fasttech cartomizers

[albcig]

I have bought these for my X8's. They work fine, about 2.5ohms, single hole, single coil, 40mm tall. running 4 each X8's right now.. no problems

can you compare them to boge or smoktech? i've been using them for about 2 years now and im very very pleased by both. i guess the reason some people don't like carto tanks is because they somewhat get the wrong cartomizers which don't work, get flooded and so on.
so can you tell me how these perform in comparison to boge or smoktech?

 

[SupplyDaddy]

can you compare them to boge or smoktech? i've been using them for about 2 years now and im very very pleased by both. i guess the reason some people don't like carto tanks is because they somewhat get the wrong cartomizers which don't work, get flooded and so on.
so can you tell me how these perform in comparison to boge or smoktech?

These are the only cartos I have used with the X8's.. they are actually 35mm. I use only Smoktech DC cartos (45mm) in my 6ml and 3.5 ml tanks. I'm sure I could punch holes in my few 35mm Smoktech dc cartos and uise them in the X8

(Just looking at other places and these look to be boge by the packaging)

 

[albcig]

so they perform the same as a boge? so i should order them then? they are ofc shorter than smoktech. but the performance is the same?
i'm about to finish a batch of single coil 1 hole 1.7ohm smoktech and im very pleased with them. so do the the FT NON FLANGED cartos perform the same as smoktesh or boge?

 

[SupplyDaddy]

so they perform the same as a boge? so i should order them then? they are ofc shorter than smoktech. but the performance is the same?
i'm about to finish a batch of single coil 1 hole 1.7ohm smoktech and im very pleased with them. so do the the FT NON FLANGED cartos perform the same as smoktesh or boge?

Again, I normally use ST DC cartos in my 6 and 3.5 ml tanks (45mm). The cartos listed here for the X8 tank replacement have been great with my X8 tanks, but I haven't used them in anything else, as I don't have any other tanks that they would fit. But!! I do like these cartos in my X8 tanks.. so, if you have something they would fit, I would recommend them.

 

[albcig]

yes i have shorter tanks for the 35mm cartos and i can use them. so you are saying that in terms of TH flavor and general vape quality these ones perform the same as smoktech ones?

 

[theonlyace]

I bought a five pack of the small DCT's about 2 weeks ago from FT. I have tried two of the provided cartos in them so far, and didn't really have alot of bad or good to say about them. One thing I liked, they have about half of the filler in them which was easier to pre fill and maintain saturation. The flavor, and throat hit weren't spectacular but about average. I used mostly PG dominate Juices and didn't really get much flooding unless there was alot of movement. I would give it a solid 7 out of 10 overall. Plus i just like the vibrant colors or the tanks. Mine also metered out to about 2 ohms i think.

 

[Wow1420]

$1.56 DCT Pre-Punched Tank Cartomizer (Flanged) - 3.0

can't seem to find anything on these. i use boge or smoktech for my tanks and as everyone knows they work very well. im ordering some stuff from FT so i thought i can get maybe 10-20 of these. can anyone tell me how do they work? bare in mind that i'm used to the boge or smoktech performance so anything less would not be pleasing. thanks in advance for any help

I got one of the small dct tanks and one spare carto. The first carto lasted about 2 weeks of light use. I never ran the tank dry. I think I got 6 or 8 partial fills out of it before it went burned and nasty. The spare burned almost immediately, I'm confident that it was primed correctly.

I'm a ft fan, but this particular product was a dud.