Does anyone who's received their VapeMail have an ohm meter, I dont wanna burn this bad boy out by accident. My multimeter decided to get stolen last year 
Go-Go Specific: Thread for All things Go Go
- Thread starter Devonmoonshire
- Start date
- th_trl_thread_readers 0
- Status
I'm loving the M1!
I just loaded two up for the evening. Ill report back with more info later.
I did find out that protank and evod heads do not work with the M1. I'll also be rewicking these with cotton as soon as these current wicks need cleaned. Cotton is amazing in my evod and protank heads and it ridiculously easy to do.
I just loaded two up for the evening. Ill report back with more info later.
I did find out that protank and evod heads do not work with the M1. I'll also be rewicking these with cotton as soon as these current wicks need cleaned. Cotton is amazing in my evod and protank heads and it ridiculously easy to do.
Lookin' forward to hearing your thoughts Coldpunk. Thanks for the cotton idea, please let us know if you try it how it goes!
Good Morning Nation!
In today's mail were the new M1 Go-Go tanks!
I immediately filled it with 555 and put it on the Fury. Played around finding the "sweet spot" ... and Yow!
Simply Put:
This is what I've been waiting for since my starter kit arrived in the mail over 3 years ago. A long lasting battery with a completely fiddle-free e-liquid delivery system that produces great Flavor, Throat Hit, and Vapor.
This. Is. It.
More Simply Put:
Perfection.
The search for the Holy Grail is now officially concluded. Case closed - Game over. The Go-Go Fury with the M1 tank is all that I'll ever need to carry in my pocket.
In today's mail were the new M1 Go-Go tanks!
I immediately filled it with 555 and put it on the Fury. Played around finding the "sweet spot" ... and Yow!
Simply Put:
This is what I've been waiting for since my starter kit arrived in the mail over 3 years ago. A long lasting battery with a completely fiddle-free e-liquid delivery system that produces great Flavor, Throat Hit, and Vapor.
This. Is. It.
More Simply Put:
Perfection.
The search for the Holy Grail is now officially concluded. Case closed - Game over. The Go-Go Fury with the M1 tank is all that I'll ever need to carry in my pocket.
First, let me thank all of you for helping me decide on a brand of e-cig. The GoGo has been wonderful for the last years.
Yes, I quit analog cigarettes (after 35 years of smoking) exactly one year ago last month!!!!!
The only place I could find batteries was through E. Gormly, bless him but apparently he has been out of stock for quite some time.
Can anyone help me locate a US supplier of GoGo batteries. Please.
Yes, I quit analog cigarettes (after 35 years of smoking) exactly one year ago last month!!!!!
The only place I could find batteries was through E. Gormly, bless him but apparently he has been out of stock for quite some time.
Can anyone help me locate a US supplier of GoGo batteries. Please.
Gogo news bulletin!
Kanger T3S/MT3S coils work in the M1! A five pack of replacement heads are 5.96 at DiscountVapers. They also come in three different resistances 1.8, 2.2, and 2.5(which is the resistance of the stock heads).
Unfortunately I haven't vaped the M1 enough yet to do a thorough review. I got a new mech mod and several Rba's last Friday and I've been tinkering with/vaping those all weekend. I did carry a fury and standard battery with me for back ups and can definitely say I do love these tanks. Huge capacity, fantastic TH and vapor, and last but not least great tasting vapor. They did not like temperature change too much. M1 left in a hot car will be leaky and you'll have some cleaning to do both in the air tube and on your battery. What bcc doesn't do that though?
More to come later!
Kanger T3S/MT3S coils work in the M1! A five pack of replacement heads are 5.96 at DiscountVapers. They also come in three different resistances 1.8, 2.2, and 2.5(which is the resistance of the stock heads).
Unfortunately I haven't vaped the M1 enough yet to do a thorough review. I got a new mech mod and several Rba's last Friday and I've been tinkering with/vaping those all weekend. I did carry a fury and standard battery with me for back ups and can definitely say I do love these tanks. Huge capacity, fantastic TH and vapor, and last but not least great tasting vapor. They did not like temperature change too much. M1 left in a hot car will be leaky and you'll have some cleaning to do both in the air tube and on your battery. What bcc doesn't do that though?
More to come later!
Review time!
Overall, I love it. It is an MT3 bottom coil.
Pro's
Being basically an MT3 it gives us in gogo nation an incredible variety of color, size, and finish choices.(cig easy if your reading this too, start stocking more options at comparable prices and I won't go anywhere else for my gogo gear). Any MT3/T3/miniT3 tanks will screw right on to the gogo M1 base! Also, like I said in the other post, you can use any T3S replacement head. Which gives us 3 different choices for resistance! Very little juice will be found on your battery. You can very easily rebuild these heads, just search for pro tank or evod rebuild. Also you can rewick these cotton for better flavor and wicking.
