Sounds like you're in good shape! Next, try it with the bed and cotton in the center also. Half the fun of building is figuring out what works best for your unit and your particular taste! Congrats, there is nothing like a dense cloud with great flavor!
First rda Igo L, tips on my coil building
- Thread starter Clockwood92
- Start date
- th_trl_thread_readers 0
- Status
do about 9 wraps of of that 30 ga around a 5/32 drill bit , wick with cotton puff balls or my favorite peaches and creme yarn from walmart (boil for 15 minutes before use).
Drill your air hole out as well. if you just want lung hits and big clouds use the 5/32 drill bite and that will do the job. if not just drill in little steps until you find what you like.
this set up will put out about the same clouds as a .7ohm micro coil on a mech mod.
Drill your air hole out as well. if you just want lung hits and big clouds use the 5/32 drill bite and that will do the job. if not just drill in little steps until you find what you like.
this set up will put out about the same clouds as a .7ohm micro coil on a mech mod.
I have been just enjoying mine with a single coil wrapped on 32 gauge kanthal. I want to try cotton because of all the good things I have heard but not till I use up my silica. Good luck to ya.
I do not mean to pass this off as fact by any means, but IMO and my experience I do not get the same flavor/throat hit/vapor production from anything that is not sub-ohm. I have had my experience with first rebuilding my protank 2, then rba's in the 1. to 2. range, and finally had the best experience with everything I wanted .2 to .7 depending on what I am building on and with. And have been doing so for the last 9+ months and have not looked back.
Thanks for all the posts guys! I'm thinking my next step is to start messing with a mechanical to get this sub ohm going. Iv seen some great looking builds with dual coils running around .3-.8 ohms. Any recommendations for a mechanical to try? Iv only messed with regulated mods so far, I have my lavatube 2.5 and an itaste vv. loving the cotton though guys, super clean taste and very easy to just change out a wick.
Just looking for Another rda to mess around with, loving my igo l but wouldn't mind trying something new to see the differences. Gunna try on a mechanical probably
I think you should look into a mechanical before you look into a different RDA. It'll completely change your experience when sub ohms are involved.
Depends if you want to go the clone route or authentic route. IMO clones can hit just as hard as the real deal, and are alot cheaper, but you are not supporting the original creator and their company. Dunno that is your moral standpoint to face. That being said some great mechs out there would have to be nemesis, stingray, chi u, king, caravella, vanilla, manhattan and I could add to the list. Find what you like. I find very small differences in between them all with performance generally. As for your igo, you want to get something better or upgrade it itself?
Thanks for all the suggestions. As for the igo, I'd like something to try different all together. May go the clone route as iv seen authentics are crazy expensive.
I've got no problems buying a clone. I have Patriot 1:1 clone and it works just as a good as the vape shops' owners original.
Last edited:
I personally own both clones, as well as originals for both mods and atty's and have yet to see a major difference as far as performance. If that's the case and you want clone, I personally love the tohb. They have a clone on fasttek that my buddy picked up, other than the serial number and price tag, I can't tell it apart from my authentic. It hits like a train, large holes for larger gauge kanthal, and has a beast look, is 22 mm so it will be flush with most mods.
So I just ordered a nemesis clone and a trident v2 clone to start messing around with. From what iv read these are pretty good for what I paid. Looking forward to some dual coil action
- Status
Similar threads
