Alot of people like 306 atties and yes they last forever. I've used them for several months and never had one burn up yet. They do burn hotter than a 510 though.
GGTS/AVS with 510 Connector: what atty to use?
- Thread starter rogerdugans
- Start date
- th_trl_thread_readers 0
- Status
So they have lower resistance. Other atties have low resistance too. Something else that shows they are different Harpo? Different construction? Something special that they have inside?
They're an exposed bridge atomizer and come in all the different resistances that 510's come in.
ok, still nothing special Harpo. As I understand they are atomizers like all the others.
imeo i think what harpo is trying to say is could you make a 306 adapt to your current ggts and make a adapter that will work in the recent runs of ggts avs mods... correct me if i am wrong harpo .... could you make it work for the 306 users out here ...
lawnman3...
lawnman3...
Exactly Lawnman. Plus Imeo all the different classes of atomizers have their own unique characteristics. 306s are becoming hugely popular and alot of people have converted over to them. If you search ECF the two most common atomizers talked about now are the 510 and 306. A close third is the new mini 801's on the market now. But hey it's your show so do whatever you want, I just think people are trying to let you know they use 306's and would like to use them in the AVS.
imeo the 306 is an exposed bridge atty and we would think if you look into the 306 attys you might just be able to mod a connector / adapter to make them work inside your current and past / older ggts and avs/afs juice tanks ... thats all just look into making it for your gg users...
thank you ...
lawnman3.. make it and they will buy it ... as a custom / add on piece...
thank you ...
lawnman3.. make it and they will buy it ... as a custom / add on piece...
Making an adapter for those atties is maybe easy guys. But I wanted to see what is really happening with those atties. The conclusion is maybe nothing special. But if people want them then no problem.
I would like to see how it would taste, mwa (????sleeve????hmmm), harpo, and lawnman are right, the 306 is a better atty than the 901 IMO -- don't be doubting, be open, Imeo!!!
), harpo, and lawnman are right, the 306 is a better atty than the 901 IMO -- don't be doubting, be open, Imeo!!!I am always open ripple my good friend, you know this I am sure, I just need proof. What is the point that has improved? We cant stay on words like "wow" or "its the best" without knowing deeper details. Its not difficult to take people on your side just by making impressions
Ripple try this, take the stock 306 carto, cut a piece of it about a 1/2" slide it over the 306, now take a blank 510 tube and cut it to the size of a 901 Atty, or just use a 901 Atty then slide that tube over the 1/2" 306 piece that you put on the Atty. a very little bit of super glue around the outside of the 306 tube first before you slide the 510 tube on or blank 901 Atty tube on and Done deal, no new connector is needed the 510 connector works fine since the 306 & 510 have the same threads. Once you make this custom sleeve and make it correctly your good to go. The trick is a perfect seal between the tubes.!
As for the paint on the Attys for Bugg and others it really depends on what additives are in you liquids whether it effects thE paint or not, but after a long time most of the time the paint will fade off not only does it peel off with atomic cinnicade but it fades off with some other liquids so if you dont wanna remove it and vape it then its up to you. a vigorous sanding takes it all off very easily then you can clean the excess with PGA
As for the paint on the Attys for Bugg and others it really depends on what additives are in you liquids whether it effects thE paint or not, but after a long time most of the time the paint will fade off not only does it peel off with atomic cinnicade but it fades off with some other liquids so if you dont wanna remove it and vape it then its up to you. a vigorous sanding takes it all off very easily then you can clean the excess with PGA
Last edited:
Lawnman and Harpo are on my track,, Imeo you make the GG & ALL GG's to run on all Attys but not the tank, and it took me forever to complain in your ear for the 510 connector until you finally gave in, why not make the tank always be able to run on all Attys so people have choices was my thoughts, everyone has a different Atty these day and many like to use this Atty or that Atty so a tank and fitting to run the 901/510/801/306 would be nice to have, especially one for these new Mini 801 Atty's that your old friend Issac and Eastmall have been selling, but especially Issacs they are one awesome Atty you should give them a try, they come in LR and now HV and are my personal new favorite because they bring out the flavor of my juice more. OK just my 2c
Cisco designed LR306 and such use a nichrome wire that cisco specifies and not sure about the coil design but I'm sure there's something unique about it.
joye LR306 vs Cisco LR306 Cisco FTW! big difference in performance
mwa I'm going to try that trick sleeve when my adapter arrives
joye LR306 vs Cisco LR306 Cisco FTW! big difference in performance
mwa I'm going to try that trick sleeve when my adapter arrives
Till now noone knows if there is something special with 306 atties. So if anyone has opened a 306 atomizer he can post his opinions here.
Cape, there is no special nicwire my friend. Nic wires are the same. If they have a per cent difference in materials (nic or chrome) thats not something that plays a role.
The only I see is that maybe they last longer. If thats real then this is a big advantage
Cape, there is no special nicwire my friend. Nic wires are the same. If they have a per cent difference in materials (nic or chrome) thats not something that plays a role.
The only I see is that maybe they last longer. If thats real then this is a big advantage
Last edited:
I used a LR cisco 306 atty and IMHO it gave clouds of vapor great TH but again IMO it lacked flavor I now use a LR cartomiser which IMO give good vapor great TH but give me better flavor,I really can't see what all the fuss is about maybe I'm using it wrong lol they do burn juice up very fast and that maybe where it loses flavor I will also point out every now and then I got a very bad burnt taste again that maybe down to how I use it oh! and mine died in under 10 days, used only in the evening FWIW, for me tho I'm sticking with my LR cartomisers for now.
John, you are right, all atomizers are made in China for now. There is no way for an atomizer to be better than other, they all use the same technique. I am very close to make something special but I am far enough at the same time lol
Hope so imeo then we can put a name if something goes wrong? ATM i have no idea who the hell made my kettle lol
imeo the thing with the Chinese they like to cook things at a very high temp just like their atty's and it reduces flavor IMO slow steady cooking produces lots more flavor lol
- Status
