G-Tank-US-CO-OP Support Thread - Part 2

[ime5000]

That kinda worked. But I think it started leaking and I had to do it every four or five hits. I'm gonna mess with it some more. I'll figure this out.

Sent from my HTC_Amaze_4G using Tapatalk 2

 

[sabre66]

Hi anybody dripping with this yet and if so can you post pictures of the setup?I'd like to try it

Thank You
paul

 

[debb]

I dripped in mine ..the only way I've used it so far...works great...I used the short top and my own dt...the wick was just inside my dt...so I didn't have to remove the dt..

 

[sabre66]

I dripped in mine ..the only way I've used it so far...works great...I used the short top and my own dt...the wick was just inside my dt...so I didn't have to remove the dt..

Well that was easy

 

[Youssefa]

Sabre your wish my command
Short and sweet.
Next time I think I will fold the nextel in half with the fluffy end facing down.

 

[sabre66]

Thank you Youssefa and debb

 

[ainako]

I used a 3/32 cobalt drill bit to open up the spike to accept wicks that are about 2mm thick, similar to my GenLV setup. Used an oring at the bottom to ensure the hole lines up between the posts. It is now my go to atty, the raised lip makes it a slight PITA to connect the negative but its worth it, using 32g kanthal and a 4/3 wrap.

 

[Scubabatdan]

I used a 3/32 cobalt drill bit to open up the spike to accept wicks that are about 2mm thick, similar to my GenLV setup. Used an oring at the bottom to ensure the hole lines up between the posts. It is now my go to atty, the raised lip makes it a slight PITA to connect the negative but its worth it, using 32g kanthal and a 4/3 wrap.

Initially there was no raised lip, but I noticed that I had more of a juice leak problem from the threads just sitting static. With the raised lip there is no more leaking through the threads sitting static unless severly flooded. Hope that explains the lip.
Dan

 

[jamesd1628]

Anyone using their GTUS on a Precise? I just traded for a P+18500 (not arrived yet). They do have the recessed connector, which I don't think will be a problem, I just thought I'd see if anyone has tried this combination.

 

[Scubabatdan]

Anyone using their GTUS on a Precise? I just traded for a P+18500 (not arrived yet). They do have the recessed connector, which I don't think will be a problem, I just thought I'd see if anyone has tried this combination.

Nope, waiting on some SS rods I ordered, working on a manual telesopic battery mod for the GTUS
Dan

 

[jamesd1628]

Nope, waiting on some SS rods I ordered, working on a manual telesopic battery mod for the GTUS
Dan

Sounds cool. Just what we all need, a battery mod to match the GTUS. Would love to see how you set up the switch.

 

[Krythis]

Why is there a rubber o-ring on the lower until in Youssefa's setup?

 

[asdaq]

Nope, waiting on some SS rods I ordered, working on a manual telesopic battery mod for the GTUS
Dan

This sounds familiar... a la Sturm mod for 18xxx batteries?

 

[goat29]

Nope, waiting on some SS rods I ordered, working on a manual telescopic battery mod for the GTUS
Dan

gee dan i hate to sound pushy but since you doing a mech mod anyway could you figure out how to use a kick in it pls?

 

[goat29]

gee dan i hate to sound pushy but since you doing a mech mod anyway could you figure out how to use a kick in it pls?

with using a 18650 bat

 

[Scubabatdan]

Here is a quick walk through on set up for those haveing a hard time seeing the setup process:

Dan

 

[MikeE3]

Here is a quick walk through on set up for those haveing a hard time seeing the setup process:

Dan

One pic missing for me , sorry. How much wick do you leave extending through the 'spike' when a.) using the 3/5ml tanks and b.) when using the eGo B-tank/tip? Or do you leave it as long as shown in the picture w/ the bottom assembled?

thanks

 

[MikeE3]

Why is there a rubber o-ring on the lower until in Youssefa's setup?

It allows you to snug the 2 bottom sections together so the air hole lines up with the wick.

 

[Scubabatdan]

One pic missing for me , sorry. How much wick do you leave extending through the 'spike' when a.) using the 3/5ml tanks and b.) when using the eGo B-tank/tip? Or do you leave it as long as shown in the picture w/ the bottom assembled?

thanks

Hi, it can be cut short or left long your preference. I find if it is long when the juice gets low (past the top of the wick) it delivers juice faster it there is a hole in the wick.
Dan

 

[Youssefa]

This pic is of GGT, I went all out. Wth the o rings... It adds a little something to the otherwise shiny but bland landscape

Sent from my Desire HD using Tapatalk 2