GG Talk!

[CaptSteve]

I was actually disappointed when I saw that COV didn't have in stock brass top & bottom caps for the brass TB tube. Looking at yours though D, I love the two tone effect of the brass with SS ends. I should have mine in a couple of days.

The GGTB for 2012 - SS or Brass

Both are (or were) avail. at COV. Get these while you can. The next run of GGTB tubes won't be until next year.


Bottom and Top caps and NEW adjustable GGTB button now available for pre-order.


Shown with Penelope and Odys. Drip Mode and adjustable buttons.

 

[Closetpan]

Thanks dspin and just Wow!

 

[smitty727]

Poppa, you're a genius and I'm an idiot. I have 2 UFS that I haven't used in a while specifically because I prefer drip mode Ody. Previously I was using a combination of adapters to get drip Ody to fit on my GGTS's - 510 to 901 & 901 to 510. Of course these China made adapters were not good. I had numerous shorts and about half the ones I bought were faulty when I got them. I had even gone so far as to give up on drip mode Ody - bought GGTS adapters and was dripping into short mode Ody. Didn't like that as well so went back to fighting with the China adapters again. Don't know how I missed your post but today I was frustrated with another non working adapter and decided to search to see how other folks were solving the problem of attaching drip mode Ody to GGTS. Found your post and wouldn't you know it, works like a charm. Thank You, Thank You, Thank You!!! Feel like kicking myself in the but though to know I had the solution to the problem all along and been fighting this adapter problem ever since drip mode Ody came out lol. The versatility of GG's is amazing. I'm a happy GG vaper again, thanks to Papa & Imeo. Of course I realize that not everyone has the good fortune of having extra UFS connectors laying around but for those who do this works great.

Replace the GGTS 510 connector with a UFS 510 connector, remove the compression nut from inside of the GGTS collector tank cap, it will fit over the UFS 510 connection. Attach your Ody, adjust the tank cap until its snug on the base and the Ody will be air tight, your AC ring will have %100 air control.

I hope this is clear, and it helps.

 

[Bigbuyer]

dspin....looks beautiful!

 

[iggyLover]

What date do advanced orders end? And when should we expect them?
thanks!

 

[Jagellpuff]

AW 17650 for 3.7, AW Lipo4 3.2 for 6V and AW 16340 IMR for 7.4. I mainly use it at 6V, then if ohms drop, take it to 7.4

I take it you are stacking to get 6v & 7.4v.


Jeff "Jagellpuff" via iPhone using Tapatalk

 

[Clint]

Yes, he is stacking. I also use the same battery configurations that dspin does.

I take it you are stacking to get 6v & 7.4v.


Jeff "Jagellpuff" via iPhone using Tapatalk

 

[erich]

I've been a die hard 6v fan for a year or more. Recently, I've been experimenting with dual coils on the Ody, and while I'm getting close, it's just not quite there yet. I can't seem to end up less than around 1.5Ω, which just doesn't work out to comparable wattage.

6.4V @ 2.9Ω = ~ 14w
3.7 @ 1.5Ω = ~ 9w

Need to get it to about 1Ω to be comparable. Still, this is the first foray into 3.7 I've made in a while, and this is just too convenient to carry around.

Not as skilled at polishing or photography as dspin.

 

[JAWS]

dspin I'm trying to order the NEW adjustable GGTB button. The only one I see is this one
GGTB - Steel Flat Top Button Replacement . And it doesn't mention anything about adjustable. Just want to order the right one. Thanks

The GGTB for 2012 - SS or Brass

Both are (or were) avail. at COV. Get these while you can. The next run of GGTB tubes won't be until next year.


Bottom and Top caps and NEW adjustable GGTB button now available for pre-order.


Shown with Penelope and Odys. Drip Mode and adjustable buttons.

 

[crispysaturn]

Is the button on the tb the same as ggts? I want to get brass button pins and this question can kill 2 birds 1 stone as if they are same then I believe it is an adjustable button.


Sent from my iPhone 4 using Tapatalk

 

[Ratman]

Beautiful Dspin. Would be even nicer if you could buy one.

 

[house mouse]

Beautiful Dspin. Would be even nicer if you could buy one.

But you can! I just bought the brass tube from COV(stainless available too) and should have it in a day or two. The rest of the parts for it are on the current pre order list. Granted, it will involve a little wait. But you can get it.

 

[JthaBigVapor]

Very True House Mouse!

You can get yourself one for a little of your time both tubes are up and the rest of the parts are up for advanced ordering

I already miss mine! infact.. might be time today to bust out my good ol' brassy tb

 

[Ratman]

Hmmm... Not sure what all parts would be needed to build a complete one. Will have to dig up the schematic pdf's. I am pretty sure they are posted here on ecf.

Looks like prices went up on the parts? Advance order prices are a fair bit higher than the regular parts page notify me prices for what looks like the same part.

 

[RiverNut]

Ratman

You just need the tube, battery cap, connector cap, and button switch. The price discrepancy might be adjustments in the exchange rate but that's just a guess.

 

[house mouse]

I just got my brass TB tube in and it's absolutely beautiful! Ratman, if you're considering doing it, I'd go on and jump on it while there are still some available.

 

[Ratman]

Thanks for the info guys.

 

[JthaBigVapor]

Sorry about the delay due to maintance,

we are back up and running

 

[RiverNut]

Justin, can you please fix the status of the Ody short mode mouthpiece ( in the Advance order) so I can complete my order?
Thanks

 

[JthaBigVapor]

Should be fixed now