As the title says, this is my first attempt at building a coil using a cotton wick. Twisted 34ga kanthal, 2.2ohms and built on a black nimbus clone. Would love to get some feedback since the performance seems a bit underwhelming compared to my genesis builds with similar specs. It takes about 2 seconds after firing to start producing vapor and the flavor and TH are pretty muted. I have some suspicions as to what might be wrong (too much cotton, too large coil I.D., possibly over-saturated with juice, should be using thicker wire) but would love to get some input from people with experience doing cotton builds. For now I'm running it on my Evic @ 8.5W but the intent is for it to go on my Kato Hammer clone with the purple 700mAH Efest battery (rated for 10.5A). Not terribly interested in cloud chasing or sub-ohming but a respectable amount of vapor is always nice and in the future I might think about going down to the .7ohm range. For now while I'm learning I want to stay above 1.5 (1.3 minimum) ohms. Thanks in advance.
