GLV 1 mini help

[K*Rose]

Hello. Please help if you can. I just bought a GLV mini on the classies. It vaped awesome for two days, now nothing. I checked the batts, changed attys, still nothing. I think the problem is at the atomizer pin. My main questions is can you take the atomizer port apart and clean it. It is not the hex type head cap.
thank you so much.

 

[K*Rose]

ok, now i think that the pin is not hitting the atomizer. is there a way to pull it up a little? thanks.

 

[doots]

what has worked for me is to take off the little black cap that is on the bottom under the atty connector and push up the pin with something small just a bit till the center pin will make connection with your atty, should solve your problem. use something slender and small to poke up the hole.. you dont have to move it much.

I always use an adapter and leave it in place and that will stop the pushing down on the pin every time you take an atty on or off. like a 510 to 510 adapter.

ok, now i think that the pin is not hitting the atomizer. is there a way to pull it up a little? thanks.

 

[K*Rose]

Thanks for our help. I pulled the cap off and I see soft red material is it ok to push this? Sorry for being such a GLV newb.

 

[doots]

Thanks for our help. I pulled the cap off and I see soft red material is it ok to push this? Sorry for being such a GLV newb.

yes just be careful not to push too hard. you just want to move the brass pin that is in there up a tiny bit.

 

[K*Rose]

Thanks so much. It's working now. Shoooo!!! I think i'm gonna send it in for the cap update.

 

[doots]

Thanks so much. It's working now. Shoooo!!! I think i'm gonna send it in for the cap update.

i would definitely do that as soon as you can. I always hated that about that cap. good luck!