After about 2 weeks of heavy use on my joye 510 atty, one day it just barely worked! Couldn't pull without sucking super hard, got a slightly burnt taste every toot, and minimal vapor.
My steps:
1) blow out all the liquid (not from battery end)
2) dry burn it (im using ego battery), i pulsed for 1-2 seconds on and off (don't get it too hot!)
3) get some isopropyl alcohol and let your atty sit for 5-10 minutes, pick it up while doing this and mix it around in the alcohol, ocassionaly blow through the open end (not battery end) to force liquid stuck inside through!
4) take a syringe (with or without neadle) and push alcohol through the atty
5) take distilled hot water, and repeat steps #3, and #4 with the distilled hot water instead of alcohol
6) let dry overnight
7) prime it without about 6 drops and start vaping away!
I can only say, this works; and this works great!
Moderator please move to e-cig matinence section! Thanks!
My steps:
1) blow out all the liquid (not from battery end)
2) dry burn it (im using ego battery), i pulsed for 1-2 seconds on and off (don't get it too hot!)
3) get some isopropyl alcohol and let your atty sit for 5-10 minutes, pick it up while doing this and mix it around in the alcohol, ocassionaly blow through the open end (not battery end) to force liquid stuck inside through!
4) take a syringe (with or without neadle) and push alcohol through the atty
5) take distilled hot water, and repeat steps #3, and #4 with the distilled hot water instead of alcohol
6) let dry overnight
7) prime it without about 6 drops and start vaping away!
I can only say, this works; and this works great!
Moderator please move to e-cig matinence section! Thanks!
Last edited:
