Got it today, we'll see. Seems pretty good on first impressions. The ohms read the same on this as on my provari. The only thing that I'm not thrilled about is you have to remove 2 screws on the back to change the battery, I can live with that.
Found Hana DNA 30 Clone in stock too good to be true?
- Thread starter Jdbaker82
- Start date
- th_trl_thread_readers 0
- Status
Got it today, we'll see. Seems pretty good on first impressions. The ohms read the same on this as on my provari. The only thing that I'm not thrilled about is you have to remove 2 screws on the back to change the battery, I can live with that.
They will have the 30 watt any day now and a great price.
$52.00 HANA MODZ Pack DNA 20 Style Mod - 1*18650 / 7W-20W at FastTech - Worldwide Free Shipping
Just bought one from same place wetvapes TY for this post Jd. I have been looking like crazy now I have one On the way. Only had silver color left, but I wouldn't care if it was hot pink with purple stripes. Its aluminum if I get tired of the color I can always re-anodize it myself. I'm so looking forward to a 30W vape, hopefully it doesn't bust my heart lol.
Last edited:
I got a blue one, no logo, ohms read perfect. Running a dual coil, net .5 ohm coil Quasar RDA with JuiceMafia Highway4. This thing rips. Seriously amazing. I've read that this unit will only output a minimum of 4V but I find that to not be true. I am vaping between 13 and 15.5W, highest I've turned it up is 16.5. 13.3W at .5 ohm is reading an output of 2.5V on my unit and while that sounds like a low value, this setup produces so much more flavor and vapor than anything else I've ever had, it's not even close. It's a thick, heavy vape out of this guy whether I lung inhale or draw normally, with lung inhales being even more impressive. So far I've been vaping it all day at work and from a full charge, I'm down to about half left on a Panasonic 18650. Don't have specifics on the battery as I just bought it yesterday and it immediately went into the mod. Can't say enough good things about it. I got a blue one, for what it's worth.
Yeah, and..... You really only have to take the batteries out to replace them, not recharge them. You're not actually killing that many batteries, are you?
I'll knock out a VTC4 in 2 to 4 hours if I'm not careful, I go through 3ml of juice on my drive to work in the mornings.(just over an hour drive)
GEEZ that's 2 days vaping for me lol, I have managed to beat up 3ml in half a day dripping. I cant wait to get mine I have been vaping at 15W on my svd and vtr and want more warmth. will be cool to see how well it vapes higher ohms builds. My RDA's are between .19 and .4 ohms those run on my panzer and make enough vapor to Gag me on lung hits. Does yours seem to make Mech mod vapor??
Right now my 91% is at 1.1 ohms and I'm trying 16 watts, I get good vapor off of it not rda vapor but good vapor I use .3 nic and large lung hits
Awesome I'm a kayfun fan having there whole line up I vape those at 1.2 ohms and 15W great flavor and vapor cant wait to warm that vape up some more I vaped the kayfun at 20W in a buddies DNA 20 mod and wanted the DNA chip ever since. Can you tell if the chip is a clone as well. I don't care so long as it works like it should. If its not covered in epoxy Id like to see the build for that chip. I do a good bit of programming and was thinking of trying a build of my own.
No problem brother, I received my Clone today from wetvapes and its SMOOOKIN hot. I put it through its paces running the buttons in and out trying all my atomizers on the 510 connection cycled through the program gave it some testing vaping at 3.0 ohms and down to .2 ohms. Here is what I find.
First let me say it vapes fantastically. Button functions work as they should, program menus work as they should, Ohms checker dead on the money same as my fluke says it is. The programming for the chip wont allow it to read ohms lower then .3 on the display I even tried screwing a .13 atomizer on it just to see if it would read it and it still will only show .3 So that has to be set in the programming of the chip. I tried several coil builds .4, .5, .7, .9, 1.1, 1.5, 1.8, 2.0, 2.5 and 3.0 all read exactly as they should.
All in all its well worth the price and I got it in 2 days who could ask for any better then that. I haven't yet opened the seals to see if its a real DNA30 chip yet I will do that in a couple days I first want to make sure there are no hidden issues waiting to pop up.
,
First let me say it vapes fantastically. Button functions work as they should, program menus work as they should, Ohms checker dead on the money same as my fluke says it is. The programming for the chip wont allow it to read ohms lower then .3 on the display I even tried screwing a .13 atomizer on it just to see if it would read it and it still will only show .3 So that has to be set in the programming of the chip. I tried several coil builds .4, .5, .7, .9, 1.1, 1.5, 1.8, 2.0, 2.5 and 3.0 all read exactly as they should.
All in all its well worth the price and I got it in 2 days who could ask for any better then that. I haven't yet opened the seals to see if its a real DNA30 chip yet I will do that in a couple days I first want to make sure there are no hidden issues waiting to pop up.
,
Yeah, I made the mistake of putting in a pre-order with illvapes for a no-logo clone. And I've got a gut feeling that I'll never see it!
Good thing I decided to build myself a mod with an SX350 chipset, which is what I'm vaping on now, , otherwise I'd be a whole lot more aggravated!
Good thing I decided to build myself a mod with an SX350 chipset, which is what I'm vaping on now, , otherwise I'd be a whole lot more aggravated!
- Status
Similar threads
