GG stealth prototype
- Thread starter imeothanasis
- Start date
- th_trl_thread_readers 0
- Status
I had the same thing with my, I played around with the button and now it's working great.
I loosen that little nut thingy out then tight it back up. But i'm very new to this so you might want to listen to someone who knows more.
Last edited:
With these switches, I take them apart using a 5mm and 10mm wrench. Then use some vaseline on the compartment the spring resides in. Then put it back together, and snug it back down using that 5 & 10mm wrench. After a little use, the button starts working like butter. Then make sure the spring that sits at the base is making proper contact. Otherwise, it is an atomizer/liquid combination that is not working or flooding. I know you aren't new to vaping, so I am assuming you aren't flooding the atty.
Usally it's the springs that couse the problems...But for me that's very rare. I had some problems with magnets but when I switch to springs, only rock and roll 
ita always the springs. Sand a little the button spring and the battery spring wiskey and you will be more than ok
I am afraid to take it apart LOL....What are the magnets for???
I also discovered that alot of the airiness I was getting was coming thru the atty intake holes where you screw them on...I improvised a cart cap to go down over the atty & over the holes...works a little bit better but still no sweet spot~
I also discovered that alot of the airiness I was getting was coming thru the atty intake holes where you screw them on...I improvised a cart cap to go down over the atty & over the holes...works a little bit better but still no sweet spot~
Last edited:
The magnet upgrade is a replacement for the spring inside the magnet. They should last much longer then the spring
This video shows a button taken appart. GG TS Magnetic Switch installation - YouTube And explains how the magnets work ect. Granted your button will be the newer style then this button but the way it works is the same.
Hi Whiskey, unscrew the bottom cap and take spring out and clean it, use your nail file on the top of the spring then make sure you screw it back in tight and see if that works
can we have just stealth rethreaders to buy and maybe female ones? its lots of fun the combinations one can come up with all this parts!!
I thought of that too when I was making the male rethreater mister xaxaxa, we had the same thought. Maybe I will do it but first we have to find a use for it
can we have just stealth rethreaders to buy and maybe female ones? its lots of fun the combinations one can come up with all this parts!!
I have SS GGTS #143 the Stealth cap does not fit the extension section above the telescopic tube. To be clear it fits the telescopic tube, but not the extension above it. I sent a notice to Bruce through COV, is that enough?
Yes its ok Poppa. But maybe Bruce wants you to send him your mail after I will ship those parts. I dont really know. But when I will ship the parts you will know for sure because I will make an announsment on forum
this little stealth is a work of art...just freakin gorgeous!!! I'm back in the GG game...
Last edited:
- Status
Similar threads
- Locked
