Got clones?

[freeall]

Tobh Atty with center post hole on the side lol. Thanks, China.




Terrible picture, I know. Anyone wanna enlighten me how to post the big pictures all the cool people around here do?

 

[xtwosm0kesx]

Well there's your problem!....

Dunno if the screw on the TOBH's 510 secures the middle post or not.

If it does, loosen the screw and turn the post straight, re-tighten.

If it doesn't grab ahold of the center pin with pair of pliers and gently rotate it in the insulator till it's straight.

Best of luck!

 

[Robino1]

Tobh Atty with center post hole on the side lol. Thanks, China.


View attachment 417004

Terrible picture, I know. Anyone wanna enlighten me how to post the big pictures all the cool people around here do?

Use imgur or photobucket to host the pictures. Imgur is a free site now. Once you get your picture on Imgur, click on the side tab that says "BBCode (message boards & forums)". Copy the code and paste it into that picture frame icon. Make sure you uncheck the box that says "Retrieve remote file and reference locally".

Your pictures should show up big like this:

 

[freeall]

It won't turn.

Whatever though, It'll just go into the drawer with the rest of the crap I never use.

 

[Gummy Bare]

It will turn, trust me. Either unscrew the copper contact screw that goes into the post to loosen it up and reposition it; or find a screw driver that will fit into the post hole and force it back to center. I've seen a lot of TOBH clones with jankey copper screw threads, once their loosened sometimes they don't wanna get tight again.... which makes the center post spin like crazy when your trying to make a build, so if you can force it with the screw driver in the post hole back to center that would be your best bet because the post would still be nice and tight.

 

[Froth]

It won't turn.

Whatever though, It'll just go into the drawer with the rest of the crap I never use.

That's just giving up, I could have that center post fully functional in 5 minutes...

 

[InTheShade]

Use imgur or photobucket to host the pictures. Imgur is a free site now. Once you get your picture on Imgur, click on the side tab that says "BBCode (message boards & forums)". Copy the code and paste it into that picture frame icon. Make sure you uncheck the box that says "Retrieve remote file and reference locally".

Your pictures should show up big like this:

Clones....

 

[crxess]

It won't turn.

Whatever though, It'll just go into the drawer with the rest of the crap I never use.

It will turn!
Loosen the 510 pin from the bottom.
Tap it lightly once loose to unseat.
Twist counter clock to position.
Tighten 510 center pin.

 

[roxynoodle]

Yes, it can be fixed. I had to turn the positive post on my authentic Rose v2 Not exactly an inexpensive authentic either!

 

[Jun Andaakabaa]

i had the exact same problem with my tobh clone, what i did was wrapping a tiny bit of thread seal tape at the bottom tip of copper pin and tightens it down. Now, is not as loose but still spins everytime i screw the center post tight so gotta use pillar to prevent that, Overall works for me.
Im not sure it be safe using that tape but thats the only way i came up with after hours of struggles and to realize that my copper pin thread were actually striped*sigh*my one and only rda. Hope this help.