Fused Clapton build

[Dan011z]

Hey guys I just bought fused clapton wire 32g kanthal wrapped around 2x 28g kanthals. I was wondering how much ohms I would get if I wrap this 6 times in 2.5 diameter. Just didnt want to waste wires by experimenting. Gonna build it sleeper style on my K24.

 

[SLIPPY_EEL]

It should be about 0.3ohms i would have thought

 

[Dan011z]

I see...so two would be 1.5?

 

[Bn0_Vapes]

I see...so two would be 1.5?

No duel should be about .3-.35

 

[SLIPPY_EEL]

I see...so two would be 1.5?

you said you were doing sleeper so i presumed you were doing a dual and the figure is based on that

 

[Dan011z]

I see. Thank you very much for the input. Really appreciate it

 

[SLIPPY_EEL]

but as Bn0_vapes said it may be a little towards 0.35 or similar as the clapton wrap makes the internal wire a bigger id than 2.5id if you know what i mean

 

[SLIPPY_EEL]

One coil would be about 0.7ohm

 

[SLIPPY_EEL]

I see. Thank you very much for the input. Really appreciate it

no problem

i do it like this-->Coil wrapping

 

[Bn0_Vapes]

you said you were doing sleeper so i presumed you were doing a dual and the figure is based on that

Oh my fault didn't see that you were gunna do a sleeper

 

[Dan011z]

no problem

i do it like this-->Coil wrapping

Wow that is good to know.
Thank you. Have it on book mark

 

[ErrrKT19]

Wow that is good to know.
Thank you. Have it on book mark

no problem

i do it like this-->Coil wrapping

then you'll love this Wire wizard

 

[SLIPPY_EEL]

then you'll love this Wire wizard

If you know how to use the wire wizard can you put his build into it so i can see how you did it, i did try using it and didnt get the result to marry up with the way i did it

 

[ErrrKT19]

If you know how to use the wire wizard can you put his build into it so i can see how you did it, i did try using it and didnt get the result to marry up with the way i did it

here's how i would go about it. just remember that when you get it all set up, it's just giving you resistance for a single coil. so for his build you would just divide the given resistance,
by number of coils, 2 to get the final build resistance.
or 0.747Ω/2 = 0.3735 Ω

 

[SLIPPY_EEL]

here's how i would go about it. just remember that when you get it all set up, it's just giving you resistance for a single coil. so for his build you would just divide the given resistance,
by number of coils, 2 to get the final build resistance.
or 0.747Ω/2 = 0.3735 Ω

Thankyou, @ErrrKT19 i thought i was able to get it to calculate the two coils hence why i didnt understand, now i know i will use it

 

[ErrrKT19]

Thankyou, @ErrrKT19 i thought i was able to get it to calculate the two coils hence why i didnt understand, now i know i will use it

glad to help!