FreeMax FireLuke Subohm tank

[PJReid]

Here are the new Freemax tanks.
Freemax NeutronStar Tank - EightVape
Freemax Firelord Sub-Ohm Tank W/ RTA Section - EightVape
And their first mod kit
Freemax Firelord Kit with Conqueror 80W TC Mod - EightVape

Sent from the future

You really are an enabler. I don't need any help with my out of control Shinyitus. I got my two Firelukes today - one black resin and one gold metal. I will post photos tomorrow. The black resin is especially stunning with all of the colors running through the black. I think I am in love. Maybe I will have better luck starting from scratch with installing coils. Wish me luck! I did order some drop in coils since the one that came with my first one has great flavor and those are always good to have on hand.

 

[PJReid]

Housecleaning, laundry, etc. today - not fun. Here are the photos of my new FireLuke tanks.

The lovely gold:

The black resin:

 

[Letitia]

Black is pretty. Can't order one since I just pre-ordered GeekVape Zeus RTA. I'm Can't believe I pre-ordered. Sigh.

 

[Tonee N]

Black is pretty. Can't order one since I just pre-ordered GeekVape Zeus RTA. I'm Can't believe I pre-ordered. Sigh.

You pre-ordered?
Are you feeling well?
Maybe you should go see a doctor.[emoji856]

Sent from the future

 

[PJReid]

Black is pretty. Can't order one since I just pre-ordered GeekVape Zeus RTA. I'm Can't believe I pre-ordered. Sigh.

The black resin is beautiful with all of those pretty swirly colors. I love it. The one that I decided to use the RBA deck with was the gold since purple and gold are so regal together. The black will look great on almost any mod, IMO. I hate the fact that the RBA deck requires a two coil build but I did it!!!! Wicked and working. It took so much longer than it should have because I am a little OCD about positioning. Then, my ohm meter wasn't getting a reading. I just didn't have the deck screwed tightly enough into the base of the atty. After I figured that out, the rest was pretty easy. Not as simple as coiling and wicking an OBS Engine Nano but I am sure it will get easier with practice.

 

[Letitia]

You pre-ordered?
Are you feeling well?
Maybe you should go see a doctor.[emoji856]

Sent from the future

But but it's so handsome. Single coil, top af and will look so good on Therion.

 

[Letitia]

The black resin is beautiful with all of those pretty swirly colors. I love it. The one that I decided to use the RBA deck with was the gold since purple and gold are so regal together. The black will look great on almost any mod, IMO. I hate the fact that the RBA deck requires a two coil build but I did it!!!! Wicked and working. It took so much longer than it should have because I am a little OCD about positioning. Then, my ohm meter wasn't getting a reading. I just didn't have the deck screwed tightly enough into the base of the atty. After I figured that out, the rest was pretty easy. Not as simple as coiling and wicking an OBS Engine Nano but I am sure it will get easier with practice.

You got this!

 

[PJReid]

The purple Minikin V2 and the gold Fireluke really do look positively regal together. Anna, come look. @stols001

 

[Tonee N]

But but it's so handsome. Single coil, top af and will look so good on Therion.

So would a Govad single coil RDA.[emoji106]

Sent from the future

 

[Letitia]

You have got to get a dt gold tip Pam. They do look great together. Again, where's the fish?

 

[Letitia]

So would a Govad single coil RDA.[emoji106]

Sent from the future

Where is the promised pic of black Ark?

 

[Tonee N]

Where is the promised pic of black Ark?

I ordered red/silver, changed the order, still received red/silver

Sent from the future

 

[PJReid]

You have got to get a dt gold tip Pam. They do look great together. Again, where's the fish?

I have a few gold dts on order from FT. The one that is on it now is black flecked with gold, so looks pretty nice in person. The photos don't really show how pretty it is but the gold will be better.

 

[Letitia]

I ordered red/silver, changed the order, still received red/silver

Sent from the future

Guess I saw it then. Saw your post in other thread. Sorry you missed out on black, know you were looking forward to having it. How do you like the tank?

 

[Tonee N]

Guess I saw it then. Saw your post in other thread. Sorry you missed out on black, know you were looking forward to having it. How do you like the tank?

I'll eventuality have the black.[emoji6]
The RDA is.....different.
NO SPITBACK whatsoever! It comes with Clamp style and Velocity style decks, lots of extra screws, orings, cotton, glass, and 4 flat claptons.
Bottom fixed airflow and middle adjustable airflow.

Sent from the future

 

[Letitia]

I have a few gold dts on order from FT. The one that is on it now is black flecked with gold, so looks pretty nice in person. The photos don't really show how pretty it is but the gold will be better.

Thought it was silver. That would look good. Any differences between resin and metal? Besides the obvious of course. (put that in there before Tonee N could pounce on it)

 

[Letitia]

I'll eventuality have the black.[emoji6]
The RDA is.....different.
NO SPITBACK whatsoever! It comes with Clamp style and Velocity style decks, lots of extra screws, orings, cotton, glass, and 4 flat claptons.
Bottom fixed airflow and middle adjustable airflow.

Sent from the future

Watched a review out of curiosity. Not my cup of tea, but for .99 I would've given it a shot too.

 

[Tonee N]

The Vaporesso Transformer RDA is very surprising. Picked it up for $17 from Urvapin. It can be built multiple ways and the airflow on the tall barrel is deceiving, it has ALOT of airflow!

Sent from the future

 

[Letitia]

The Vaporesso Transformer RDA

Just took a quick look. Love the profile with tall cap. How's it vape?

 

[Tonee N]

Just took a quick look. Love the profile with tall cap. How's it vape?

Like butter!

Sent from the future