Focalecig chat...Part 2

Status
Not open for further replies.

The.Drifter

Ultra Member
ECF Veteran
Nov 20, 2013
1,673
13,340
Virginia
Hi Everyone :) Got my Robbot Kayfun4 in yesterday along with some other goodies from FC ;)

First impression is WOW ! I can believe that this was less that $30. The machining on my version is pretty good. I very pleased with this for the price point.

f9rxrbfyo7oey1j6g.jpg


Came in pretty clean, but I disassembled all the parts for a good cleanout anyways.

Had a chance to play around with some of the different tank options, like having all the choices in one box.

Shot of it on my Robbot ZNA with the full SS tank section:
222l30p5v5dvz6b6g.jpg


One this the Glass Mid section:
yj6zgz1u0et54ly6g.jpg


And here is my favorite setup, full clear tank:
8c1g19z4irg9lh46g.jpg


Built a 1 ohm coil with 26G, not the best choice for wire in this device, wire is way too thick to be grabbed by the little deck screws, but I finally managed to get it in. I think 30, or 32 G wire will work better on my next build.

Little learning curve with the juice control, managed to leak out 3 mil due to my ignorance with this KF4, but I think I finally figured it out. Vape quality isnt bad, on par with the older versions of the Kayfuns. Pretty decent flavor too. So Im pleased with it for now ;)

Rocking it on my Sigeli 100W+ today here at work:
kakkf45j0m87p9a6g.jpg
 

bsoplinger

Vaping Master
ECF Veteran
Verified Member
Apr 13, 2010
3,268
3,709
Capitol District New York
Does anyone have a simple explanation of how the Kayfun V4 juice control works? I downloaded the official instructions and parts diagram. Wasn't too helpful. Tried the huge thread here but all the numbers just made my head hurt. There's got to be a human explanation of these things.

Sent from my Samsung Galaxy Tab S 8.4 using Xparent Purple Tapatalk 2
 

The.Drifter

Ultra Member
ECF Veteran
Nov 20, 2013
1,673
13,340
Virginia
Does anyone have a simple explanation of how the Kayfun V4 juice control works? I downloaded the official instructions and parts diagram. Wasn't too helpful. Tried the huge thread here but all the numbers just made my head hurt. There's got to be a human explanation of these things.

Sent from my Samsung Galaxy Tab S 8.4 using Xparent Purple Tapatalk 2

Kinda works like turning on and off a faucet. Turn it clockwise to open it up and turn it counterclockwise to shut if off.
 

Nikkita6

Vaping Master
ECF Veteran
Verified Member
Oct 7, 2011
8,970
18,956
New York
nice nikki :) have you heard any chatter about a clone XS tank? on alibaba it looks like the "XS" has indeed been cloned, I could be wrong though.

While Limwell did copy and paste the XS tank option in their specs, they didn't mention it to me specifically, but I can ask. :)
 

Nikkita6

Vaping Master
ECF Veteran
Verified Member
Oct 7, 2011
8,970
18,956
New York
Hi Everyone :) Got my Robbot Kayfun4 in yesterday along with some other goodies from FC ;)

First impression is WOW ! I can believe that this was less that $30. The machining on my version is pretty good. I very pleased with this for the price point.

f9rxrbfyo7oey1j6g.jpg


Came in pretty clean, but I disassembled all the parts for a good cleanout anyways.

Had a chance to play around with some of the different tank options, like having all the choices in one box.


And here is my favorite setup, full clear tank:
8c1g19z4irg9lh46g.jpg


Built a 1 ohm coil with 26G, not the best choice for wire in this device, wire is way too thick to be grabbed by the little deck screws, but I finally managed to get it in. I think 30, or 32 G wire will work better on my next build.

