GGTS inprovements
- Thread starter imeothanasis
- Start date
- th_trl_thread_readers 0
- Status
Thanks for the info vapnaway! 
I assumed this little brass piece is required for cartomizers as well?
Maybe I misunderstood or something has changed since, but isn't one of the main features of the GGTS a 4-in-1 atomizer connector? At least to me that meant I could connect 4 different type of atomizers on that 1 connector without any additional parts. I am always misplacing my adapters so this feature interested me most. I guess I'm not seeing this much of a feature or any different from using adapters as you still need an additional part for some of the atomizers to work. Hopefully there will be a true 4-in-1 connector someday...
I assumed this little brass piece is required for cartomizers as well?Maybe I misunderstood or something has changed since, but isn't one of the main features of the GGTS a 4-in-1 atomizer connector? At least to me that meant I could connect 4 different type of atomizers on that 1 connector without any additional parts. I am always misplacing my adapters so this feature interested me most. I guess I'm not seeing this much of a feature or any different from using adapters as you still need an additional part for some of the atomizers to work. Hopefully there will be a true 4-in-1 connector someday...
Thanks for the info vapnaway!
Maybe I misunderstood or something has changed since, but isn't one of the main features of the GGTS a 4-in-1 atomizer connector? At least to me that meant I could connect 4 different type of atomizers on that 1 connector without any additional parts. I am always misplacing my adapters so this feature interested me most. I guess I'm not seeing this much of a feature or any different from using adapters as you still need an additional part for some of the atomizers to work. Hopefully there will be a true 4-in-1 connector someday...
put the 901 adapter on, leave it on and you can use all atties so it is a true 4 in 1 solution!
Thanks for the info vapnaway!
Maybe I misunderstood or something has changed since, but isn't one of the main features of the GGTS a 4-in-1 atomizer connector? At least to me that meant I could connect 4 different type of atomizers on that 1 connector without any additional parts. I am always misplacing my adapters so this feature interested me most. I guess I'm not seeing this much of a feature or any different from using adapters as you still need an additional part for some of the atomizers to work. Hopefully there will be a true 4-in-1 connector someday...
I was going to ask the same exact question, almost word for word, so you saved me the typing. Monty responded by saying you can leave the adapter on the unit, which is fine, but makes one think, why is it not built-in, if you can leave it on. Must be a reason as Imeo is a dam smart inventor.
A Storm is coming, just got notice it has been send!!! Lisa you are THE UK Super-Woman!!!!!!!
Thanks for the reply emonty! That's good news but how certain are you on this? I'm not positive but from looking at the pic, the 901/808 adapter looks like it needs to be screwed onto the 801 threads. Also, I don't think the 510 atty would reach the threads if the adapter is on. Can anyone else confirm that the 901 adapter can be left on and still be able to use the 510 or 801 attys? Thanks!
I had asked the Creator himself this question yesterday via PM and he confimred
lol, that works for me! Did you find out the reason behind it? Like Mactavish said, curious to know why have this small removable part if it can be left on. Thanks again emonty!
You're welcome, no I did not ask but also thought about it. I guess it has to to with making the threads and to have the solution working all together in the end, must be a "making" issue, but only one who can verify that....
You will need to take the 901 adapter off to run the 510 or 801, it can't just be left on and still run the 510 or 801...technically it's a 2 in 1 connector that works with 510 or 801 with an adapter that allows you to run the 901. Hope that helps.
Ive already seen it up close, plus theres an old video on it you may want to take a look at emonty...
The endcap is threaded for 801 atomizers and also internally is threaded for 510 atomizers, the center post moves up and down and is able to contact the center post of your atomizer. The 901 adapter has 801 threads on the bottom and 901 threads on the top. You can't screw it on (the 901 adapter) and then use the 801 or 510, you'll need to reomove it again to run those.
Hope that helps...
The endcap is threaded for 801 atomizers and also internally is threaded for 510 atomizers, the center post moves up and down and is able to contact the center post of your atomizer. The 901 adapter has 801 threads on the bottom and 901 threads on the top. You can't screw it on (the 901 adapter) and then use the 801 or 510, you'll need to reomove it again to run those.
Hope that helps...
Thanks for clearing that up for the GG people... I wonder if you are looking at this so you can make yours now... hahah...
Thanks David, for answering GG questions, but it's kind of bad forum etiquette to do this in supplier forums other than your own one isn't it?
No problem, glad i could help. I'm sure you've read my thread over on Vapors forum and know my feelings about how unethical it is to be copied...
Last edited:
Nope, I am not in the habit of reading that other forum. I only go there when I need a good laugh.....
No, not at all, you do know i'm a GG customer too and own two GG's, a Slim and a Nano and will probably pick one of these up too. I saw someone looking for information and knew i could be of help.
I thought we were all family here
Last edited:
Im sorry I had to chime in I have to agree with both. but I would say that its a 2.5 attie adapter due to the center post from the multi attie adapter is hitting the 901 attie directly. If the 901 adapter was its own adapter then it would have its own center post. thats the way I see it though.... so both are right in this case.
sorry for posting.....
sorry for posting.....
No worries, glad you could help out when we weren't around.
I think it's a game of semantics really. The fact of the matter is that you can use all four atomisers with the TS as standard and that's what I believe Imeo is getting at when he calls it the 4-in-1 solution.Im sorry I had to chime in I have to agree with both. but I would say that its a 2.5 attie adapter due to the center post from the multi attie adapter is hitting the 901 attie directly. If the 901 adapter was its own adapter then it would have its own center post. thats the way I see it though.... so both are right in this case.
sorry for posting.....
- Status
