Evic vt weirdness

[emp83]

Hi all. New to the forum. I've had an evic vt for a few weeks now, and it's pretty sick, but, it's started acting up. Suddenly my resistance reading is changing a lot. Not wigging out, but after vaping a bit I'll look down and notice the resistance has jumped anywhere from .02 to .08 ohms. (Never any more than that, yet.) And it does this with a brand new coil. If I unscrew the atty and put it back on it'll generally go back to the original resistance - or close - but it won't stay. Also, the toggle sticks periodically. Anyone experienced any of this? Any help is appreciated.
Suppose I should mention that I'm mostly using a subtank mini rba on it. Thanks!
Also should have mentioned this is all in regular wattage mode; I haven't tried out nickel yet.

 

[Caro123]

sorry I honestly don't know and don't have one but I did faithfully read a thread about it and someone said something about a lock - not sure what that means but I toss it out there

 

[ElevenEleven]

Resistance changes when the temperature of your atomizer rises. When it cools down the base resistance will return to normal, usually.

 

[emp83]

Resistance changes when the temperature of your atomizer rises. When it cools down the base resistance will return to normal, usually.

Hmm. Suppose that could be it. This is the most advanced mod I've used, so maybe I'm just not used to the fancy. Thanks.

 

[chopdoc]

Hi all. New to the forum. I've had an evic vt for a few weeks now, and it's pretty sick, but, it's started acting up. Suddenly my resistance reading is changing a lot. Not wigging out, but after vaping a bit I'll look down and notice the resistance has jumped anywhere from .02 to .08 ohms. (Never any more than that, yet.) And it does this with a brand new coil. If I unscrew the atty and put it back on it'll generally go back to the original resistance - or close - but it won't stay. Also, the toggle sticks periodically. Anyone experienced any of this? Any help is appreciated.
Suppose I should mention that I'm mostly using a subtank mini rba on it. Thanks!
Also should have mentioned this is all in regular wattage mode; I haven't tried out nickel yet.

Had this happen to a subtank mini. I am using the RBA deck and the bottom center post of the RBA deck wasnt actually loose but it wasnt tight either. I put a drill bit in the holes and applied a little pressure to it and the problem went away.

 

[emp83]

Had this happen to a subtank mini. I am using the RBA deck and the bottom center post of the RBA deck wasnt actually loose but it wasnt tight either. I put a drill bit in the holes and applied a little pressure to it and the problem went away.

Ah, nice. I have had that part come loose before. I hadn't even thought of that. Thanks chopdoc.

 

[r77r7r]

There is a Big thread around here on the VT, be good to join or read.

 

[emp83]

I'll have a look, r77.

 

[emp83]

Well, I've tried chopdoc's fix, and, no dice. I've also put the subtank on another mod, and got the fluctuation on that, too. Also tried a different tank on my evic with the same result. Seems to me the common denominator is the wire I've been using. Is it possible inferior quality wire could be causing this?