To re wick with cotton:I do this with the coil head screwed into the base, and the base on the device so it's easier to hold onto.Ffirst remove the little rubber thing from the top of the head. Then using needle nose pliers pull the grooved top part off exposing the wick and coil below. Using tweezers or something similar(fine tip needle nose pliers may do it, I use a hemostat from an old suture kit) to remove all the silica pieces of wick. Set them aside. Then pull on a cotton ball or qtip to make a long skinny thread of cotton that is narrow on the ends and slightly smaller than the diameter of the coil. Pull the cotton wick through, cut off the ends to the same length the silica wick used to stick out. Lay a few strands of silica back on top of the cotton wick(helps prevent popping hot juice from jumping up the mouth piece into your mouth). Then replace the top piece of the replacement head, slide the rubber thing back down and voila! Cotton wick, better flavor and wicking.
Con's
Being basically an MT3 it has all the same downsides. Cooler vape(only an issue if you like warmer vapor, I love the bcc vape). While it won't leak much onto your battery(unless you've lost an oring somewhere), it will gurgle occasionally. Especially when you're getting low on juice. To fix this grab a paper towel or napkin and twist a corner long and skinny enough to fit down the air tube and push it down there to absorb the liquid that has collected there causing the gurgle. Orings are easily misplaced while cleaning and filling. Especially one of them. Take note of how many there are and where they are when you first get your M1. If one is missing, you will have flooding/leaking issues. The biggest culprit is the little flat ....... right below where the replacement head screws on. That one likes to come off with your tank or not lie flat. Which it needs too to perform well and not leak.
Enjoy!
Overall, I love it. It is an MT3 bottom coil.
Pro's
Being basically an MT3 it gives us in gogo nation an incredible variety of color, size, and finish choices.(cig easy if your reading this too, start stocking more options at comparable prices and I won't go anywhere else for my gogo gear). Any MT3/T3/miniT3 tanks will screw right on to the gogo M1 base! Also, like I said in the other post, you can use any T3S replacement head. Which gives us 3 different choices for resistance! Very little juice will be found on your battery. You can very easily rebuild these heads, just search for pro tank or evod rebuild. Also you can rewick these cotton for better flavor and wicking.
To re wick with cotton:I do this with the coil head screwed into the base, and the base on the device so it's easier to hold onto.Ffirst remove the little rubber thing from the top of the head. Then using needle nose pliers pull the grooved top part off exposing the wick and coil below. Using tweezers or something similar(fine tip needle nose pliers may do it, I use a hemostat from an old suture kit) to remove all the silica pieces of wick. Set them aside. Then pull on a cotton ball or qtip to make a long skinny thread of cotton that is narrow on the ends and slightly smaller than the diameter of the coil. Pull the cotton wick through, cut off the ends to the same length the silica wick used to stick out. Lay a few strands of silica back on top of the cotton wick(helps prevent popping hot juice from jumping up the mouth piece into your mouth). Then replace the top piece of the replacement head, slide the rubber thing back down and voila! Cotton wick, better flavor and wicking.
Con's
Being basically an MT3 it has all the same downsides. Cooler vape(only an issue if you like warmer vapor, I love the bcc vape). While it won't leak much onto your battery(unless you've lost an oring somewhere), it will gurgle occasionally. Especially when you're getting low on juice. To fix this grab a paper towel or napkin and twist a corner long and skinny enough to fit down the air tube and push it down there to absorb the liquid that has collected there causing the gurgle. Orings are easily misplaced while cleaning and filling. Especially one of them. Take note of how many there are and where they are when you first get your M1. If one is missing, you will have flooding/leaking issues. The biggest culprit is the little flat ....... right below where the replacement head screws on. That one likes to come off with your tank or not lie flat. Which it needs too to perform well and not leak.
Enjoy!
I have to review the M1 tank as I just rec'd it in the mail and LUV it!!! I'm the one (although in the minority) that had problems with the Fury tank, although I know they are a good product, all 3 of them never worked well for me, tasted like plastic, didn't like the way they hit, leaked, then went to the Go carts and although better, didn't hit like I see the guys doing on Utube, like you had to work at it. Well, after vaping for several months I got back on Cigs in early July, was thinking about buying a Provari when I got paid in Sept to get back into vaping but saw the luv for the M1's and thought I'd give them a try for the $17.95 first.
This is what I was looking for, easy to use, EASY to hit, tastes GREAT, cool vape as ColdPunk states but I like that as well, looks good too but that's not what I was worried about. When I had the Fury's, I had to suck (people that watched me even commented on it, even with the Go carts), this is night and day difference, just a smooth hit, PLENTY of vape, I really like it!!!
Right now I'm using a regular Go Go bat, but instead of buying that Provari, I'm going to buy a SS Fury Bat, with matching SS M1 tanks, some more Grey Matter, and a new sand wedge I've been eyeing
.
