NEW joyetech eGo-T 2 Upgraded FLAT TOP Control Head
$15.95
Introducing the NEW joyetech eGo-T 2 Flat Top Upgraded Control Head. This sports a new flat top design that offers a very nice appearance when using with a tank such as the ViVi Nova. You can still of course, use with eGo clearomizers such as our own Stardust, ReDuX, AlphaStar, Kanger T3 and T2.
This new Flat eGo-T mod control unit DOES NOT charge with the Joyetech Fast USB charger for eGo/eGo-T/eGo-C directly. You need to attach one of our eGo 510 to eGo adpaters. This allows it proper clearance to make a connection for charging. If you don't already have one, we have them available in the drop-down box below.
You can use this control head on either the short 18350 tubes or the 18650 tubes.
Some of the features of the NEW Joyetech eGo-T 2 control head:
• 5-click on/off protection. Click five times within approximately 2 seconds to turn on and off. This normally ships in the OFF position.
• Operates in two modes: Regulated 3.3v and Unregulated 3.7v. This works identically to our regular Joyetech eGo-T 2 batteries:
◦In either mode press five times to turn the unit off.
◦Then, hold down the button until the button changes colors. This is usually about 5-6 seconds.
◦Then you must turn the unit back on with 5 clicks as above.
◦A blue LED means you are in normal 3.3v Joyetech regulated mode. A tan/brown LED means you are in the 3.7v unregulated mode where, depending on your batetry charge, you will be operating anywhere from 3.6v to 4.15 volts.
• You can use either of our button top 18350 eFest batteries or our flat top 18350 batteries available in our Atomizer and Accessories category
• THE SHORTY 18350 TUBES WILL ONLY WORK WITH THE NEW FLAT TOP CONTROL HEADS! Tips hat to Mama Monkey!
• 80mm length or 3 and 1/16th inches with 18350 and control head attached.
Last edited:
Thank you. They look like a rocketship 
