Go-Go Specific: Thread for All things Go Go

[Devonmoonshire]

A carto will punch right threw those delrin caps as well.Ive done it with mine before.If you are talking about the beveled water faucet type ones?.

Yeah I tried that and these caps are pretty solid, plus this one is the only True MAP tank I have so I am going to go ahead and put some effort into getting it right the first time LOL At 28 bucks a pop they are too expensive to experiment on I think the drilling it out will also make it easier to insert the Go Cart as it will be a more smooth surface.

Nate aka Darth Vapor

 

[txtumbleweed]

Alrighty Folks, The Moment you have all been waiting for is here. The Go Go Pro is now available for purchase on the Cigeasy website. They are a limited edition and I have been biting my tongue waiting for them to get to the sit so I could spread the word. I saw the prototype at a vapemeet last weekend and it is beautiful.

Happy vaping all
Nate aka Darth Vapor

Frank at cigeasy dropped the price to 50.00 for the Go-go Pro. I couldn't resist at that price. lol
http://www.cigeasy.com/product_p/go-go pro batt.htm

 

[Ceegary]

One method was posted which I think is good....Take an old carto and grind the tip at about a 45% angle so you get a nice sharp edge that's slightly smaller than the carto. Place in the middle of the carto and gently tap with a hammer until it passes through.

 

[Devonmoonshire]

One method was posted which I think is good....Take an old carto and grind the tip at about a 45% angle so you get a nice sharp edge that's slightly smaller than the carto. Place in the middle of the carto and gently tap with a hammer until it passes through.

LOL Hey there Cigeary, yeah tried that one too Not so successful with a go cart as with a regular 510 or 901 cartomizer. I think the 99 cent drill bit is going to be my best bet for a good clean cut and fit. I figure if I take a Go Cart down to Lowe's I can get whatever size drill bit that fits snugly into the end of the go cart and then drill with it as that will give me a nice snug fit inside the delrin cap, but will still be enough movement to easily remove as well. Also going to pick up some O rings to put around the cart itself in order to add extra leak protection at each end. Theoretically this promises to be one heck of a Tank system indeed.

Nate aka Darth Vapor

 

[Chopper71]

LOL Hey there Cigeary, yeah tried that one too Not so successful with a go cart as with a regular 510 or 901 cartomizer. I think the 99 cent drill bit is going to be my best bet for a good clean cut and fit. I figure if I take a Go Cart down to Lowe's I can get whatever size drill bit that fits snugly into the end of the go cart and then drill with it as that will give me a nice snug fit inside the delrin cap, but will still be enough movement to easily remove as well. Also going to pick up some O rings to put around the cart itself in order to add extra leak protection at each end. Theoretically this promises to be one heck of a Tank system indeed.

Nate aka Darth Vapor

Please post any pictures when you are done.Maybe you,Ceegary,and myself can come up with one awesome tank.Call it the GO-GO GT (GT for Go Tank).I told kittypie I named hers the GO-GO Baby Bottle.

 

[Chopper71]

I'm in the process right now of uploading a video to YouTube on how I fill the tank.As soon as the slow pain in the rear is done I will post the video.Also I will be leaving very shortly to pick up some more supplies for the tanks.So hopefully when I get home the video will be done uploading and I can post it then.

 

[Cisme]

Thank you, Chopper. I am one of the lucky 5 and I can't wait!!

And I'm also looking forward to what you tinkers...tinkerers?... come up with. I'm not good at tinkering myself but I'm impressed with others' results!

 

[Cisme]

tx, thank you for the link for the carto cleaner. Someone here on ECF had come up with the same idea for cleaning and filling a carto, I think. Does it seem like there is just tons of new stuff in the past few months? I know I'm new but it seemed the first month there was not so much for cartos and a really good pv. Now I can't keep up.

And lol @ you for getting yet another pv! I hope you'll let us know how you like the new feature on the Go-Go Pro.

