Focalecig chat...Part 2

[Burnie]

I've ordered quite a bit from MBV and they've always shipped really fast. Their juices usually taste much better after a couple of weeks (at least the flavors I've tried so far). If you like the Hazelnut Coffee, try the Caramel Coffee. I also ordered Honey Dew, Pear, Strawberry shortcake and Moo juice on my last order. I've been mixing Honey Dew and Pear with a few drops of Moo juice.

I've tried a few different vendors and some have strong chemical or perfume smells from their juice. I've always gone back to MBV.

Thanks.
I found the strong chemical or perfume smells to be a turn off from a LOT of venders, so I started DIY, but needed a change. Ordered some from MBV and Nicoticket (lots of good reviews on both), both seem to be good juice, no strong chemical or perfume smells, but do need steeped. But I am not partial to sweet/fruit juice, so my selection is limited.

Burnie

 

[Nikkita6]

Is it me or does the KF4 today on FC look like it has poor machining. I looked at it and figured that wasn't the Robbot one.

I didn't really look at the pics closely, just clicked on it briefly and noticed it had a cloned box .. I will look at it again

 

[inswva]

FLASH UPDATE: I have not ordered a single thing from FC in 7 days! One entire week! Not sure I can say when that last happened.

I do have three orders on the way and one still "collecting". My brass SMPL should be here tomorrow. Still waiting for a copper Slug, IN'AX Nano, and Dimitri.

 

[roxynoodle]

I didn't really look at the pics closely, just clicked on it briefly and noticed it had a cloned box .. I will look at it again

Thanks. I'm borderline needing reading glasses right now The lowest ones feel too strong yet, but without them, some things are hard to read/study. I'm having fun getting coils through post holes right now. Need one of those lighted magnifiers that sits on the table.

 

[Nikkita6]

I didn't really look at the pics closely, just clicked on it briefly and noticed it had a cloned box .. I will look at it again

I dunno, it was hard to tell because I don't have a good one to compare it to I tried comparing to the FT's two red oring versions but I couldn't quite pin point if this is FT's cheap one or $25 one.

I know the Robbot version better not be janky

 

[KTMRider]

Thanks.
I found the strong chemical or perfume smells to be a turn off from a LOT of venders, so I started DIY, but needed a change. Ordered some from MBV and Nicoticket (lots of good reviews on both), both seem to be good juice, no strong chemical or perfume smells, but do need steeped. But I am not partial to sweet/fruit juice, so my selection is limited.

Burnie

I wasn't much into sweet juices until a few months ago when I bought a KFL+ at my local b&m and they offered a free 15ml bottle but they only had sweet flavors. I found it's easier not to think about smoking when I don't have tobacco flavored juices which I used to love.

 

[Pclarity]

FLASH UPDATE: I have not ordered a single thing from FC in 7 days! One entire week! Not sure I can say when that last happened.

I do have three orders on the way and one still "collecting". My brass SMPL should be here tomorrow. Still waiting for a copper Slug, IN'AX Nano, and Dimitri.

I haven't ordered ANYTHING since you posted about the Venturi, which I ordered along with an N22. Should get here tomorrow.

 

[hobbes4]

I'm very curious to see the Robbot vs EhPro Kayfun V4. Almost joined a group buy for the Ehpro on Facebook but spent too much lately with Atmistique. May have to sit it out a bit until the reviews.

I built the "authentic" aqua yesterday with a simple single coil at 1.3 ohm just see how it vapes. So far it's okay but the flavor isn't that great. Gonna have to play with different builds to see what works best. The machining is excellent and I love the juice/AFC feature. No dry hits and no leaks. With the right build I think it will be excellent.

 

[Nikkita6]

I'm very curious to see the Robbot vs EhPro Kayfun V4. Almost joined a group buy for the Ehpro on Facebook but spent too much lately with Atmistique. May have to sit it out a bit until the reviews.

I built the "authentic" aqua yesterday with a simple single coil at 1.3 ohm just see how it vapes. So far it's okay but the flavor isn't that great. Gonna have to play with different builds to see what works best. The machining is excellent and I love the juice/AFC feature. No dry hits and no leaks. With the right build I think it will be excellent.

I didn't know that EHpro was cloning the Kayfun V4, but I am not surprised either .. Doris just confirmed that they received the Robbot 1:1 Kayfun V4 today, so it will be listed as soon as they take pictures .. which makes me afraid

I asked her to please encourage her products dept to take nice photos of it .. I am guessing that I would have mine from Robbot by Wednesday, Sylvia told me FB to stop crying because she sent it .. but she didn't tell me which day DHL usually takes 3 days though ..

You are now the second person who is saying that the "authentic" Aqua is not hitting it for you .. which surprises I think the vape is great, and I even put in my review that I have not heard a single negative feedback, and then bam! Today two people say their vape is not that great ... Well, maybe you two shouldn't have gone for the "authentic" .. teasing ... kinda

The Tobeco Aqua V2 is damn good vape, and I have witnesses

 

[hobbes4]

I didn't know that EHpro was cloning the Kayfun V4, but I am not surprised either .. Doris just confirmed that they received the Robbot 1:1 Kayfun V4 today, so it will be listed as soon as they take pictures .. which makes me afraid

I asked her to please encourage her products dept to take nice photos of it .. I am guessing that I would have mine from Robbot by Wednesday, Sylvia told me FB to stop crying because she sent it .. but she didn't tell me which day DHL usually takes 3 days though ..

