the software update. Downgraded all the way down to 1.02. Then flashed up to 1.10. Then flashed up to 1.20. Also kept a battery in it. Maybe I'll slap a TI coil in it later today, if I feel like abusing myself.

 

[zeus01]

These two I didn't try, because even if they worked, who wants to deal with that ....? I mean...use NI200 mode? Sure. Keep my resistance unlocked? No problem. But I'm not gonna play whack-a-510, unscrewing and screwing all day long just to have my device work.

Haha...just for giggles, I just re-downloaded the software update. Downgraded all the way down to 1.02. Then flashed up to 1.10. Then flashed up to 1.20. Also kept a battery in it. Maybe I'll slap a TI coil in it later today, if I feel like abusing myself.

well those are l the thjngs we tried so far
at the moment we tried to fix the device withiut the uodate...

soem of them worked,some temporarily

thought you read the entire thread?
cause those were there
and everyine thatbwas on the thread could feel that vibe on how we were inches away from grabbing a hammer.
i

Sent from my AMOI N820 using Tapatalk

 

[Mercster]

thought you read the entire thread?
cause those were there
and everyine thatbwas on the thread could feel that vibe on how we were inches away from grabbing a hammer.

Sure, I read the entire thread, and I saw those, I'm just saying I didn't try them. I'm not slagging anyone off or criticizing, I'm just saying that I wouldn't consider those tactics "solutions"...if I have to freeze my mod or unscrew my atty every 5 minutes to get a decent vape, it's a hopeless cause anyway.

 

[gerrymi]

VTC Mini is a great mod in VW mode,

Hey the new Wismec 75watt TC looks really nice to.

Merc...agree the VTC Mini is GREAT in VW mode.

As a low wattage "tootle puffer" I love it. (Plus...I do not use TC since I'm still concerned about off-gassing/leaching of nickle into the ejuice.)

Have a Cyan one and was going to get a Black one.

But then...Snyder...you mentioned the Wismec 75WTC.

It appears to be quite similar to the VTC...but has that incredible fire button...

http://www.angelcigs.com/wismec-pre...tional-tc-bypass-vw-mode-black-authentic.html

ADDED: ECF thread I found about the Wismec...

https://www.e-cigarette-forum.com/forum/threads/wismec-75w-tc.708011/

 

[AtmizrOpin]

does anyone know of a vendor that is shipping out the vtc mini with the new fw already installed?

 

[Nick N]

does anyone know of a vendor that is shipping out the vtc mini with the new fw already installed?

Not 1.20, but efun shipped mine a few weeks ago with 1.10 (which was the latest at the time), hardware 1.10. They seem to get theirs directly from Joyetech?

 

[Mercster]

Hey the new Wismec 75watt TC looks really nice to.

But then...Snyder...you mentioned the Wismec 75WTC.

It appears to be quite similar to the VTC...but has that incredible fire button...

http://www.angelcigs.com/wismec-pre...tional-tc-bypass-vw-mode-black-authentic.html

ADDED: ECF thread I found about the Wismec...

https://www.e-cigarette-forum.com/forum/threads/wismec-75w-tc.708011/

Speaking of the Wismec Presa 75WTC...from another thread...

It's the Joyetech Evic VTC mini chip...

No way I'm touching that with a ten foot pole. Apparently Joyetech owns Ismoka, eLeaf, AND Wismec. While I still like iStick, it's a known quantity since I have two of them and they both work great.

 

[cindycated]

does anyone know of a vendor that is shipping out the vtc mini with the new fw already installed?

hahaha I'm waiting for everybody to be out of stock so I can get in on fresh stock with everything hopefully fixed.

 

[theCURE812]

noob question pls...guys just want to ask.. can we use tiger wires on our vtc mini? if yes what build to make? TIA!

 

[Jim_ MDP]

Had to look up Tiger Wire, but sure.
It's Kanthal, so no TC benefits, but if it ohms out above the VTC's min res... it's just a coil, hit it.

eta: It's just a twisted of round and ribbon. If you don't roll some power hungry monstrosity, it'll be fine with the VTC's watts.

 

[Mercster]

noob question pls...guys just want to ask.. can we use tiger wires on our vtc mini? if yes what build to make? TIA!

Dunno what tiger wire is, but as long as what you build with it is within the operating parameters of your mod, you'll be fine. You have an OHM meter, right?

 

[Mercster]

OK, I got bored and I think I'm gonna try TC mode again in the VTC Mini in case God fixed it for me. Anyone have a recommendations on a titanium build I should use? Very low ohms, high ohms?

 

[Mercster]

Oh, and I've known this for awhile but forgot to bring it up: Guess what product pbusardo is reviewing next?

I'll give you three guesses and the first two don't count.

 

[Jim_ MDP]

His will work perfectly.

JT will say... "told you so... user error".

 

[Mercster]

Yep, I know it. But with how in-depth he goes, maybe he'll suss out some pattern that could at least give us a hint...

 

[NHXJer]

Just wanted to add since people are mentioning running SS coils in Ti Mode as a possible fix:

I'm running 430SS in Ti Mode and frequently experiencing the instant temp protect problem as others describe here. At first I thought it was poor performance of my new tank (UD Bellus), but discovered it's not. One benefit of running SS coils is that they'll fire in regular VW mode. And the Bellus has been stellar this way - 30W 80vg/20pg juice and I can chain-vape this all day without even a trace of dry hits.

With this setup I'm still very much satisfied with my VTC - even with it's problems I'm thinking about buying another one (and a couple more Bellus tanks) and cross my fingers that an update in the future rectifies the TC issues.

 

[Jim_ MDP]

Yep, I know it. But with how in-depth he goes, maybe he'll suss out some pattern that could at least give us a hint...

Agreed. And if it's possible, I hope it happens.

I was just being snarky.. as usual.

 

[Mercster]

I'm running 430SS in Ti Mode and frequently experiencing the instant temp protect problem as others describe here. At first I thought it was poor performance of my new tank (UD Bellus), but discovered it's not.

Interesting...thanks for the report. I'm just getting started in building so I'm gonna stick to kanthal and titanium for now (except the fact that the Uwell Crown's pre-build coil heads use SS got me very excited...)

 

[NHXJer]

Try some SS - you'll be glad you did!

 

[xcrazydx]

Hopefully they fix it soon. I just got one