GP CE2s and GP CE2 Humongomizers are in!
- Thread starter dirt2suck
- Start date
- th_trl_thread_readers 0
- Status
I just went back and pulled out the prior e-mail, they were listed at the bottom under "new items" but when you clicked on the specials link they came up on that page, so I think that's where the confusion was on my part,
I'm sorry.....
I'm sorry.....
I do see how the confusion was, so I apologize for it.
I will have to put the Visions on sale (nice sale) in the near future!
I will have to put the Visions on sale (nice sale) in the near future!
Considering buying some of these. A couple ?'s for the GP folks:
1) Are people having leaking issues? I want to replace my volt carto's with these (808 ce2), but concerns around leaking in my pocket when on the go.
2) Anyone using these on SI hardware (808)?
3) I assume these are 35nm in length (Standard carto)?
Thanks,
Chris
1) Are people having leaking issues? I want to replace my volt carto's with these (808 ce2), but concerns around leaking in my pocket when on the go.
2) Anyone using these on SI hardware (808)?
3) I assume these are 35nm in length (Standard carto)?
Thanks,
Chris
I will let anyone chime in on your questions....
but for #3 as to size, are you referring about the metal CE2's?
otherwise the H-mizers are much bigger in diameter and length than standard carto size.
We only have the 808 avail in metal CE2 unless you wish to use a PV adapter.
but for #3 as to size, are you referring about the metal CE2's?
otherwise the H-mizers are much bigger in diameter and length than standard carto size.
We only have the 808 avail in metal CE2 unless you wish to use a PV adapter.
I went ahead and a pack. See how I like them, can't go wrong at that price. Thanks rob.
When are the 3.3mls coming back in stock??
Or can I just order it in parts?? Never had one so want to make sure I get everything!!!
Or can I just order it in parts?? Never had one so want to make sure I get everything!!!
Last edited:
Parts are the answer, as you can still make a full setup with what is left.
We may not stock these again...?
We may not stock these again...?
Could someone please tell me the actual measurements of the two different sizes of Humongomizer sleeves?
I have PM'd and emailed and hunted all over, but nowhere can I find an actual DIMENSION for how long these are.
The caps are the same for either, but I would like to know sleeve length so I can order the right size.
Thanks!
I have PM'd and emailed and hunted all over, but nowhere can I find an actual DIMENSION for how long these are.
The caps are the same for either, but I would like to know sleeve length so I can order the right size.
Thanks!
brb, let me measure I have each...........
Large is 2 1/8"
Smaller is 1 9/16"
hth!
Also as a side note, if you have shell/cover, check the way it connects, these click on, no threading.
Large is 2 1/8"
Smaller is 1 9/16"
hth!
Also as a side note, if you have shell/cover, check the way it connects, these click on, no threading.
Last edited:
THANK YOU Vchick! It helps very much indeed. I'll need the long one, then.
I saw a photo SOMEwhere of the cap connection, so I did realize that end is not threaded - just a 1/4 turn clicks it into place, right?
I have a similar product with a threaded cap - but since I recently lost its cap, now I want a replacement for that protective setup. It was the perfect accessory for an eGo battery, to use up the old XL CE2s I still have left from a co-op (the first, cracking-tube kind). The sleeve really protects the vulnerable battery end, eliminating worry about accidental juice dumping or leaks. The cap makes it all quite pocket and purse friendly even with a drip tip.
So Rob, now I can turn all those goodies in my cart into vapemail! I did get your email response, it just didn't tell me what I needed to know. There were so many varieties of the early CE2s, and so many different vendor names used, it was terribly confusing... I'm not looking for a guarantee it will be compatible, but since the "CE2 XL Edition 2" had the skinniest tubes of any - I expect it will work just fine for my needs, now I know what length to get.
Yay ECF community! Vchick, I'll wave gratefully in your direction when I drive through Ohio in a couple of weeks. Thanks so much!
I saw a photo SOMEwhere of the cap connection, so I did realize that end is not threaded - just a 1/4 turn clicks it into place, right?
