Yeah, not quite in order- no word on my #25576 yet, but shouldn't be long now...
GG Talk!
- Thread starter Bigbuyer
- Start date
- th_trl_thread_readers 0
- Status
I got some bummer news, my drip mode oddy should be here tomorrow but COV sent me a new email saying they forgot to include my wick and wire and that it was now shipped. But that means probably wednesday except that wednesday is the 4th and the USPS is closed. So maybe thursday at best. And my Pene number is way up in the 26,xxx's so that will probably not show up till Fri-Sat if I get really lucky. Oh well, at least COV fixed it before it showed up and I found out on my own.
Hey Mudd thats gonna be hard to do dont ya think? I would like to try doing the same but im weak. I know up front i couldnt hold out for 1 day. but good luck to you. when is the ETA on the Proteus's ?
WHAT WHAT!!!
COV!!!
We workin hard up in here!
Specially our shipping team today.
All-star team baby!
Mad Props...
Lets just say I have tons of mail to take to the post office tomorrow morning!
COV!!!
We workin hard up in here!
Specially our shipping team today.
All-star team baby!
Mad Props...
Lets just say I have tons of mail to take to the post office tomorrow morning!
Thank you COV Team for all your hard work!!! It is appreciated!! And thanks to Imeo for such great vaping gear!! 
Jeff "Jagellpuff" via iPhone using Tapatalk
Jeff "Jagellpuff" via iPhone using Tapatalk
Mine had tons of vapor for a few hours and all of a sudden it just dropped off really bad like my battery needed a charge. One thing I noticed with the first time setting it up, was that the wick broke off really easy. Once I got it built the first time I knew it was going to be easy from that point on. But I wonder if adjusting the juice control over and over causes issues? Any one have some input on that?
Edit. Took the cap off and the wick is full of gunk. What I see from that is that the inner coils are glowing and drying out while the majority of the vapor is coming from the outer ends of the coil. Any way to change that? I have had the draw wide open since I started getting dry hits otherwise. Also whats the best way to clean it? I used the juice it came with. Not sure of the VG content. Normally I would use 50/50.
Edit. Took the cap off and the wick is full of gunk. What I see from that is that the inner coils are glowing and drying out while the majority of the vapor is coming from the outer ends of the coil. Any way to change that? I have had the draw wide open since I started getting dry hits otherwise. Also whats the best way to clean it? I used the juice it came with. Not sure of the VG content. Normally I would use 50/50.
Last edited:
juice that came with it? did you order juice with it? the way to clean it is make a new coil (thats what i do anyways or dab it with paper towel to get a little more life out of it
(thats what i do anyways or dab it with paper towel to get a little more life out of it
Ya I got some juice with it. But dang. Having to change the coil every day is going to get annoying real fast. Its hard to wrap my mind around that. Please don't tell me its normal to change that thing out every day. I must be doing it wrong. It was not open all the way from the start. Maybe that's what I need to do. Let it flood and slow the flow as I go.juice that came with it? did you order juice with it? the way to clean it is make a new coil
strange thing is It never floods with mine.. hmmm seems like unless its is tightened down a lot I get about the same flow.. love it! only time it flood is if i try and take the tops off and forget to poor out the excess juice before servicing the coil lol
The juice is bad pervades the middle of the coil.
For the 50 \ 50 PG \ VG you need to add 10% to the composition of the water distsillirovanyoy juice Striker911
For the 50 \ 50 PG \ VG you need to add 10% to the composition of the water distsillirovanyoy juice Striker911
Order #25801 - 2 Penelope /1 and some maintenance pieces... on its way.
I hope all the O~rings were installed on all the units especially the O~Ring between the ceramic and top nut on the new Odysseus.
Sent from my Samsung "SuperSonic" Tablet ... utilizing Tapatalk 2
I hope all the O~rings were installed on all the units especially the O~Ring between the ceramic and top nut on the new Odysseus.
Sent from my Samsung "SuperSonic" Tablet ... utilizing Tapatalk 2
Mine had tons of vapor for a few hours and all of a sudden it just dropped off really bad like my battery needed a charge. One thing I noticed with the first time setting it up, was that the wick broke off really easy. Once I got it built the first time I knew it was going to be easy from that point on. But I wonder if adjusting the juice control over and over causes issues? Any one have some input on that?
Edit. Took the cap off and the wick is full of gunk. What I see from that is that the inner coils are glowing and drying out while the majority of the vapor is coming from the outer ends of the coil. Any way to change that? I have had the draw wide open since I started getting dry hits otherwise. Also whats the best way to clean it? I used the juice it came with. Not sure of the VG content. Normally I would use 50/50.
Dry burn your coil. You should see it all glowing by the time the gunk burns off. As for the middle drying out, you may have the coil wrapped to tight.
The reason is not that.
Bad taste gives poor sap flow to the coil. Also, the coil windings which do not relate to the wick (the coils heat up quickly)
Bad taste gives poor sap flow to the coil. Also, the coil windings which do not relate to the wick (the coils heat up quickly)
I never added Distilled water to eliquid but I am not apposed to trying it. The calculator that I use has a place for water in the mix. But what does it do as far as vapor production, and taste?The juice is bad pervades the middle of the coil.
For the 50 \ 50 PG \ VG you need to add 10% to the composition of the water distsillirovanyoy juice Striker911
Okay. So once the Vision stone needs filled I will dump the oddy in the VS and do a dry burn. Then open the flow all the way and see if that helps. If not then re-wrap time. Thanks for the help.
Mine had tons of vapor for a few hours and all of a sudden it just dropped off really bad like my battery needed a charge. One thing I noticed with the first time setting it up, was that the wick broke off really easy. Once I got it built the first time I knew it was going to be easy from that point on. But I wonder if adjusting the juice control over and over causes issues? Any one have some input on that?
Edit. Took the cap off and the wick is full of gunk. What I see from that is that the inner coils are glowing and drying out while the majority of the vapor is coming from the outer ends of the coil. Any way to change that? I have had the draw wide open since I started getting dry hits otherwise. Also whats the best way to clean it? I used the juice it came with. Not sure of the VG content. Normally I would use 50/50.
Typically your issue is caused by one or all of the following:
Wire type does not handle the high heat well ( Make sure you are using the recommended wire type) Nickle, NiChrome, Kanthal typically
Wire gauge is too low for the voltage supplied
Battery not producing enough voltage for the coil in question
Coil wrapped too tight around the wick
Coil wrapped with too much or too little space between each winding
Wick material too soft or not solid enough
Juice viscosity too rich for coil / wick setup
Darker colored juices tend to produce more junk or even completely coat a HR coil at a lower voltage
Above is just a few things you can look at for starters.
Hope this helps.
Peace-
Sent from my Samsung "SuperSonic" Tablet ... utilizing Tapatalk 2
- Status
Similar threads
- Locked