You are now the second person who is saying that the "authentic" Aqua is not hitting it for you .. which surprises I think the vape is great, and I even put in my review that I have not heard a single negative feedback, and then bam! Today two people say their vape is not that great ... Well, maybe you two shouldn't have gone for the "authentic" .. teasing ... kinda

The Tobeco Aqua V2 is damn good vape, and I have witnesses

Do you know if the Robbot is 304 or 316ss?

I think it's just my build in the Aqua, need to play with it a little more. The wicking and airflow works great. I can't imagine the chimney being so drastically different on the Tobecco that it effects the flavor that much.

 

[Nikkita6]

Do you know if the Robbot is 304 or 316ss?

I think it's just my build in the Aqua, need to play with it a little more. The wicking and airflow works great. I can't imagine the chimney being so drastically different on the Tobecco that it effects the flavor that much.

Not sure on that one, but I just got finished picking the Bird's brain to see what her impressions of the Robbot KF4 is ...

[10:48:00 PM] Nicole Lea: How does the quality feel and look?
[10:49:46 PM] Doris@FocalEcig: I have compared it by the look with the one we listed yesterday.It is more exquisite
[10:49:56 PM] Nicole Lea: Ok that is good
[10:52:45 PM] Nicole Lea: Does it feel solid and beefy?
[10:54:40 PM] Doris@FocalEcig: It feels solid but i am not sure the feeling of beefy (wasntme)
[10:54:50 PM] Nicole Lea: (rofl)
[10:55:24 PM] Doris@FocalEcig: Yes, it feels something like a strong man
[10:55:34 PM] Nicole Lea: (y)
[10:55:41 PM] Nicole Lea: (kiss)


As for the Aqua, I wouldn't be so sure they are not slightly different. Only reason I say this is that yours from FT is a clone of the first batch shark, Tobeco cloned the 2nd batch dolphin, so how do we know that Footoon didn't make minor tweaks between batches? I am not saying they did, I am just saying its at least possible. Its not uncommon for modder to tweak between batches. Maybe the juice flow holes are smaller??

 

[roxynoodle]

I love my "authentic" Aquav2 . I've been vaping the hell out of it

 

[Nikkita6]

FLASH UPDATE: I have not ordered a single thing from FC in 7 days! One entire week! Not sure I can say when that last happened.

I do have three orders on the way and one still "collecting". My brass SMPL should be here tomorrow. Still waiting for a copper Slug, IN'AX Nano, and Dimitri.

My Dimitri just shipped and I also just remembered that there is not tracking for my IN'AX nano ... which I forgot about until I went to check tracking

I have a good amount of stuff coming for the Holidays .. IN'AX nano, Dimitri, Dopvo dual mech, Praxis SS and Black, Kayfun V4 (Robbot and Tobeco), Yihi Sxmini, Kanger subtank, Vapor Flask V2, Kayfun Bell cap, Taifun GT-S, and and and .. whatever other stuff I plan on buying on Christmas day, which is a tradition

But after this I am done, for a long time ... of course I will make an exception for anything exceptional

 

[Nikkita6]

I love my "authentic" Aquav2 . I've been vaping the hell out of it

Well since you have the same one hun, I think you should show the boys how its done. ;-)

 

[Pclarity]

Vape Porn!

The Aris all coiled up and ready to go.



Sitting up on the IPV Mini.



And she vapes quite nicely. It's a very interesting little atty. I'm having to readjust to low cloud production, but the flavor is SO worth it.

The only negative is it gets hot quickly. Been vaping at .7 & .9 ohms for the past two days. The first build was vertical, but these coils vape much better. I'm still finding its sweet spot.

In other news, Eleven offered to let me keep the second Origen Genesis they sent me by mistake for 10% off. I figure that was less annoying than shipping it back, so there you go. Hopefully I'll see my missing Mini in a couple weeks or so. So last batch of FC orders all complete once the Mini gets here. Once I get the N22, the Venturi, the Cloupor Mini, and some ss mesh, I should be done until spring...maybe...

 

[roxynoodle]

Well, I went straight for duals on the Aquav2. From a review I saw the deck will flood if you don't have wick on the non coiled side. The post holes are pretty small so I went with 28 gauge, 8 wraps each on 3/32" bits for 0.8ohm total resistance. Wicked like the Erlkonigin but with longer tails to the bottoms of the threads, and big "shoulders" at the top of the deck. Also trimmed the shoulders to fit the curve of the deck so they can't be moved by the chimney. Airflow/juice control a bit more than half open is giving me good flavor. I'm all about the flavor, not the biggest clouds.

 

[dragoi90]

The kayfun v4 by robbottech is 5.42!I don't beleive the price is real!Anyway i bought one!Let's hope for a great quality!

Sent from USS Intrepid NCC-1631

 

[inswva]

The kayfun v4 by robbottech is 5.42!I don't beleive the price is real!Anyway i bought one!Let's hope for a great quality!

Sent from USS Intrepid NCC-1631

I suspect any orders at that price will likely be cancelled. I'm guessing there is a "2" missing from the price.

 

[dragoi90]

It's been there for over 2 hours!It's even at the 10$ gadgets with that price!

Sent from USS Intrepid NCC-1631

 

[inswva]

It's been there for over 2 hours!It's even at the 10$ gadgets with that price!

Sent from USS Intrepid NCC-1631

Now listed as "sold out".