I have a similar product with a threaded cap - but since I recently lost its cap, now I want a replacement for that protective setup. It was the perfect accessory for an eGo battery, to use up the old XL CE2s I still have left from a co-op (the first, cracking-tube kind). The sleeve really protects the vulnerable battery end, eliminating worry about accidental juice dumping or leaks. The cap makes it all quite pocket and purse friendly even with a drip tip.
So Rob, now I can turn all those goodies in my cart into vapemail! I did get your email response, it just didn't tell me what I needed to know. There were so many varieties of the early CE2s, and so many different vendor names used, it was terribly confusing... I'm not looking for a guarantee it will be compatible, but since the "CE2 XL Edition 2" had the skinniest tubes of any - I expect it will work just fine for my needs, now I know what length to get.
Yay ECF community! Vchick, I'll wave gratefully in your direction when I drive through Ohio in a couple of weeks. Thanks so much!
I am looking forward to checking it out.
Sadly the parts are not still on sale today, but that's okay. I just want to be able to use up those old CE2s - once I finally learned how to mod the cup seal, I liked 'em a lot, and with a protective sleeve they can go anywhere with me. Crossing fingers for a successful experiment!
I wish I had seen Rob's product initially, before I got my first one - spare/replacement parts are good for customers, although it must be a pain for the vendors who stock them, especially since vaping products evolve so fast.
Sadly the parts are not still on sale today, but that's okay. I just want to be able to use up those old CE2s - once I finally learned how to mod the cup seal, I liked 'em a lot, and with a protective sleeve they can go anywhere with me. Crossing fingers for a successful experiment!
I wish I had seen Rob's product initially, before I got my first one - spare/replacement parts are good for customers, although it must be a pain for the vendors who stock them, especially since vaping products evolve so fast.
I hope all turns out ok.
I will check into the sale prices, as they are supposed to be on clearance (sale until sold out)
Ohh yes, they are all different.
Every manufacturer makes them different, some compatible some not,
and also different quality.
The H-mizers still live up to their GP quality...beating RS hands down.
Quite honestly, I am not even sure if RS still exists.
The H-mizer manufacturer has too many new products, and I am really
thinking the standard metal CE2, CE2 clearomizer and CE2 H-mizers are worth keeping.
I had stocked such a large amount, that even the clearance price alone has been 6 months and going!
Lets hope I can restock at a good price, to pass along.
Maybe slip one new item in the GP CE2 line!
I will check into the sale prices, as they are supposed to be on clearance (sale until sold out)
Ohh yes, they are all different.
Every manufacturer makes them different, some compatible some not,
and also different quality.
The H-mizers still live up to their GP quality...beating RS hands down.
Quite honestly, I am not even sure if RS still exists.
The H-mizer manufacturer has too many new products, and I am really
thinking the standard metal CE2, CE2 clearomizer and CE2 H-mizers are worth keeping.
I had stocked such a large amount, that even the clearance price alone has been 6 months and going!
Lets hope I can restock at a good price, to pass along.
Maybe slip one new item in the GP CE2 line!
Recived my CE2 Humongomizers and 6 ml eGo Cartomizers on Friday. Super fast delivery, thank you!
Love the 6 ml eGo Cartomizers!!! One will last me all day and into the next. After i figured out a quick way to fill them lol
For some reason I can not get the CE2 to fit my battery though. Is there a adaptor I need? I am thinking about returning them, I have 5 and only opened 1.
Thanks!
Love the 6 ml eGo Cartomizers!!! One will last me all day and into the next. After i figured out a quick way to fill them lol
For some reason I can not get the CE2 to fit my battery though. Is there a adaptor I need? I am thinking about returning them, I have 5 and only opened 1.
Thanks!
Hi Butterfly4. I use the 510 batt to eGo Atom adaptor PV Adapters found in the dropdown menu on this page about half way down the list. It works perfectly on both the humongomizers and the GP eGo2.4cc ,even with the Kanger 1.6. If the eGo 6ml fits your battery then so should the humongomizer.... what doesnt fit correctly on the h-mizers to your battery? I have a whole bunch of them and may be able to point you in the right direction.
- Status
Similar threads
