GG stealth prototype

Status
Not open for further replies.

kcos

Unregistered Supplier
ECF Veteran
Feb 5, 2011
3,245
6,439
Rochester, NY
mawnco.com
I see that several people have the same problem. Ok guys, tomorow I will stop for 4 days the UFS production to make new telescopes and new extensions. I will send them for free to all my customers that have bought the previous batch of GGTS. Of course my customers can keep their existing telescopes and extensions so they can have 2 of a kind.

I'm new to the GG and I can see why they all speak so highly of you. You definitely take care of your customers. I bought the GG stealth and fell in love I also bought the telescopes at first I didn't think it work at all then I flipped it and it will fit on one side. Thanks for taking care of this imeothanasis
 

Wingapo

Vaping Master
ECF Veteran
Verified Member
Aug 19, 2011
3,647
4,796
Taos, NM
kcos! We're all over the threads getting the same mods around the same time, it's so exciting isn't it? I am also sorry for the behavior on the other thread but I honestly hadn't even noticed because I was too busy watching Shpaolin vape his brains out on that couch.

I do think that the GG should come with a health warning on the side though, "Warning GGTS with any tank attached will lead to nicotine coma and an increase in juice loss."
 

kcos

Unregistered Supplier
ECF Veteran
Feb 5, 2011
3,245
6,439
Rochester, NY
mawnco.com
kcos! We're all over the threads getting the same mods around the same time, it's so exciting isn't it? I am also sorry for the behavior on the other thread but I honestly hadn't even noticed because I was too busy watching Shpaolin vape his brains out on that couch.

I do think that the GG should come with a health warning on the side though, "Warning GGTS with any tank attached will lead to nicotine coma and an increase in juice loss."

Yes I agree LOL
 

Major

Supplier Associate
ECF Veteran
Mar 22, 2011
1,956
1,888
Panama City, Florida
www.ggecig.com
I will be getting my stealth cap tomorrow so I still dont know if it will fit correctly on mine or not.. Are we to contact Bruce if the fit is wrong or how do we go about getting the newly corrected Telescope??

Imeo will set the details for obtaining the replacement parts and it will be posted as soon as the information becomes available. I may be incorrect but my understanding as of this minute is that it only affects owners of the first production run of SS GGTS. To see if yours is a first production run, just look at your serial number.

Any SS GGTS that has a serial number less than 300 OR doesn't have the engraving on the botom tube "By Imeo" would be affected so there are 2 ways to be sure. ;)
 

Major

Supplier Associate
ECF Veteran
Mar 22, 2011
1,956
1,888
Panama City, Florida
www.ggecig.com
Also guys, due to the replacement SS GGTS parts being manufactured, Imeo has delayed the UFS for 4 days. Since many of you are also looking to score a UFS as well, please check this thread for the Imeo authorized (un)Official UFS Countdown Clock:

http://www.e-cigarette-forum.com/forum/gg/221235-un-official-countdown-ufs-thread-24.html#post4214430

As you will note, a total of FIVE days has been added to the clock since the original count was to run down on a Sunday anyway. PLEASE KEEP IN MIND that the "countdown clock" was an informal idea that Imeo graciously allowed me to post here. It is intended solely to give you an approximation of when the UFS are beleived to be ready for shipment to resellers.

Anything can cause a delay so please do not stake your chances for pre-ordering a UFS on the clock! There will be official announcements by the world wide resellers as to when the true pre-orders are up! The clock was just to give uis an idea of when to get ready for that event! :)
 
Last edited:

JollyRogers

Ultra Member
ECF Veteran
Verified Member
Dec 30, 2009
2,537
1,070
Virginia
Thanks Imeo for such a generous offer to send telescope. I have #026 SSGGTS. I guess I will need that telescope to use the Stealth cap with my current SSGGTS if I want to use larger batteries. I know you will post details etc. I also purchased a full Stealth. It only means to me that my current telescope cannot be used with the Stealth, correct? My intentions were to use the Stealth as a small carry about dripper and switch the UFS to it when driving... so no emergency here. I also have an aluminum GGTS. I wonder if my Stealth cap will work with that telescope? I don't understand why the telescope wouldn't work, did the threads change on the "By Imeo" model?
 

imeothanasis

Unregistered Supplier
ECF Veteran
Feb 13, 2009
47,882
34,510
Athens, Hellas
gg-goldengreek.com
aluminium GGTS and all the GGTS exept those 300 will work with stealth cap Rogers. I didnt make so many telescopes and extensions because not all people will buy the stealth cap. So every one that has bought the stealth cap and he has issues with telescopes and extensions will contact to my sellers and he can have those 2 pieces for free.

I didnt know that there was a compatibility problem until Jen said it on her Stealth video. Maybe something went wrong on machining process. Next time I will test all new GGTS to fit on any previous batch to ensure that those issues will be avoided.
Thanks Imeo for such a generous offer to send telescope. I have #026 SSGGTS. I guess I will need that telescope to use the Stealth cap with my current SSGGTS if I want to use larger batteries. I know you will post details etc. I also purchased a full Stealth. It only means to me that my current telescope cannot be used with the Stealth, correct? My intentions were to use the Stealth as a small carry about dripper and switch the UFS to it when driving... so no emergency here. I also have an aluminum GGTS. I wonder if my Stealth cap will work with that telescope? I don't understand why the telescope wouldn't work, did the threads change on the "By Imeo" model?
 
Last edited:

imeothanasis

Unregistered Supplier
ECF Veteran
Feb 13, 2009
47,882
34,510
Athens, Hellas
gg-goldengreek.com
I will send those parts to my sellers cliff, no worries about that. I will inform all of you when I will be ready
How do we get the replacement parts Imeo direct from you, or in my case from Cam? That also a great gesture mate and appreciated. my serial number is 51 so one of the first S/S.
 
Status
Not open for further replies.

Users who are viewing this thread