Any suggestions? I have made sure everything is lubed and tightened but I get a steady drip from the collection tank center post.
All suggestions welcomed.
Robin
All suggestions welcomed.
Robin
Got A GGTS! But the juice leaks from the UFS center post
- Thread starter aka_Queenie
- Start date
- th_trl_thread_readers 0
- Status
Have you checked the o-rings that are around the center post there are 3 of them and to do this requires taking the center post apart.... this would be the piece that contact the battery and is the base piece to your collection tank/air control....
Ohhhh, that my be it. There is no o-ring on the outside, I will try to get that nut off and look in there to see if the 2 others are in there.
Thanks, Mr. K!
Thanks, Mr. K!
That was it, alright. On the post itself (inside where the battery plunger o-rings go) there was only one broken bit of an o-ring left. :O I'll go see if I can round up some spares today.
Thanks again!
Thanks again!
Doubtful you'll find any locally. If you send me the dimensions I can drop them in the mail. This will get you going until you can order a set
Thanks, Para. I was going to drop by Harbor Freight for the o-ring set Mr. K suggested in another post. I have no idea how to measure these babies. They are tiny!
Just wanted to be sure we are on the same page; like others posted; it's 2 x 1
If you can't locate them send your address and I'll drop them in the mail
You guys are the best. I'll report back s soon as I get them and try them out. All three on the post are 2mm x 1mm? The pics I saw looked like the external o-ring was thicker. Then gain my eyes aren't what they used to be.
That is the only size Harbor Freight does not have in those kits I have mentioned before your best bet is to try a true value hardware store or even a Napa auto parts as they may carry such a small size... the o-ring kits from Harbor Freight are great for any other size you may need except the tiny center post that your needing....
You need 2 2mm/1mm o rings and 1 4mm/1.5mm
Remove the assembly completely pin metal nut and plastic piece. Put the latge o ring on the pin first then the metal nut. Then put the 2 2mm/1mm o rings on the pin and slide them down. Put on the plastic and carefully work it over the 2 small o rings. Screw the metal nut into the plastic hand tight (don't over tighten) then screw the plastic into the connector.
Remove the assembly completely pin metal nut and plastic piece. Put the latge o ring on the pin first then the metal nut. Then put the 2 2mm/1mm o rings on the pin and slide them down. Put on the plastic and carefully work it over the 2 small o rings. Screw the metal nut into the plastic hand tight (don't over tighten) then screw the plastic into the connector.
You guys totally rock. I got the o-rings now to try again. Does that black piece really need to come off? It's on there tight as a drum.
Asomeness! It works like a charm. Still fiddling with the juice flow but this is great. I'm vaping away now.
I want to thank you all again. All of you took the time to answer questions you've probably answered 1000 times and I soooo appreciate it.
I hate being the newbie.
Robin
I want to thank you all again. All of you took the time to answer questions you've probably answered 1000 times and I soooo appreciate it.
I hate being the newbie.
Robin
fright, the 4/1,5 o-ring is only for UFS. If we put it on GGTS we will not be able to vape a 901 atomizer buddy
What, Mr K? No fava beans??
Imeo, my UFS was leaking from the battery post thingy. Fright gave me perfect instructions and I am happy to say it is my best vape ever.
I was going to keep this one and give Phi's gorgeous #70 to Hubby for Christmas but I am now an official GG hoarder.
They're both mine.
Take care, all,
Robin
Imeo, my UFS was leaking from the battery post thingy. Fright gave me perfect instructions and I am happy to say it is my best vape ever.
I was going to keep this one and give Phi's gorgeous #70 to Hubby for Christmas but I am now an official GG hoarder.
They're both mine.Take care, all,
Robin
Oups sorry, fright was right. I was talking about GGTS but your issue was with UFS aka.
I am very sorry fright but the first words of thread's title gave me the wrong impression!
I am very sorry fright but the first words of thread's title gave me the wrong impression!
- Status
Similar threads
- Locked
