GG Double Slim

[MatrixTech]

I received a GG silver double slim today from an ECF member, I had bought 4 of the blue IMR 10440's from Drew and I didn't realize I must need spacers? What mm do I need, trying to rig something up..

 

[MatrixTech]

Ok, so I got this working..Used a small real strong cylinder magnet off of a bracelet I had, stuck it on the neg side of the battery, positive side is on the portion end where the button is, hooked up a new LR 901, added some 24mg of Orange Dreamsicle...All I can say is HELL yeah!! Loads of vapor and th..very pleased. Thank you Queen!

Please let me know if my battery configuration is wrong, assuming there should some wiggle in the battery when the button is not surpressed as it is purely mechanical, haven't used the double yet with 2 batts

 

[imeothanasis]

Nice to hear that you got a double slim Matrix my friend and welcome to GG forum.

Button has 2 scales. No need to press it hard, the first scale is ok. But there is no problem to push it harder, its ok too.

If you hear battery moving, its the spring. Strech it a little and you will be ok. Maybe you use unprotected batteries that are shorter, thats why you need the spacer

 

[B-Rad_The_Mad_Vapr]

Yes, he's using the IMR LiMN batteries which don't have the protection circuit (not needed due to battery chemistry)

 

[MatrixTech]

Mine does not appear to have a spring, is it supposed to have one?

 

[imeothanasis]

no spring? Thats why you had to put magnets on the battery lol

Matrix, I dont know what happened to your spring but better to ask Bruce to send you a new one

 

[MatrixTech]

No spring button works great. What end does the spring go on, button end or the peice that screws in for the atty connection.

 

[Daz 7401]

Hi Matrix,

The spring is on the atty end. Daz

 

[MatrixTech]

Matrix, I dont know what happened to your spring but better to ask Bruce to send you a new one

I had bought the GG Slim from a friend on here but it didn't come with one, I really didn't want to spend another $35 on the nickel 510 connector with the spring, I just have to find a spring the right size I guess...Any ideas?

 

[imeothanasis]

a spring is better to be cone but if you cant find one please try a spring with 0,6 width and 5mm external diameter Matrix

 

[MatrixTech]

Thank you for the measurements Imeo, your the best

 

[imeothanasis]

anytime Matrix my friend