Just recently my firing button on the nzonic v2 has been getting stuck basically keeping it on. id have to uncrew the bottom in order for it to unlock the firing button. Has anyone else had this problem who owns a nzonic. any insight or tips will be greatly appreciated!
Firing button getting stuck on my nzonic v2
- Thread starter J.DLUX
- Start date
- th_trl_thread_readers 0
- Status
mine does that too. 2 things i would check for:
1) make sure the spring is not hanging up between the locking section and the magnet section
2) make sure the white delrin is screwed down all the way.
Until you find a fix for the problem, be sure to remove your battery. You don't want to over-discharge the battery causing it to hard short and go into thermal runaway. I had this happen to the fire button in a mech mod over a year ago. Not a fun thing to happen.
I've since stopped using protected Trustfires and now using AW IMR's in all of my mods.
I've since stopped using protected Trustfires and now using AW IMR's in all of my mods.
Thank you for the response...but i dont think my nzonic had a spring or a white delrin w/ it. would you be able to take a picture of how your nzonic breaks down. i actalluy bought this used. so i wasnt sure what was suppose to come w/ it. thanks again
- Status