 

[Ceegary]

Nate, I made one and used it last night. What I did was cut the carto in half then ground the tip at 45%, worked fine. I'll make you one if you want, LMK.

LOL Hey there Cigeary, yeah tried that one too Not so successful with a go cart as with a regular 510 or 901 cartomizer. I think the 99 cent drill bit is going to be my best bet for a good clean cut and fit. I figure if I take a Go Cart down to Lowe's I can get whatever size drill bit that fits snugly into the end of the go cart and then drill with it as that will give me a nice snug fit inside the delrin cap, but will still be enough movement to easily remove as well. Also going to pick up some O rings to put around the cart itself in order to add extra leak protection at each end. Theoretically this promises to be one heck of a Tank system indeed.

Nate aka Darth Vapor

 

[txtumbleweed]

tx, thank you for the link for the carto cleaner. Someone here on ECF had come up with the same idea for cleaning and filling a carto, I think. Does it seem like there is just tons of new stuff in the past few months? I know I'm new but it seemed the first month there was not so much for cartos and a really good pv. Now I can't keep up.

And lol @ you for getting yet another pv! I hope you'll let us know how you like the new feature on the Go-Go Pro.

Yeah I think I need to have my head examined or join the PVA! There has been a lot of new fat bat PV's in the last few months but it has been pretty much a continuous change of products since I started 19 months ago. They do get better all the time. Some guys addiction is mods, some people it is juice, at least mine is fat bats which are cheaper. lol I'm pretty sure I have every 650-1300 mah battery they have made except for a couple of rebranded ones. I wouldn't have bought the Pro at the 80.00 but when he dropped them to 50.00 I was able to justify it to myself at least temporarily long enough to get the order in. lol The good thing is if the government ever starts taxing or outlaws them I'm probably set for the duration of my life time. lol

 

[Chopper71]

Okay here is the how I fill the tank video.Please keep in mind I had not been up that long when I made this.So please bare with me in the video.

 

[txtumbleweed]

Nice video chopper! I haven't tried a tank yet so I'm looking forward to trying one.

 

[Chopper71]

Nice video chopper! I haven't tried a tank yet so I'm looking forward to trying one.

Thanks man it took forever to upload to YouTube.Soon as I get everything I will get yours made and shipped back to you fast.

 

[GoodDog]

Very cool chopper!! I'm so excited to try the tank mod. Thank you so much!!

 

[Chopper71]

Very cool chopper!! I'm so excited to try the tank mod. Thank you so much!!

You are welcome....

 

[Chopper71]

Okay here is a video on the go-go tank I made.Thanks to txtumbleweed for sending me a go-go battery,charger,and some carts I was able to test the tank.Well the video will speak for itself.Please pay no attention to how mean I look it was a very long and stressful day.I'm really a very nice guy lol.

 

[MissP]

And NO burnt taste?????? I CANT WAIT!!!!!!!

Man alive, if I tried that with a go-cart, I'd be tasting a nasty cart!

Great video, and you dont look mean at all!

 

[GoodDog]

I'd be face down on the floor if I vaped like that! LOL I'm so excited!!

 

[Chopper71]

And NO burnt taste?????? I CANT WAIT!!!!!!!

Man alive, if I tried that with a go-cart, I'd be tasting a nasty cart!

Great video, and you dont look mean at all!

NO burnt taste what so ever or I would not have hit it like a wild man lol.I was asked why I looked so mean by my wife lol.


EDIT: MrsDash I did get your package today so just PM when you are ready for it....

 

[Chopper71]

I'd be face down on the floor if I vaped like that! LOL I'm so excited!!

I have 3 tanks made so far.When I get everyone's cartos I will try and ship all them out at one time.I will finish the rest tomorrow.I'm excited for you but please don't try and vape like I did,because I'm a professional stuntman lol.....really I'm not I just play one on TV...HAHAHA.....just being funny.