Fluxomizer & Battery combo

Status
Not open for further replies.

NoMoCigy

New Member
Feb 4, 2012
2
0
54
St Louis

Sicarius

Super Member
ECF Veteran
Verified Member
Nov 30, 2011
679
239
NZ
The battery is a 1300maH and this is its capacity (ohms has nothing to do with it ... yet)

The Fluxomizer range you got there will work, but my recommendation would be for the GotVapes FLüXomizer™ DeLuXe CLEAR KR808 XL 1.8ml 2.6-2.8ohm. They have the smokey tanks and don't crack.

The ohms rating determines the amount of power the Fluxomizer will use (lower ohms ... more vapour).

Any reason you going for 808 and not 510 ?
 

Traver

Ultra Member
Supporting Member
ECF Veteran
Oct 28, 2010
1,822
662
WV
Ohms refers to the resistance of the cartomizer. The batteries are measured in volts and millamps. More millamps will make the battery last long and and give it the ability to deliver more power to the carto.

It works like this:
The more power a battery sends to the coil the more juice that can be vaporized.
power = watts
More volts = more watts = more hit and vapor.
Lower ohms = more watts = more hit and vapor.

Using more watts will also drain your battery faster.

With the same voltage you will get a lot more hit and smoke with a 2.0 ohm cartomizer than with a 3.0 ohm cartomizer. To say a battery gives good smoke and hit doesn't really mean anything. It is the combination of battery votlage and cartomizer ohms that matters.
 
Status
Not open for further replies.

Users who are viewing this thread