Little learning curve with the juice control, managed to leak out 3 mil due to my ignorance with this KF4, but I think I finally figured it out. Vape quality isnt bad, on par with the older versions of the Kayfuns. Pretty decent flavor too. So Im pleased with it for now ;)

Rocking it on my Sigeli 100W+ today here at work:
kakkf45j0m87p9a6g.jpg


Nice Drifter :) Hun you don't need to go to 30 or 32 gauge though, I built mine with 27 gauge without issue. You will need to do a full wrap around the catch though, so 28 gauge should be a breeze. ;-)
 

Nikkita6

Vaping Master
ECF Veteran
Verified Member
Oct 7, 2011
8,970
18,956
New York
I love both of these shots hun, but the first is stellar :thumb: But ... unfortunately you will need to bring your text up to the center of the photo so it can be read on the slider. You will need a header photo and thumbnail (2:1 800x400 or 600x300) I usually crop my header photo to make the thumbnail.

I know it sucks to place text dead center of a great photo (makes me cry :p) but here is what I would do. Add review text at the center of the 2nd photo and use this for your header, then crop around the text (2:1) for the thumbnail. Then remove the text from the first photo and use that as a final photo ... Now I know this advice is very "Nikki-esque" but I think the 2nd photo is the better header photo, and the first is the closer :)

Both photos are great, but I especially like the first one :wub: Now don't have to take my advice about which photo to use where, but you will definitely have to move the text up to the center, unless .. you make a separate text laid thumbnail, then you can leave the first photo with text as it is. :)

Trying to tighten up my vape porn game a little. Here are a couple of sneak peek shots from the upcoming Ivogo Dimitri review...

OgCEb8.jpg


CGnmoB.jpg
 

Nikkita6

Vaping Master
ECF Veteran
Verified Member
Oct 7, 2011
8,970
18,956
New York
Well .. you could just read my Kayfun V4 review. But as Drifter said its like a faucet, there really isn't a in between, you turn it on to vape, and turn it completely off to refill.

Does anyone have a simple explanation of how the Kayfun V4 juice control works? I downloaded the official instructions and parts diagram. Wasn't too helpful. Tried the huge thread here but all the numbers just made my head hurt. There's got to be a human explanation of these things.

Sent from my Samsung Galaxy Tab S 8.4 using Xparent Purple Tapatalk 2
 

inswva

Do you even squonk, bro?
ECF Veteran
Verified Member
Jul 19, 2014
4,728
18,512
I love both of these shots hun, but the first is stellar :thumb: But ... unfortunately you will need to bring your text up to the center of the photo so it can be read on the slider. You will need a header photo and thumbnail (2:1 800x400 or 600x300) I usually crop my header photo to make the thumbnail.

I know it sucks to place text dead center of a great photo (makes me cry :p) but here is what I would do. Add review text at the center of the 2nd photo and use this for your header, then crop around the text (2:1) for the thumbnail. Then remove the text from the first photo and use that as a final photo ... Now I know this advice is very "Nikki-esque" but I think the 2nd photo is the better header photo, and the first is the closer :)

Both photos are great, but I especially like the first one :wub: Now don't have to take my advice about which photo to use where, but you will definitely have to move the text up to the center, unless .. you make a separate text laid thumbnail, then you can leave the first photo with text as it is. :)

Fantastic advice, thank you! I need to get this nailed down pretty quickly. I'd be stupid not to heed the advice of the master. :)
 

rhelton

Vaping Master
ECF Veteran
Verified Member
Aug 15, 2014
4,161
15,514
spokane, wa
I'm eating on my buddy Doris to get the subtank mini. I'd stop boycotting Kanger for that. ;)


Sounds good, I dont want to pre-order so ill be looking for FC to get them. Why those tards did not release a 22 and the other one a 28 or 30. Thats another thing I dont understand, why cant the 26650 people get together on what size they gonna build. I'd have one but you dont know what size to get.
 

