The older connector was on the 1st series GGTS, it is a 4 in 1 connector, 510 native, a rethreader used for the others. I have one and am using it here at lunch with a short did, no adapter. Sits flush.
GG Talk!
- Thread starter Bigbuyer
- Start date
- th_trl_thread_readers 0
- Status
So these new ones come 510 so the other is not needed or?
On Tapatalk via my Mobile
On Tapatalk via my Mobile
If you don't have the rethreader, the cap will screw onto the telescope tube or the top tube.
The brass connector in the link is the old style brass connector and Imeo did indicate that he would make them if we wanted them. If it is the 4 in 1 ( I don't know ), it's native connections are 510 and 801. You will need a rethreader adapter for 901 and 808
The brass head that you refer to is part of the button
Quote from Bruce
COV Edition is for you Brass lovers ou there. Brass bottom and top cap, connector and telescope. New will be the 2 tone flat top button.
So you get a great 2 tone look!
If you don't have it already, you will probably want the Ody/GGTS base for connection Ody to TS.
So if I don't get the base for Ody there will be a gap or?
On Tapatalk via my Mobile
On Tapatalk via my Mobile
Yes I received a classy GGTS today and my long Ody is mostly full, so I put the stealth cap on so I could just thread the Ody on how it was and there is a 3-4mm gap
Back out the connector pin (from the bottom of the stealth cap), then thread on the 510 base ody, then snug up the connector pin. This will eliminate the gap.
Thank you Capt., but the point was my long Ody was almost full. So I didn't want to open it until I vaped all the juice. Its almost empty now so I can put her back together with the proper GGTS Ody base that I got from COV last time they were in.
Ken
What Capt. is saying is that you don't need the 3-4mm gap on the stealth cap and you don't have to take apart your ody to get rid of the gap. The stealth has an adjustable pin that you can back out from underneath the stealth cap. Then you snug in the ody and advance the pin on the cap thus getting rid of the gap.
I know what you're doing though you want to empty the ody, put in GGTS base and use the regular cap. He was just offering a no gap solution for you or anyone else that was interested in using the 510 stealth cap.
I know what you're doing though you want to empty the ody, put in GGTS base and use the regular cap. He was just offering a no gap solution for you or anyone else that was interested in using the 510 stealth cap.
Last edited:
thanks! K so these ones coming to us have what cap? So sorry.. I am going to order lots of pre order and after the ufs and GGTS SS, Brass tele, two tone button, gold bottom , Ody base for ggts etc,etc,I don't have the extra cash to order stuff even one iota to much
On Tapatalk via my Mobile
Last night I tried that with a Penny and I ended up pushing the ceramic up. Thoughts?
BTW I'm running out door I will get back to you in a couple hrs
TIA
Exactly. I do prefer the collector tank & airflow control with the TS native base, but this has it's place too.
CoV has stealth caps on the advance orders page now, both brass and steel!
Alright guys, I need some input from the pros. I'd like to get some parts and backups for my new GGTS, but am unsure of what I should buy? What parts are prone to failure/wearing out? What should I stock up on? I know I want the stealth cap, but other than that I'm at a loss at what I should pre-order. All the different parts are confusing to me, so would like some input from the GG pros. Thanks all!
Hey Ty,
I know COV listed the Stealth cap on their preorder list, but the actual cap that will be available is the old style 4 in 1. It looks like the stealth cap but without the rethreader ring. Here's the advance order list that Imeo will be making and shipping sometime after oct.
http://www.e-cigarette-forum.com/fo...anced-gg-orders-important-please-read-10.html
The stealth and it's parts will be available on the next advance order, so it will be a while for it.
The only parts that will break down are the springs, the delrin insulators, and the orings
I know COV listed the Stealth cap on their preorder list, but the actual cap that will be available is the old style 4 in 1. It looks like the stealth cap but without the rethreader ring. Here's the advance order list that Imeo will be making and shipping sometime after oct.
http://www.e-cigarette-forum.com/fo...anced-gg-orders-important-please-read-10.html
The stealth and it's parts will be available on the next advance order, so it will be a while for it.
The only parts that will break down are the springs, the delrin insulators, and the orings
Thanks Mike, so basically, I should hold off and wait for the newer style stealth cap? I really don't need it anyway, more of a "want" kind of thing 
You can use the old style cap in a kind of stealth mode, you will just connect it to the telescope instead of the rethreader. Put an 18350 in your bottom tube, screw on the telescope, then the 4 in 1 cap, then tighten until you have connection. Same size of stealth but you will have a little telescope showing instead of the rethreader ring. Considering the wait for the stealth cap, and the convenience of stealth size, it might be worth getting the old style now. I guess it just boils down to how bad you want that mode.
If you mean for the 29th/30th ggts preorders, not myself. Saw this last night, though. Maybe today, hopefully before the weekend. =P
http://www.e-cigarette-forum.com/fo...4-status-ggts-shipping-july-30-pre-order.html
http://www.e-cigarette-forum.com/fo...4-status-ggts-shipping-july-30-pre-order.html
- Status
Similar threads
- Locked
