GG Tilemahos V2 and Penelope V4 mini official thread

[netlag]

i have been vaping my brand new tilemahos v2 for the last two hours, with a (spaced) 5 wraps build, kanthal A1 0.30mm over a 3mm drillbit at 13.4 watts with KGD cotton.

I was a huge kayfun lite plus fan till yesterday, lol. This tilemahos atty, is simply a direct upgrade over the KFL+ in any possible aspect. Easier to build, better quality, less noise, much better airflow which means clouds, and better throat kick and flavor. The only concern I have is the lower liquid capacity, but that will be no longer a problem as soon as the larger tanks will be launched. The machining of the tilemahos is flawless.

I have been using it only for two hours, and i honestly believe that this atty is actually better than my original expectations. Well done imeo! ( /respect )

Now I am looking for a matching driptip. My fogger driptip matches the matt finish of tilemahos well, but it is too loose (maybe because it is single o ring). My kayfun drip tip fits snugly but it does't match tilemahos aesthetically. Any suggestions?

 

[dems86]

i have been vaping my brand new tilemahos v2 for the last two hours, with a (spaced) 5 wraps build, kanthal A1 0.30mm over a 3mm drillbit at 13.4 watts with KGD cotton.

I was a huge kayfun lite plus fan till yesterday, lol. This tilemahos atty, is simply a direct upgrade over the KFL+ in any possible aspect. Easier to build, better quality, less noise, much better airflow which means clouds, and better throat kick and flavor. The only concern I have is the lower liquid capacity, but that will be no longer a problem as soon as the larger tanks will be launched. The machining of the tilemahos is flawless.

I have been using it only for two hours, and i honestly believe that this atty is actually better than my original expectations. Well done imeo! ( /respect )

Now I am looking for a matching driptip. My fogger driptip matches the matt finish of tilemahos well, but it is too loose (maybe because it is single o ring). My kayfun drip tip fits snugly but it does't match tilemahos aesthetically. Any suggestions?

GG Drip Tips are supposed to launch within the next few weeks. I'm planning on adding one onto my Tilemahos v2 preorder. Imeo shoes then off in a couple recent videos under his YouTube channel.

 

[breminator]

yes, imeo is preparing a driptip that matches perfect to tilemahos.
another option is an old sam drip tip, you can see them on a the samenamed group on facebook.
they have a lot of different dt in a very high quality.
today i ordered two and will psot pics when arrived

 

[netlag]

well it is a sure bet that I will grab one of the GG driptips if they are compatible with the larger tanks. I do hope they will be!

 

[imeothanasis]

i have been vaping my brand new tilemahos v2 for the last two hours, with a (spaced) 5 wraps build, kanthal A1 0.30mm over a 3mm drillbit at 13.4 watts with KGD cotton.

I was a huge kayfun lite plus fan till yesterday, lol. This tilemahos atty, is simply a direct upgrade over the KFL+ in any possible aspect. Easier to build, better quality, less noise, much better airflow which means clouds, and better throat kick and flavor. The only concern I have is the lower liquid capacity, but that will be no longer a problem as soon as the larger tanks will be launched. The machining of the tilemahos is flawless.

I have been using it only for two hours, and i honestly believe that this atty is actually better than my original expectations. Well done imeo! ( /respect )

Now I am looking for a matching driptip. My fogger driptip matches the matt finish of tilemahos well, but it is too loose (maybe because it is single o ring). My kayfun drip tip fits snugly but it does't match tilemahos aesthetically. Any suggestions?

thank you net for being so generous with your comments about Tilemahos

I am making drip tips as the rest of GG friends said above. These drip tips are made especially for Tilemahos but they fit on other atomizers too. They will be all shined because mat drip tips will eat your teeth slowly

 

[imeothanasis]

well it is a sure bet that I will grab one of the GG driptips if they are compatible with the larger tanks. I do hope they will be!

they will be not compatible with the larger tanks net because they are short. Maybe old sam drip tips are compatible because they are long but I dont know if they are at 10mm in width

 

[Aal_]

thank you net for being so generous with your comments about Tilemahos

I am making drip tips as the rest of GG friends said above. These drip tips are made especially for Tilemahos but they fit on other atomizers too. They will be all shined because mat drip tips will eat your teeth slowly

How do drip tips eat your teeth imeo? I never put teeth on drip tips. Only lips .

 

[imeothanasis]

I do it aal lol

and I am not the only one for sure

 

[bluegenzel]

Origen driptips, which are matte, match perfect on the Tilemahos V2 and do not eat your teeth .

 

[dems86]

Origen driptips, which are matte, match perfect on the Tilemahos V2 and do not eat your teeth .

Oh sweet, I got an Origen DT laying around have preferring to use a different DT on my OriGenny v2.

I'll definitely still get a GG one though, I really liked the way it looked in the video.

 

[bluegenzel]

I will get a GG too, but the Origen does it's work

 

[breminator]

they will be not compatible with the larger tanks net because they are short. Maybe old sam drip tips are compatible because they are long but I dont know if they are at 10mm in width

today i talked with the owner of old sam (by the way a great gg collector) and he have driptips with 10mm width.

 

[imeothanasis]

Guys, I think that you want what you want, (lol) so let me make mat drip tips too for you. Its easy for me.

 

[imeothanasis]

today i talked with the owner of old san (by the way a great gg collector) and he have driptips with 10mm width.

thats great brem. If old sam drip tips are 10mm in width and equal or longer than 17mm in length they will perfectly fit on Tilemahos V2 longer tank. They also have to have a clean surface (no logos, etc) because liquid will escape from these logos. Or at least the logos have to be at least 6mm higher than the base of the drip tip. And we need tight drip tips in general for Tilemahos mouthpiece

Give old sam my kind regards

 

[breminator]

thats great brem. If old sam drip tips are 10mm in width and equal or longer than 17mm in length they will perfectly fit on Tilemahos V2 longer tank. They also have to have a clean surface (no logos, etc) because liquid will escape from these logos. Or at least the logos have to be at least 6mm higher than the base of the drip tip. And we need tight drip tips in general for Tilemahos mouthpiece

Give old sam my kind regards

i will sent him your best wishes imeo.
i ordered two short dt today, and he showed me another in a longer style.
he always make different surfaces, as there are shiny, iced, two tone and so on.
i will check, if the longer ones will match with what you said.
maybe he can produce a special long dt only for tilemahos, as he did for the ufs and erlkönigin?
i will ask him about this.

 

[imeothanasis]

of course Brem. The only he has to check are the details I mention above, otherwise a drip tip will not work as we want and it will bring problems to customers

 

[Mtek]

today i talked with the owner of old sam (by the way a great gg collector) and he have driptips with 10mm width.

I really like OS tips, two tone Benny my fav. Is there anyway we can order online? I know it's store only purchase, but those of us in the US can't get access. I have only been able to get Erlk specific tips here. Thank you.

 

[dems86]

I really like OS tips, two tone Benny my fav. Is there anyway we can order online? I know it's store only purchase, but those of us in the US can't get access. I have only been able to get Erlk specific tips here. Thank you.

This interests me.

 

[Mtek]

Guys, I think that you want what you want, (lol) so let me make mat drip tips too for you. Its easy for me.

I pre-ordered for next shipment..I think April 10th. Will tips be available by then, I'd like to add to order? Thank you.

 

[dems86]

I pre-ordered for next shipment..I think April 10th. Will tips be available by then, I'd like to add to order? Thank you.

Yes they will....I asked him that earlier today