This is what I was looking for, easy to use, EASY to hit, tastes GREAT, cool vape as ColdPunk states but I like that as well, looks good too but that's not what I was worried about. When I had the Fury's, I had to suck (people that watched me even commented on it, even with the Go carts), this is night and day difference, just a smooth hit, PLENTY of vape, I really like it!!!
Right now I'm using a regular Go Go bat, but instead of buying that Provari, I'm going to buy a SS Fury Bat, with matching SS M1 tanks, some more Grey Matter, and a new sand wedge I've been eyeing
.
The M1 tanks on a regular Go-Go or Go-Go Fury have delivered The Best Flavor, TH, and Vapor than anything I have ever tried over the last 3 1/2 years. I would have cranked out a video about them but my mini tripod broke and without it ... no can do video. I hope to get a replacement this week so I can finally begin my Go-Go/M1 opus.
This is the first ecig battery/tank combo where there are only positives and zero negatives. That, in my book anyway, spells perfection. Some other tank/clearo/battery combination might be as good, but I doubt it would be better.
This is the first ecig battery/tank combo where there are only positives and zero negatives. That, in my book anyway, spells perfection. Some other tank/clearo/battery combination might be as good, but I doubt it would be better.
I bought 6 Fury tanks just before the M1 Tanks came out. Only 4 of them worked. I am on my last one so I guess I will order the M1 and give them a try. If they do not work...
...send them to me. Lol I'll make them work. I've been taking these everywhere.
All I need now is a gogo dripper or genesis set up...
All I need now is a gogo dripper or genesis set up...
I had switched to a 510 thread recently because of the lack of choice in tanks for the Go-Go. I just couldn't justify buying new tanks every month when I could use one that only needed coil replacement. Plus the problems I've had with the tanks...
I think I'll be getting this new one next month and trying it out!
I think I'll be getting this new one next month and trying it out!
They will be exactly what you are looking for. Hope you enjoy them as much as I have.
Hope you enjoy them as much as I have.
Hello all-
I recently purchased a couple M1 tanks for my Go-Go, and I have to say that I LOVE them. They hit like a {Moderated} steam train! However, I do have a significant leaking problem on BOTH of them. Here is my experience:
I loaded the first one, and LOVED the hit and flavor, but within about 15 minutes, it started gurgling and letting through a LOT of juice through the mouthpiece. I also occasionally get juice on the battery. I tried the other one, and it had the same problem. I pulled them off and cleaned them, then examined all the rubber seals with a magnifying glass. The seals all looked fine on both of them. I also made sure that I tightened the middle atomizer part that screws into the base that attaches to the battery. I was also very careful in filling the tank part to make sure I wasn't getting juice in the center part that leads to the mouthpiece.
I also tried pulling off all the seals, wiping everything down thoroughly, and carefully reseating them, but the problem persists. FYI, I am using 2 different 50/50 PG/VG blends from FreedomSmokeUSA. The juice doesn't seem to make a difference. I have never had a leaking problem before using the standard Go-Go cartomizers (unless I stupidly overfilled them). I have also tried tightening them more/less to see if that had any effect, which it didn't.
I have seen posts about re-wicking these. Do you think that will make a difference? They work FANTASTIC at first so I would love to be able to switch to these from the regular carts.
Any help would be appreciated! You guys are the best! Thanks!
Dave
I recently purchased a couple M1 tanks for my Go-Go, and I have to say that I LOVE them. They hit like a {Moderated} steam train! However, I do have a significant leaking problem on BOTH of them. Here is my experience:
I loaded the first one, and LOVED the hit and flavor, but within about 15 minutes, it started gurgling and letting through a LOT of juice through the mouthpiece. I also occasionally get juice on the battery. I tried the other one, and it had the same problem. I pulled them off and cleaned them, then examined all the rubber seals with a magnifying glass. The seals all looked fine on both of them. I also made sure that I tightened the middle atomizer part that screws into the base that attaches to the battery. I was also very careful in filling the tank part to make sure I wasn't getting juice in the center part that leads to the mouthpiece.
I also tried pulling off all the seals, wiping everything down thoroughly, and carefully reseating them, but the problem persists. FYI, I am using 2 different 50/50 PG/VG blends from FreedomSmokeUSA. The juice doesn't seem to make a difference. I have never had a leaking problem before using the standard Go-Go cartomizers (unless I stupidly overfilled them). I have also tried tightening them more/less to see if that had any effect, which it didn't.
I have seen posts about re-wicking these. Do you think that will make a difference? They work FANTASTIC at first so I would love to be able to switch to these from the regular carts.
Any help would be appreciated! You guys are the best! Thanks!
Dave
Last edited by a moderator:
- Status
Similar threads
