Found a great atomizer for 6 volt vaping

[portguy]

So the first ecig i bought was a Nucig AP2 kit. As a whole it is a CRAP. In fact as a real newbie that had not found any info on vaping it took me a few hours to know that sucked. Since then i never picked up that super mini. Till this day. I was running out of HV atties and wanted to have a 6 volt vaping day. I remembered that i had 6 new atties from that crappy kit.

These little guys turned out to be work horses at 6 Volts. I mean...if you give a regular 510 atty a 15 second hit it will probably pop... Being the same thread as the 510 i tried it (dunno why i didnt remember that before). Well: i vaped all day on this little sucker. It can take a 15 sec hit at 6 volts without any problem! I mean...it does not even glow!

Oh..make that a 30 second hit...just tried it.

P.S. The atty is a dse084

 

[quasimod]

I might have to try one of those, does anyone reccommend a good source for them?

 

[doots]

So the first ecig i bought was a Nucig AP2 kit. As a whole it is a CRAP. In fact as a real newbie that had not found any info on vaping it took me a few hours to know that sucked. Since then i never picked up that super mini. Till this day. I was running out of HV atties and wanted to have a 6 volt vaping day. I remembered that i had 6 new atties from that crappy kit.

These little guys turned out to be work horses at 6 Volts. I mean...if you give a regular 510 atty a 15 second hit it will probably pop... Being the same thread as the 510 i tried it (dunno why i didnt remember that before). Well: i vaped all day on this little sucker. It can take a 15 sec hit at 6 volts without any problem! I mean...it does not even glow!

Oh..make that a 30 second hit...just tried it.

P.S. The atty is a dse084

My Gosh, can you really take a 30 second hit off of 6v and live to tell about it? lol

 

[portguy]

Im not taking the hit. The atty is. I just tried to pop it...might take a minute hit just to see what happens....

BTW...the atty is not a dse084. It has 4 threads instead of three.

BUT...it is exactly the same model as barlites.

Barlites Replacement Atomizer

Here's a pic

I will keep reporting the atty life. Also im gonna try and get a multimeter to check this midget.

Oh...and it makes the GGTS shorter. The atty and moutpiece inserted are the same size as a 510 cart.

 

[portguy]

Ok..update. After 1 minute glowing RED HOT this thing works like a beast. My whole GGTS is very warm and the litlle sucker is ALIVE. In fact the GGTS is warmer than the atty after 15 seconds....WOW.
This might be a damned good atty for HV vaping.

 

[portguy]

Ok...i could not resist this. Crappy video made with my cell phone.

Watch the midget take the hit (not me...the atty).
YouTube - MMMM

 

[doots]

looks great port. thanks for sharing this and the link..

does anyone know what model this is?

 

[sanfordf]

Hi Doots. I think this might be it: Electric Cigarette - NUCIG ™ Electronic Cigarettes or http://www.nucig.co.uk/product_p/ec84atm01.htm

Not sure which one, maybe PORTGUY could help.

 

[portguy]

Yes it is the nucig ap2. Can't point the model in general but it looks like a modification of the dse084. Also the barlites is the same as the nucig ap2, but cheaper... The atty is exactly the same.
These atties differ from the 084 but i think the 084 will act pretty much the same.
Also the RN4081 is used on the Copper and recommended by liberty-flights for 6 volt vaping.
I think these attys are great for higher voltages due to their completely exposed bridge.

From all super mini attys this one is easy to tell apart. The atty's center connection to the battery protrudes instead of being recessed.

 

[Chrissie]

Wow that really is amazing

My first e-cig was a RN4081 & in 6 months of using that I only owned 3 atties & only killed one of them. OK that was just using them on a 4081 batt but I do think the super-mini atties are far more durable than others. Goes off to search for those 2 remaining very old atties.......

 

[D133]

Thanks for the tip.
I have some DSE084 atomisers so I just tried one using my Slim (not HV perhaps, but a lot more powerful than the small 084 batteries).
A 901 to 510 adapter was required, plus I needed to do the paperclip mod as the 084 atomiser is too short to make contact with centre pole in the adaptor.
Its good, lots of vapour! One thing though is that the 084 cart is tiny, I'm drying out the filler very quickly. I'm guessing the Nucig AP2 cart must be a lot bigger - unless you have found a way to effectively wick all the juice out. I might try a PTB in the cart.

Edit>> Ah, perhaps you are just dripping? Works well this way, but still burns up the juice very very fast, I'll try to get my cart to work.

 

[portguy]

D133,

The cart is slightly different than the 084 but the capacity is the same. The cart holds 13 drops, but all my carts have blue foam as this was the earlier mod i used. Im gonna try highping's cart mod on this.

I will use these mainly at 6 volts. Just tried it at 7,4 volts and it takes the hits nicely, but 7,4 is too harsh for me.

Im gonna see if these guys last... Any HV atty does not last me longer than a week, some actually last 1 or 2 days. If this atty lasts anything between 3 to 7 days it will be my 6 volt atty. I really feel that they will last pretty long. As you can see..after a minute at 6 volts it looks more like a soldering iron than an atty :=0

Now this atty is exactly like a 510 atty, connection wise (a 510 atty fits perfectly on that nucig ap2 crappy battery). The only difference is that the center pole on the atty sticks out like one milimeter. This is good coz it actually is center pole push proof!

 

[doots]

Hi Doots. I think this might be it: Electric Cigarette - NUCIG ™ Electronic Cigarettes or Electric Cigarette - NUCIG ™ Electronic Cigarettes

Not sure which one, maybe PORTGUY could help.

thank you.....

 

[harpo]

Are these the same as a 306 or 306a?

 

[cos]

Harpo i was just thinking same as you. sounds like a 306. is the atty exposed at all on this? if so then Harpo may be right. that 306 is a nice little atty. use mine all the time and great for dipping. anyway please someone has to know. i need this atty and wont be able to sleep til we find out .

 

[portguy]

It sure looks a lot like the 306 (or mini fogger) but this one i have is not even in diameter.
Last 2/3 of the atty (towards the battery connection) is wider. That is what actually seals the cart around the atty.

If anyone has a 306 just take a look at the battery connection on the atty. These ones have the center sticking out 1mm. 306 seem to be more like the 510.

 

[Brad524]

These are the same as the blu/volcano atties. They work great on a PT too and Volcano sells them pretty cheap with fast shipping from Hawaii to the east coast.

 

[leannebug]

Yes, these blu/volcano attys (not sure which is which, I have them both) have the last 1/3 of the atty (nearest the battery) extended a bit. They also fit the 510 battery.

Great to hear they are good on the 6v. Now I just have to get one!

 

[cos]

Yes, these blu/volcano attys (not sure which is which, I have them both) have the last 1/3 of the atty (nearest the battery) extended a bit. They also fit the 510 battery.

Great to hear they are good on the 6v. Now I just have to get one!

I would love to try one of these. where can you buy them. pm me with url as not to post another website here on Imeo forum.
I thought i heard talkinhg that we will be able to use any atty on the AFS v2 soon. am i correct on what i heard? this would be great. I mean i have Imeo i3 i6 attys but i do not care for 901. sorry Imeo i mean no offense to you just never been crazxy over 901 attys even before i came here. but i still use your i attys .
Cos

 

[portguy]

Update:

Atty gone to vaping heaven. As it undertook some serious testing will report the life of a new one.