Where did you get that super-mini drip tip? I like it.
This mod is dedicated to the GTUS explicitly, made from brass and walnut, and holds a 18650, a 4050 booster pod and uses a magnetic connection, although the 510 is still there. I drilled a 1.2mm hole in the brass positive post and bolted a 3/4" x 3/8" ring magnet to the bottom with the aid of a thin steel washer and a threaded ring cut from a 510 connector (my last one).
The pod is held in place by a short length of 5/8" brass tube with a slot cut out for the positive wire and is brought up to size with a Gummy tank tube that is 3/4" OD 5/8" ID (thanks buddy, I've used more than half of it now).
To maintain the airflow for the GTUS, a 4mm hole was drilled in the side of the mod and lined with a brass tube. The walnut is finished with linseed oil and beeswax so it should be quite juice resistant in the event of weeping. I also added an o-ring to the GTUS to raise the inlet about a mil, and when standing the inlet is at the highpoint in the chamber and should be less prone to anything escaping.
It works a charm, is much more compact now, and I particularly like the mini drip tip, so much so that I wouldn't want to replace SS tank and cover with Ghost Protocol parts now as the lines would be off.
Thanks for looking!