Crocky

Ultra Member
ECF Veteran
Verified Member
Mar 14, 2013
1,752
2,280
North Carolina
I love both of these shots hun, but the first is stellar :thumb: But ... unfortunately you will need to bring your text up to the center of the photo so it can be read on the slider. You will need a header photo and thumbnail (2:1 800x400 or 600x300) I usually crop my header photo to make the thumbnail.

I know it sucks to place text dead center of a great photo (makes me cry :p) but here is what I would do. Add review text at the center of the 2nd photo and use this for your header, then crop around the text (2:1) for the thumbnail. Then remove the text from the first photo and use that as a final photo ... Now I know this advice is very "Nikki-esque" but I think the 2nd photo is the better header photo, and the first is the closer :)

Both photos are great, but I especially like the first one :wub: Now don't have to take my advice about which photo to use where, but you will definitely have to move the text up to the center, unless .. you make a separate text laid thumbnail, then you can leave the first photo with text as it is. :)

Um does FC sale bulk Advil :blink:
 

AnsonJames

Ultra Member
ECF Veteran
Verified Member
Jun 23, 2011
1,855
2,239
IRELAND
Yes hun, they do have logos :) I will post pics when it arrives, I just checked my tracking and it sys that it was just picked up in HK today :glare: I had hoped I would have it by Friday, but its looking like Monday based on tracking.

Thank you my dear - ordered one from Focal today, now the waiting game begins.
Really looking forward to this one.
 

bsoplinger

Vaping Master
ECF Veteran
Verified Member
Apr 13, 2010
3,268
3,709
Capitol District New York
Still stuck on the Kayfun V4 juice control. When I hold the bottom part, up to and including the squared off bit with an air hole on each side, and twist nothing seems to happen other than my unscrewing the outer bell shaped chamber. I initially see more of the o-ring then the threading. I'm rather certain that isn't what's supposed to happen. I even checked out Nikkita6 review, didn't help at all. In fact I couldn't see a difference between the open and closed version pictures.

Maybe there's a YouTube video out there that shows what to do. I'd appreciate if someone could point me to it.

Sent from my Samsung Galaxy Tab S 8.4 using Xparent Purple Tapatalk 2
 

Nailz

Vaping Master
ECF Veteran
Verified Member
  • Jun 6, 2013
    6,582
    30,401
    Wichita, KS
    Still stuck on the Kayfun V4 juice control. When I hold the bottom part, up to and including the squared off bit with an air hole on each side, and twist nothing seems to happen other than my unscrewing the outer bell shaped chamber. I initially see more of the o-ring then the threading. I'm rather certain that isn't what's supposed to happen. I even checked out Nikkita6 review, didn't help at all. In fact I couldn't see a difference between the open and closed version pictures.

    Maybe there's a YouTube video out there that shows what to do. I'd appreciate if someone could point me to it.

    Sent from my Samsung Galaxy Tab S 8.4 using Xparent Purple Tapatalk 2

    Phil covers the juice control on the authentic in this video at the 12 minute mark, maybe that will help you out.

     

    Nikkita6

    Vaping Master
    ECF Veteran
    Verified Member
    Oct 7, 2011
    8,970
    18,956
    New York
    Thank you my dear - ordered one from Focal today, now the waiting game begins.
    Really looking forward to this one.

    You're welcome hun :) I am soooo looking forward to it too, although it looks like I won't see mine until Monday. But it could be worse, so I should shut up now :laugh: Looks great in the photos though :banana:
     

    Nikkita6

    Vaping Master
    ECF Veteran
    Verified Member
    Oct 7, 2011
    8,970
    18,956
    New York
    Important Spam Alert from USPS.com .. there are fraudulent emails in circulation claiming to be in regards to tracking, and shipment but contain link to malicious viral software that is capable of stealing your personal information when clicked.

    So for all of you chronic tracking # stalker, BE AWRE! https://postalinspectors.uspis.gov/radDocs/consumer/SpamAlert.pdf
     
    Status
    Not open for further replies.

    Users who are viewing this thread