- Status
T3S are one piece... This is a great find, might work! Have removable mouthpieces, could work!
Could be a helpful find. Are these a Kanger product? Just wondering about cross-model compatibility with the coil/wick units.
Thanks.
There not kanger T4 those are top coil. Maybe T3S knockoffs ? either way 5 for $14. is great price so i'll try a 5 pack.
Just goy my T2 order from them and they work good so far, on a side note dont order the ear and nose trimmer it gets hot enough to fry a egg on it
If you look at this photo from Eric at discountvapers the coils look like the coils from the fasttect T4
http://www.e-cigarette-forum.com/forum/discountvapers/422788-t3s-base.html#post9656547
Just goy my T2 order from them and they work good so far, on a side note dont order the ear and nose trimmer it gets hot enough to fry a egg on it
If you look at this photo from Eric at discountvapers the coils look like the coils from the fasttect T4
http://www.e-cigarette-forum.com/forum/discountvapers/422788-t3s-base.html#post9656547
Last edited:
With all the new items fasttech is putting up I hope its just a matter of time for them to have a protank for cheap price.
Another post said they will soon have the evods in stock.
Another post said they will soon have the evods in stock.
I just received four of these in my latest Fasttech shipment. I've only had a day or so to play with them, but so far...
The black mouthpiece is removable and is compatible with some 510 drip tips. Some fit fine, some are a bit loose.
The replaceable head appears to be the same thing as a Kanger EVOD head. Well, since I have an EVOD head in one of them at them moment, I should probably say is compatible.
The black mouthpiece is removable and is compatible with some 510 drip tips. Some fit fine, some are a bit loose.
The replaceable head appears to be the same thing as a Kanger EVOD head. Well, since I have an EVOD head in one of them at them moment, I should probably say is compatible.
That's great news. Do you have an eVic or an ego cone threaded mod? How about contact?
Fit fine on a couple of Sigeleis and a Vamo. No contact issues at all so far, although they're so similar to the EVODs in design if not looks I would have been surprised.
I have 2 of the fasttech t4s. So far they're doing fine. Unlike "real" t3s, no gurgling, no leaking, no plastic taste. The only drawback is that it doesn't wick well enough to keep up with non-stop chain vaping. The flavor seemed muted at first but improved quite a bit after 2 or 3 tankfulls.
I can second the wicking issue. I haven't started fiddling with the wicks yet, but out of the box they seem to wick a bit slowly.
Does it seem to have any leaking issues at the top from the drip tip? Now if Kanger could put out a system like this made out of pyrex that would be wonderful!
Wet the wicks a little before filling the tank for the first time. Wicking problems usually come from the wicks being bone dry
I have some of them on the way. I don't plan on using the stock wicks I'm rebuilding right out the box.
Again, for Pyrex, get a Protank. For those of us that don't want pyrex and want something cheap that uses evod heads that's unbeateable
Fastech T4
https://www.fasttech.com/products/1360400
The cliffs notes version.
When I got home l opened up the t4 and looked at the head. Meh. The wick looked like hell to me. Most likely a fiberglass deal. I didn't want to waste any juice so I took it apart. But alas, the wick hole is extremely small! I made a 3mm wick, 5 wraps, 32 kanthal and it barely fit. Burnt hits. Oh no. I thought to myself this needs 2mm. But I had an idea. I read on here that the evod heads probably wouldn't work in the t4. I wanted to try it anyway. Iteworks! The genuine Kanger evod heads work fine in the t4. The clouds were plenty full.
Moral of the story. Trash the heads that come with the t4, use evod heads. Even stock they work great.
https://www.fasttech.com/products/1360400
The cliffs notes version.
When I got home l opened up the t4 and looked at the head. Meh. The wick looked like hell to me. Most likely a fiberglass deal. I didn't want to waste any juice so I took it apart. But alas, the wick hole is extremely small! I made a 3mm wick, 5 wraps, 32 kanthal and it barely fit. Burnt hits. Oh no. I thought to myself this needs 2mm. But I had an idea. I read on here that the evod heads probably wouldn't work in the t4. I wanted to try it anyway. Iteworks! The genuine Kanger evod heads work fine in the t4. The clouds were plenty full.
Moral of the story. Trash the heads that come with the t4, use evod heads. Even stock they work great.
I've recently received a 5 pack of these. I love how much they hold, and so far none are leaking or playing up.
However, I do get that same unpleasant "metallic" taste that i get from the fasttech EVODS. Am i right in thinking that if I order some genuine Kanger EVOD heads, i can use them in the fasttech T4?
Presumably that would eliminate the bad taste.
However, I do get that same unpleasant "metallic" taste that i get from the fasttech EVODS. Am i right in thinking that if I order some genuine Kanger EVOD heads, i can use them in the fasttech T4?
Presumably that would eliminate the bad taste.
- Status
Similar threads
